Wind meter with temperature measurement function Uni-T UT363 UT363 mini wind speed and temperature meters. UT363 measures wind speeds up to 30 m/s (108 km/h) Code H0563 ✗ Out-of-Stock Price €24.37
SONOFF TH Elite Temperature and humidity monitoring smart switch - THR316D SONOFF TH Elite is an ESP32-based temperature and humidity monitoring smart switch. Code WS064 Backorder Price €20.58
VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out). The interface is very easy to use because all operations are controlled by the internal DRAM memory controller. VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features: - Input voltage: 2.5V-3V - Controller: AL422B FIFO buffer - Operating power: 60mW / 15fps VGA YUV - VGA resolution: 640x480 pixels (30fps), - Maximum frame rate: 30fps VGA - Flicker: 50Hz / 60Hz auto detection - Lens size: 1/6 " - Angle of view: 25 ° - Sensitivity: 1.3V / (lux- sec) - SCCB (Serial Camera Control Bus) interface - Output format: 8 Bits - YUV /> Code M0114 Available Price €12.06
SONOFF AL010 RJ9 Adaptor SONOFF AL010 RJ9 Adapter dedicated to sensors compatible with the previous Sonoff TH16 series, where there was a Mini Jack connector. Suitable for temperature and humidity sensor AM2301 and Si7021, waterproof temperature sensor DS18B20 and soil moisture sensor MS01. Code WS075 Available Price €2.31
Sonoff sensor AM2301 Sonoff S26 is the freshest version of an intelligent socket made for EU power standards. It is extremely user friendly - you only need to plug it in your socket and pair with your device and it should run! Code WS009 Available Price €5.69
SONOFF MS01- Smart Soil Moisture Sensor MS01 works with SONOFF TH10/16 to accurately measure soil moisture and send data to your mobile phone. MS01 can regularly water and check soil moisture anytime and anywhere to make your flowers grow healthier. This is an accessory used in SONOFF TH10 / TH16. Code WS044 ✗ Out-of-Stock Price €12.31
Air quality sensor ZP07-MP503 Gas detection The ZP07-MP503 air quality module offers high sensitivity with low power consumption and long life. Calibration before shipment from 10 seconds to 3 minutes max. with automatic warm-up function. Automatic fault check. Code S0150 Available Price €4.50
PMS5003 High Accuracy Particle Concentration Sensor The sensors can be integrated into a variety of instruments associated with a concentration of airborne particles to improve equipment, provide timely concentration, and have Exact data. Present the laser that scatters products on airborne particles, at the same time at a specific angle collect scattered light, changing the intensity curve that scatters over time. The microprocessor uses the algorithm based on the MIE theory to deduce the grain size contained in the air and the concentration of the particles per unit and quantity. Characteristic: - Power supply: 4.5-5.5 VDC - Measurement range: 0.3-1.0ï¼ ›1.0-2.5ï¼› 2.5-10 µm (micrometer) - Accuracy of count: 50%@> Code S0046 Available Price €23.06
Air purifier with HEPA filter This air purifier uses a HEPA filter to safely remove viruses, bacteria, mold, mildew, dander, etc. Filters up to 99.5% of dust, pollen, tobacco smoke, mould spores and pet dander. Keeps the environment clean. Code VE018 Last items in stock Price €73.55
NDIR CO2 Sensor MH-Z14A Carbon dioxide detection MH-Z14A NDIR infrared gas module is a small size and common type sensor using the non-dispersive infrared (NDIR) principle to detect the existence of CO2 in air, with good selectivity, non-oxygen dependent and long lifetime. Code S0149 Available Regular price €24.75 -€6.00 Price €18.75
MQ-135 Air Quality Sensor High sensitivity to Ammonia (NH3), Nitrogen oxides (NOx), Alcohol, Sulphides, Benzene (C6H6), CO2, smoke and other harmful gases. The MQ-135 sensor is to sensible for other gasses in the air so that is not possible to get good values for CO2 from it. MQ-135 Air Quality Sensor features:- Main chip: MQ-135 natural gas sensor and comparator LM393- Working voltage: 5V- Current: 150mA- Digital output: TTL 0/1- Analog output: analog voltage sensing value- Quick response features:- Detection concentration: 10ppm - 300ppm NH3 10ppm - 1000ppm Benzene 10ppm - 300ppm Alcohol- Adjustable sensitivity with the potentiometer- Size: 32mm x 20mmx 18mm Code S0034 ✗ Out-of-Stock Price €2.02
Grove - Air Quality Sensor v1.3 - Arduino Compatible The Grove - Air Quality Sensor v1.3 is designed to test indoor air quality. It can react to carbon monoxide, alcohol, acetone, paint thinner, formaldehyde and other slightly toxic gases. Compatible with 5V and 3.3V power supplies, it can work with Arduino and Raspberry Pi. It features long-term stability and low power consumption. It's the ideal choice for monitoring air quality in your projects. Code SS052 Available Price €9.83
MH-Z19C Infrared Sensor module 5000ppm CO2 monitor HVAC PWM output UART CO2 sensor model MH-Z19C. High precision working voltage 5.0±0.1V DC. The measuring range is between 0 and 5000 ppm. It has a low power consumption. UART and PWM output. Code S0044 Backorder Price €24.37
Dust Sensor Module PPD42NS PM2.5 This module is a dust sensor capable of detecting more than one micron of dust particles. It has two types of output: output of 4V high-level signal for a clean environment and 0.7V low-level signal for a particle-laden environment. Its power supply is 5VDC and the particle detection range is maximum at 8000 units per 283ml. Dust Sensor Module PPD42NS PM2.5 features: - Supply voltage: 5VDC - Working current: 90mA - Sensitivity: 0.5V / ( 0.1 mg / m3) - Particle detection minimum value: 1 micron - Output mode: Hi = 4V impulses (clean environment); Lo = 0.7V (charged environment) - Temperature working: 0-45 ° C - Working humidity: 0-90% RH - PCB size: 59x45x22 mm Code S0123 Available Regular price €9.83 -€2.00 Price €7.83
Nova PM Sensor SDS011 - Air quality sensor - High precision laser PM2.5 Dust test module Air quality sensor with high precision whose SDS011 uses laser dispersion to detect particle concentration between 0.3 and 10 um in the air. With digital output by USB (UART) and built-in fan. It is a powerful sensor, fast (response less than 10s), accurate and reliable. Code S0142 Last items in stock Price €27.19
Air Monitoring HAT for Raspberry Pi This HAT is an open source portable sensor that provides the level of suspended particulate matter quantity with its mass. It has a powerful and high-tech PMSA003 sensor that provides the information of suspended particulate matter (PM1.0, PM2.5, PM10) in the air per unit volume. Code RA127 ✗ Out-of-Stock Price €47.02
MH-Z19C Infrared Sensor module 5000ppm CO2 monitor HVAC PWM output UART CO2 sensor model MH-Z19C. High precision working voltage 5.0±0.1V DC. The measuring range is between 0 and 5000 ppm. It has a low power consumption. UART and PWM output. Code S0044 Backorder Price €24.37
NDIR CO2 Sensor MH-Z14A Carbon dioxide detection MH-Z14A NDIR infrared gas module is a small size and common type sensor using the non-dispersive infrared (NDIR) principle to detect the existence of CO2 in air, with good selectivity, non-oxygen dependent and long lifetime. Code S0149 Available Regular price €24.75 -€6.00 Price €18.75
All-in-one air quality sensor ZPHS01B: CO2, PM2.5, CH2O, O3... ZPHS01B is an all-in-one air quality module, which integrates laser dust sensor, infrared CO2 sensor, electrochemical formaldehyde, ozone and carbon monoxide sensors, VOC sensor, NO2 sensor, temperature and humidity sensor. Code S0151 ✗ Out-of-Stock Regular price €120.58 -€6.00 Price €114.58
Air quality sensor ZP07-MP503 Gas detection The ZP07-MP503 air quality module offers high sensitivity with low power consumption and long life. Calibration before shipment from 10 seconds to 3 minutes max. with automatic warm-up function. Automatic fault check. Code S0150 Available Price €4.50
PMS5003 High Accuracy Particle Concentration Sensor The sensors can be integrated into a variety of instruments associated with a concentration of airborne particles to improve equipment, provide timely concentration, and have Exact data. Present the laser that scatters products on airborne particles, at the same time at a specific angle collect scattered light, changing the intensity curve that scatters over time. The microprocessor uses the algorithm based on the MIE theory to deduce the grain size contained in the air and the concentration of the particles per unit and quantity. Characteristic: - Power supply: 4.5-5.5 VDC - Measurement range: 0.3-1.0ï¼ ›1.0-2.5ï¼› 2.5-10 µm (micrometer) - Accuracy of count: 50%@> Code S0046 Available Price €23.06
Air purifier with HEPA filter This air purifier uses a HEPA filter to safely remove viruses, bacteria, mold, mildew, dander, etc. Filters up to 99.5% of dust, pollen, tobacco smoke, mould spores and pet dander. Keeps the environment clean. Code VE018 Last items in stock Price €73.55
NDIR CO2 Sensor MH-Z14A Carbon dioxide detection MH-Z14A NDIR infrared gas module is a small size and common type sensor using the non-dispersive infrared (NDIR) principle to detect the existence of CO2 in air, with good selectivity, non-oxygen dependent and long lifetime. Code S0149 Available Regular price €24.75 -€6.00 Price €18.75
MQ-135 Air Quality Sensor High sensitivity to Ammonia (NH3), Nitrogen oxides (NOx), Alcohol, Sulphides, Benzene (C6H6), CO2, smoke and other harmful gases. The MQ-135 sensor is to sensible for other gasses in the air so that is not possible to get good values for CO2 from it. MQ-135 Air Quality Sensor features:- Main chip: MQ-135 natural gas sensor and comparator LM393- Working voltage: 5V- Current: 150mA- Digital output: TTL 0/1- Analog output: analog voltage sensing value- Quick response features:- Detection concentration: 10ppm - 300ppm NH3 10ppm - 1000ppm Benzene 10ppm - 300ppm Alcohol- Adjustable sensitivity with the potentiometer- Size: 32mm x 20mmx 18mm Code S0034 ✗ Out-of-Stock Price €2.02
Grove - Air Quality Sensor v1.3 - Arduino Compatible The Grove - Air Quality Sensor v1.3 is designed to test indoor air quality. It can react to carbon monoxide, alcohol, acetone, paint thinner, formaldehyde and other slightly toxic gases. Compatible with 5V and 3.3V power supplies, it can work with Arduino and Raspberry Pi. It features long-term stability and low power consumption. It's the ideal choice for monitoring air quality in your projects. Code SS052 Available Price €9.83
MH-Z19C Infrared Sensor module 5000ppm CO2 monitor HVAC PWM output UART CO2 sensor model MH-Z19C. High precision working voltage 5.0±0.1V DC. The measuring range is between 0 and 5000 ppm. It has a low power consumption. UART and PWM output. Code S0044 Backorder Price €24.37
Dust Sensor Module PPD42NS PM2.5 This module is a dust sensor capable of detecting more than one micron of dust particles. It has two types of output: output of 4V high-level signal for a clean environment and 0.7V low-level signal for a particle-laden environment. Its power supply is 5VDC and the particle detection range is maximum at 8000 units per 283ml. Dust Sensor Module PPD42NS PM2.5 features: - Supply voltage: 5VDC - Working current: 90mA - Sensitivity: 0.5V / ( 0.1 mg / m3) - Particle detection minimum value: 1 micron - Output mode: Hi = 4V impulses (clean environment); Lo = 0.7V (charged environment) - Temperature working: 0-45 ° C - Working humidity: 0-90% RH - PCB size: 59x45x22 mm Code S0123 Available Regular price €9.83 -€2.00 Price €7.83
Nova PM Sensor SDS011 - Air quality sensor - High precision laser PM2.5 Dust test module Air quality sensor with high precision whose SDS011 uses laser dispersion to detect particle concentration between 0.3 and 10 um in the air. With digital output by USB (UART) and built-in fan. It is a powerful sensor, fast (response less than 10s), accurate and reliable. Code S0142 Last items in stock Price €27.19
Air Monitoring HAT for Raspberry Pi This HAT is an open source portable sensor that provides the level of suspended particulate matter quantity with its mass. It has a powerful and high-tech PMSA003 sensor that provides the information of suspended particulate matter (PM1.0, PM2.5, PM10) in the air per unit volume. Code RA127 ✗ Out-of-Stock Price €47.02