2x CNY70 Reflective Optical Sensor with Transistor Output 2x CNY70 Reflective Optical Sensor with Transistor Output features: - Reflective optical sensor with transistor output- Reflective optical coupler used to distinguish edge or line detection- Dimensions of the housing are 7 x 7 x 6 mm- Supply voltage: 5V- Maximum diode current: 50 mA- Maximum collector-emitter voltage: 32V- Maximum collector current of 50 mA- Quantity: 2 units Code S0121 Available Price €0.74
Qwiic cable protoboard - 4 pin This cable is an essential element of the Qwiic ecosystem - it enables connection between the protoboard and any device with a Qwiic connector. With all the benefits of Qwiic at hand - no soldering required, easy 1-second hookup on click and dismantling. The cable is 150mm long. Wires are color coded according to scheme: Code SP020 Available Price €1.99
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Qwiic cable 50mm It is a basic cable for connection of Qwiic elements featuresd with two JST 1mm connectors. The Qwiic cables are color coded and the connector is polarized making it easy and quick to connect the components. The cable is 50mm long Code SP040 Available Price €1.19
Qwiic cable 100mm It is a basic cable for connection of Qwiic elements featuresd with two JST 1mm connectors. The Qwiic cables are color coded and the connector is polarized making it easy and quick to connect the components. The cable is 100mm long Code SP022 Available Price €1.99
Relay SRD-05 DC-2P 5V 10A SPDT - SRD-05VDC-SL-C Relay SRD-05 DC-2P 5V 10A SPDT features:- Supply voltage: 5V- Output Current: 10A- For power switching with 5V DC signals - Microcontroller, Arduino, Electronica Code RL011 Available Price €0.69
Limit Switch with Wheel - 5A 250 Vac - 1 switched - Arduino compatible Limit Switch with Wheel - 5A 250 Vac - 1 switched - Arduino features: -Micro KW12-3 on / off switch -Max Current: 5A -AC voltage: 125-250V -Operating temperature: -40 to 70 degrees C -Quantity: 2 units Code K0018 Available Price €0.59
3x Power LED Aluminum Heat Sink 3W 5W 3x Power LED Aluminum Heat Sink 3W 5W features: - Outside diameter: 36mm- Height: 30mm- Quantity: 3 units Code P0038 Available Price €1.95
Relay SRD-12 DC-2P 12V 10A SPDT Relay SRD-12 DC-2P 12V 10A SPDT features:- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- For power switching with 12V DC signals - Microcontroller, Arduino, Electronica Code RL012 Available Price €0.98
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59
Fan 12V 2x Cables PC CPU case Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 15mm Code I0055 Available Regular price €3.49 -€0.90 Price €2.59
4-Channel 5V 10A Relay Module Characteristic: - Channels: 4 (independent protected by Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - Indicator LED: For each channel - Dimensions: 54x 72mm - 5V Optocoupled 4-Channel Relay Module - This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for the remote control + 4-channel 315 MHz IC2262 receiver: - Relay Module Programming 5V 10A 4 Channel with remote control + 4 channel receiver Code RL007 Available Price €3.99
16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83
Momentary Push button Switch N/A NO 2A 36V 16mm Stainless Steel Momentary Pushbutton Switch N/A NO 2A 36V 16mm Stainless Steel features: - Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 36VDC- Type of terminal: Screw- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0094 Available Price €4.49
Metal Switch 16mm Stainless Steel Latching Metal Switch 16mm Stainless Steel features:- For panel N/A NO 2A 36V Stainless Steel On/Off- Type of operation: On/Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A/36VDC- Type of terminal: Screw- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0095 Available Price €3.69
Flat Cable 1m AWG28 1.27 10 Pins Colors The cables are in 10 different colors Flat Cable 1m AWG28 1.27 10 Pins Colors features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0003 Available Regular price €3.49 -€0.51 Price €2.98
Flat Cable 1m AWG28 1.27 Gray 10 Pins Flat Cable 1m AWG28 1.27 Gray 10 Pins features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0002 Available Price €2.50
12V Push Button LED Red 16mm 12V Push Button LED Red 16mm features:- Momentaneo panel N/A NO with return 2A Steel- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0096 Available Price €5.89
12V Push Button LED Green 16mm 12V Push Button LED Green 16mm features:- Momentaneo panel N/A NO with return 2A Steel- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0097 Available Price €5.89
12V Momentary LED Push Button Switch White 16mm N/A NO 12V Momentary LED Push Button Switch White 16mm N/A NO features: - Type of operation: Momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C+ Code K0098 Available Price €5.89
12V Momentary LED Pushbutton Blue 16mm N/A NO 12V Momentary LED Pushbutton Blue 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Blue Code K0099 Available Price €5.89
Cable Silicona SIF 0.5mm2 Cu -50...+180°C Black flexible - roll 100m Flexible multi-conductor (stranded) SIF type flexible copper cable with silicone insulation. Conductor; silicone; SIF; 1 conductor; Cu; 0.50mm2; black; silicone; halogen free; heat resistant; -50...+180°C; 300/500V; 100m coil; Lappkabel; RoHS; OLFLEX HEAT 180 SIF; 2.1mm; 1x0.50mm2. Code K0101 Available Price €69.95
Silicone Cable Li2G 0.5mm2 10A 1kV -50÷180°C Black Flexible Double silicone insulated cables. Extremely flexible. The inner insulation is white which makes it easy to see if there is any damage. Resistant to low and high temperatures. Ideal for measuring cables used for dangerous voltages. Code K0109 Available Price €2.85
Silicone Cable Li2G 0.5mm2 10A 1kV -50÷180°C Red Flexible Double silicone insulated cables. Extremely flexible. The inner insulation is white which makes it easy to see if there is any damage. Resistant to low and high temperatures. Ideal for measuring cables used for dangerous voltages. Code K0108 Available Price €2.85
300 Pieces LED Diodes 3mm 5mm red green yellow blue white Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white. Code P0104 Available Regular price €7.95 -€1.46 Price €6.49
Folding Plastic Stand for Cell Phones eBooks Smartphone Black Folding Plastic Stand for Cell Phones eBooks Smartphone Black features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: Black- Quantity: 1 unit Code E0001 Available Price €1.29
Foldable Plastic Stand for Cell Phones eBooks Smartphone White Foldable Plastic Stand for Cell Phones eBooks Smartphone White features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: White- Quantity: 1 unit Code E0002 Available Price €1.79
Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Lilac Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Lilac features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: Lilac- Quantity: 1 unit Code E0003 Available Price €1.29
Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Fuchsia Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Fuchsia features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: Fuchsia- Quantity: 1 unit Code E0004 Available Price €1.29
Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Pink Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Pink features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: Pink- Quantity: 1 unit Code E0005 Available Price €1.29
Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Green Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Green features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: Green- Quantity: 1 unit Code E0006 Available Price €1.29
Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Yellow Foldable Plastic Stand for Mobile Tablets eBooks Smartphone Yellow features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: Yellow- Quantity: 1 unit Code E0007 Available Price €1.29
Foldable Plastic Stand for Cell Phones eBooks Smartphone Blue Foldable Plastic Stand for Cell Phones eBooks Smartphone Blue features: - The colors of the articles may vary a little from the photographs- It should be used on a flat, level and stable surface- Dimensions: 7.5 × 3.5 cm, height 6cm- Color: Blue- Quantity: 1 unit Code E0008 Available Price €1.29
SparkFun Biomedical sensor pad set 10pcs This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel. This is not a medical device and is to be used for strictly educational purposes. Code SP029 Available Price €12.95
HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.79
Relay Module DC 12V 10A 1 Channel Low/High Trigger Relay Module DC 12V 10A 1 Channel Low/High Trigger features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high) Code RL003 Available Price €2.29
HC-SR501 Motion Detector Module Passive Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º. An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features: - Infrared sensor with control circuit - Adjustable sensitivity and time - Operating voltage: 4.5V- 20V - Consumption in Idle state: Code S0003 Available Price €1.79
10x Tactile Tact Push Button Switch 6x6x8mm 10x Tactile Tact Push Button Switch 6x6x8mm features:- Tactile Push Tact Switch mini electronic Arduino pushbutton- Measures: 6x6x8mm- Quantity: 10 units Code K0076 Available Price €0.15
Waterproof bicycle phone bag The Wozinsky bike bag securely stores your smartphone , giving you constant control of what's on your screen so you can answer calls and listen to music without any hindrance. Code KH006 Last items in stock Price €12.99
Batch of 600 Units 1/4W Resistors Various values Ohm Ω Batch of 600 Units 1/4W Resistors Various values Ohm Ω features: - Each lot contains (30 x 20 units): 10Ω, 22Ω, 47Ω, 100Ω, 150Ω, 200Ω, 220Ω, 270Ω, 330Ω, 470Ω, 510Ω, 680Ω, 1KΩ, 2KΩ, 2.2KΩ, 3.3KΩ, 4.7KΩ, 5.1KΩ, 6.8KΩ, 10KΩ, 20KΩ, 47KΩ, 51KΩ, 68KΩ, 100KΩ , 220KΩ, 300KΩ, 470KΩ, 680KΩ, 1M - Tolerance: ± 5% - Power: 0.25W Code D0070 Available Price €3.95
Bicycle frame phone bag 1.7L The Wozinsky bike frame bag is a great choice for any cyclist. It can be attached in a flash, ensuring easy access to your phone and essentials and has a capacity of 1.7 litres. Code KH007 Available Price €14.99
W1209 12V DC Thermostat Digital Temperature Controller Switch W1209 12V DC Thermostat Digital Temperature Controller Switch features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50 -110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measurement accuracy: 0.1 ° C - Refresh rate: 0.5 s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Power of output: 10A relay - Sensor probe: NTC waterproof sensor (10K 0.5%) - Environmental requirements: -10 ~ 60 ° C Humidity 20% -85% - Dimensions: 48 x 40 mm Code M0102 Available Price €3.79
Vertical Liquid Level Sensor Switch Level sensor for liquids with float. The liquid level sensor acts as a switch. The state is changed by means of a magnet located on the float. It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where it is necessary to control the level of non-corrosive liquids such as water tanks, aquariums. Characteristic: - Maximum Load: 50W - Maximum Switching Voltage: 250V - Maximum Switching Current: 0.5A - Maximum charging current: 1A - Operating temperature: -10ºC to + 60ºC - Size: 58mm x 18mm Code S0043 Available Price €2.95
2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 Available Regular price €11.95 -€2.40 Price €9.55
Cables for Multimeter 2 Cables for 1M Multimeter Meter features: - Voltage 1000V, 10A CAT III- Total length 110cm- Red and black colors Code K0012 Available Price €3.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
10x Female-Female Cables 20cm Jumpers Dupont 2,54 10x Female-Female Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have female header contacts at either end -Compatible with male connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0005 Available Price €1.69
LCD Display Screen Blue Backlight 20x4 2004 It works exactly the same and with the same libraries as an LCD1602.It consists of a display of 20 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 20x4 2004 features:- LCD screen, 20 characters and 4 lines- 5V power- Backlit blue background, white letters Code P0002 Available Price €8.95
Relay Module 1 Channel 5V 10A 1 Channel 5V Relay Module. This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). Relay Module 1 Channel 5V 10A features: - Channel: 1 - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - LED indicator - Dimensions: 30x 54mm Code RL005 Available Price €1.29
Samsung USB Wall Charger USB-C 15W PD AFC black Fast AC charger (EP-T1510NBEGEU). Features a USB Type-C port that allows charging up to 15W. Allows fast charging of devices, including Power Delivery and AFC standards. It is made of fireproof PC material. It has been equipped with many protections, such as overheating, overvoltage, high voltage or overcharging. Code KH016 Available Price €15.99
10x Female-Male Cables 20cm Jumpers Dupont 10x Female-Male Cables 20cm Jumpers Dupont features: -Length: 20cm-Quantity: 10 cables-Connectors have male and female header contacts at either end-Compatible with male and female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0009 Available Price €1.69
LED 1W Red SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã beam angle: 120 degrees - Color emission: red Code P0044 Available Price €0.98
USB to Micro USB On/Off Switch for Arduino Charger Cable It has an ON / OFF switch that will cut off power when you don't need it. USB to Micro USB On/Off Switch Arduino Charger Cable features: - Black color - Length: 150cm - Maximum current 1A Code K0054 Available Price €2.85
LED 1W Orange SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã Beam angle: 120 degrees - Color emission: yellow / orange Code P0045 Available Price €0.98
LED 1W Green SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 70-80LM - Ã beam angle: 120 degrees - Color emission: green Code P0046 Available Price €0.98
LED 1W Blue SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 20-30LM - Ã beam angle: 120 degrees - Color emission: blue Code P0047 Available Price €0.98
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Relay Module DC 5V 10A 2 Channel Low/High Trigger Relay Module DC 5V 10A 2 Channel Low/High Trigger features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- It has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL002 Available Price €3.15
5x Pushbutton B3F Green Key Omron Electronica for Arduino Prototype Switch 12 5x Pushbutton B3F Green Key Omron Electronica Arduino Prototype Switch 12 features:- 5x Pushbuttons B3F Omron- 5x Keys- Maximum current: 50mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals - Weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0075 Available Price €0.20