Tools

Thermo Silicone Paste Cleaner features:
This product is safe and easy to use with a pleasant aroma of citrus.
It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned
- Wait 1-2 minutes
- Clean with a cloth

Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.
It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features:
- Excellent dielectric properties
- It is used in different industrial processes as a lubricant (due to its greasy consistency)
- Particularly suitable for lubricating plastic and rubber parts
- Ideal as an insulating coating that does not harden
- High quality - Made in EU

Soldering Station 48W features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 480 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).
- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales.

Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)
- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)
-the keyboard and the LCD screen

Graphite Grease Spray Anticorrosive 100ml features:
Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: - Car leaf springs
- Worm gear
- Change gear train
- Screw thread
- Screwbolt which are exposed to corrosion
- Chains and other hardly burden nodes of friction working in a temperature range from -20°C to 50°C

Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.
It is necessary for the correct operation of any type of temperature sensors.

Soldering Iron Tin 60W Dual Watt 30W Replaceable Tip features:
- Power: 30W/60W
- Power: 220V-240V
- Equipped with B3 tip
- Long duration tip
- Certifications CE, RoHS
- Blister packaging
- Quantity: 1 unit

Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K

Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips features:
- Pyrography type pencil, with 6 replacement tips with different shapes and thicknesses. Ideal for carpentry and joinery
- Can be used on different materials, the most common are wood, leather and rubber, but can also be used with other materials
- Number of nozzles: 6 units
- Power: 30W
- Voltage: 220-240V
- Caution: do not touch the tip of the pyrograph while it is hot. Change the mouthpiece with tweezers or wait for it to cool
- Certifications CE, RoHS, LVD

Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls)

Soldering Iron 40W features:
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TUV certifications

TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 26x26x0,3mm

Hot Air Digital Soldering Station ZD-8907 SMD features:
- For welding and desoldering SMD components
- Power: 220V-240V
- Temperature regulation 200°C - 500°C
- Power consumption 320 W (max.)
- Air Flow 22 l/min. (Max.)
- Nozzle diameter 21.5 mm
- Dimensions 58 × 290 mm
- Certifications CE, RoHS, LVD
- Guarantee 12 months

Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 41.5x28.2x0.3mm

Power supply: 220V-240V Temperature regulation 160 ° C -480 ° C Power consumption 320 W (max.) Flow of Air 24 l / min. (Max.) Dimensions 160x 225x 138mm CE, RoHS, LVD Certifications 12-month warranty

Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass.
- Dimensions: 23x18x0,3mm

Soldering Gun with Dual Color 30W/70W features:
- Power: 30W, maximum 70W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TÃœV certifications Instructions: When connected, the initial power runs at 30W.
When you press the button, the energy runs around 70W.
When you release the button, the power will slowly descend to 30W again.

Soldering Station 48W + Soldering Set features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 450 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 011 features:
- Mixing ratio: 100: 8,
- Density: 0.97g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.

ESD compatible gloves made of polyester with woven conductive fibres.

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 019 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100:6,
- Density: 1.2g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 45000 cP,

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 021 features:
- Manufacturer: TermoPasty,
Mixing ratio: 100: 10,
Thermal conductivity: 1.2 W / mK,
Density: 1.12g / cm3,
Pre-crosslinking: 30-40 min,
Working temperature from -50ºC to + 200ºC,

60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:
- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.
- Fusing temperature 183°C/190°C.
- Alloy: Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.
The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.
After curing, it is very soft.
Creates an excellent electrical insulation.
It has a wide range of temperatures, from -55 ° C to 200 ° C.
Silicone compound 031 Double-component gel features:
- Mixing ratio: 3: 2,
- Density: 0.98g / cm3,
- Pre-crosslinking: 50-60 min,
- Working temperature from -50ºC to + 180ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.
Mode of use:
- Clean, degrease and dry the system.

ZD-8906 Digital Soldering Station 30W features:
- For general electronics and repairs
- High potency ceramic resistance that provides a fast recovery of temperature
- Soldering iron holder
- Heating element for soldering iron: 30W
- Resistance: Ceramic
- Temperature: 160 °C - 550 °C
- Power: 220-240Vac
- Certifications CE, RoHS, LVD

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 029 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100: 10,
- Thermal conductivity: 2 W / mK,
- Density: 1.15g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK.

Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.
A special brush facilitates the application of the paste.
Diamond powder content: 10%
AG Extreme thermal grease 4g flask features:
- Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,
- Thermal impedance: <0.065 ° C in2 / W
- Specific gravity:> 2.4g / cm3,
- Evaporation: <0.001%,
- Fluency: <0.001%,
- Electrical conductivity: insulation,
- Viscosity: 1000 cP,
- Working temperature from -40ºC to + 300ºC,
- Supported temperatures: -40ºC to + 350ºC,
- Gray.
Mode of use:
- Store in a well ventilated, cool and dry place.

Tin ideal for application in consumer electronics circuits
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm features:
- 100gr. 0,5mm diameter welding wire. 60% tin and 40% lead
- Melting temperature 183 o C / 190 o C
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK.

60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g features:
- 50gr. 1mm diameter welding wire. 60% tin and 40% lead.
- Fusing temperature 183°C/190°C.
- Alloy: Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.
Thermal conductivity:> 2.8 W / mK,

Tin ideal for application in consumer electronics circuits.
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm features:
- 100gr. 1.2mm diameter welding wire
- 60% tin and 40% lead
- Fusing temperature 183 „ƒ / 190 „ƒ
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. The application method guarantees simplicity of use, and the product can be easily applied to various computer accessories and LEDs. Ideal as a heat transmitter from the heat pipe condenser to the heat exchanger in a vacuum solar collector. Thermal conductivity: 6 W / mK.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1mm 1.0 features:
- Material: Copper
- Length: 1.5m
- Width: 1.0mm
- Desoldering Braid Solder Remover Wick 1mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

Anti-Adhesive No-Fat Dry Spray Based on PTFE. Dry, no-fat, anti-adhesive agent based on pure PTFE. Perfect greasing solution for surfaces that must be slippery, especially when it is required to protect them against contamination present in the environment. Very low friction factor.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 1.5mm
- Desoldering Braid Solder Remover Wick 1.5mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.
Application: Installation of boilers, furnaces, motors, heating systems, water pumps.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2mm features:
- Material: Copper
- Length: 1.5m
- Width: 2mm

The grease reduces the friction of the metal parts to a minimum. Provides lasting protection against rinsing and abrasion.
Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis.

The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.
It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.
Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 2.5mm

Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 3mm features:
- Material: Copper
- Length: 1.5m
- Width: 3mm

Liquid Flux for Alcohol-Based Rosin Welding 15ml features:
- Flux liquid alcohol-based for electronic welding
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- Capacity: 15ml
- Content of solid bodies 0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 0.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 0.5mm

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

Tin ideal for application in consumer electronics circuits
Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:
- 10 gr. welding wire of 1 mm diameter. 60% tin, 40% lead
- Melting temperature 187/190 C
- Alloy Sn60Pb40
- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required.  - Quantity: 1 unit
- High quality - manufactured in EU

Tin ideal for application in consumer electronics circuits
Tin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm features:
- 10 gr. welding wire of 1 mm diameter. 99,3% tin, 0,5-0,9% copper and 0,07% lead
- Melting temperature 227 C
- Alloy Sn99Cu1
- Flux 3% Roma IPC-J-STD-004B, SW32 DIN8511  - RohS2 compliant  - Quantity: 1 unit
- High quality - manufactured in EU

The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features:
- The breaking voltage is ~ 30kV / mm.
- Preserves rubber, plastic
- A wide range of operating temperatures: -50 ° C to 200 ° C
- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (like those of ROM cartridges)
- Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)
- Laser lenses in optical disk drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and LCD screen Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for slates.

Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.
It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces Silicone Oil 100ml to Lubricate features:
- Excellent dielectric properties
- It is used in different industrial processes as a lubricant (due to its greasy consistency)
- Particularly suitable for lubricating plastic and rubber parts
- Ideal as an insulating coating that does not harden
- High quality - manufactured in EU

Soldering Iron Cleaner with Brass Ball Holder features:
- Brass wire cleaner for solder tips with support
- It allows to remove the welding residues from the tips
- Cleans better and does not cause temperature drops as with sponges
- You do not need extra water to clean the tip
- Easy and effective cleaning at the tip
- Dimensions: diameter 50mm
- Support dimensions: 60x68mm

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm

3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80 mm
- Length 70 mm
- Long duration tip

Spray Contact Cleaner 300ml features:
A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections
- Has cleaning properties
- Used in audio technologies
- Protection against moisture and corrosion
- Prevents stray current

Long Life Replacement Tip Welder B11 Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80mm
- Length 70 mm
- Long duration tip
- Quantity: 1 unit

Long Life Replacement Tip Welder B12 Ø 3.8mm 40W features:
  - Power: 40W
- Rod: ø 3.80mm
- Length: 70 mm
- Long duration tip
- Quantity: 1 unit

Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:
It facilitates the transfer of heat between the electronic components and the radiator.
It's necessary for the correct operation of any type of temperature sensors.
Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.
-Density at 20°C: 2.58 G/cm3
-Points: 350°C
-Freezing point: -50°C
-Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K
-Constant dielectric at 100 Hz: 4.7 (± 0.1)
-Cross resistance: 5x10 to power 14 Ohm x cm