Limit Switch with Wheel - 5A 250 Vac - 1 switched - Arduino compatible

LED Diode Assortment Kit 15 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*5x red
*5x green
*5x yellow

USB Cable for Arduino Type A-B features:
- Length: 50cm
- Color: Blue

Flat Cable 1m AWG28 1.27 Gray 10 Pins features:
- Length: 100cm
- Model AWG28
- Product name: Flat cable
- Number of conductors: 10
- Conductive material: Copper
- Insulation voltage: 300V
- Inner diameter 0.32mm
- Pin Pitch: 1.27mm
- Temperature: 105 ° C

Ceramic Capacitor 100nF (0,1uF) 50v 104 PCB PIC Arduino features:

Orders only in multiples of 20 units
-Type: Ceramic Y5V
-Tolerance: +80/-20%
-Dimensions: diameter 9.5mm, pitch 5.08mm

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

- Bootloader Pin Header Compatible 100% ARDUINO
- Pro Mini Atmega328P 5v 16Mhz
- Miniaturized compatible version of Arduino Pro Mini
- It has an Atmega328P chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can only solder the pins that we need
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Auto-reset - micro switch
- Integrated 5V regulator
- FLASH 32kB memory
- SRAM 1kB memory
- EEPROM 1Kb memory
- Analog input A0-A7
- 8 PWM channels
- External interruption
- TWI / I2C, UART, SPI interfaces
- Power and status LEDs
- Dimensions: 18x33mm
- Weight: 30 grams
Useful links for Arduino />

Arduino compatible IR motion detector with a detection range of 3 meters.
One sensor electric pyro, which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32.
Characteristic:
- Operating voltage: 4.5V- 20V
- Consumption in idle state:

LED Display 2-Digit 7-Segment Red Common Cathode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 2
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C
- Storage temperature: -30°C - + 85°C
- Screen with common cathode connection
- Screen size: 25x19x8 mm
- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:.