12V Momentary LED Pushbutton Blue 16mm N/A NO

Pulley GT2 20 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 18mm
- Inner hole: 5mm
- Use with strap: 6mm and 6.35mm
- Ideal to fix on the axis of the motors of your 3D printer

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features:
- Type: 3P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"

Crocodile Clip 30A 2x75mm Black + Red features:
- Length: 75mm
- Handle length: 38mm
- Isolated
- Quantity: 2 units

- Measurements:
* Inner diameter D: 5mm
* Outside diameter D: 14mm
* Width - dimension B: 5mm
* Dimension C1: 1mm
* Dimension D1: 16mm
- Quantity: 1 unit

Isopropyl alcohol is used for cleaning: - of electronic devices such as contact tips (such as those of ROM cartridges)
- tapes magnetic and disk heads (such as those for audio and video recorders and floppy drives)
- laser lenses on optical disc drives (eg CD, DVD) and removal of thermal paste of heat sinks and integrated circuit packages (for example: CPU)
-of the keyboard and LCD screen
-Usefully used to clean photographic lens lenses and contacts of electronic devices as it leaves no marks and is quick to evaporate.

Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º.
An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features:
- Infrared sensor with control circuit
- Adjustable sensitivity and time
- Operating voltage: 4.5V- 20V
- Consumption in Idle state:

9 way mounting solder sub-D male connector.
9-pin male sub-D connector for soldering in copper alloy features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 9
- The connectors are supplied with stamped and formed contacts
- Straight male connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features:
- Based on the PCF8574A chip
- Power: 5V
- Supports I2C Protocol
- A potentiometer for regulate contrast
- Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL
- Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32