Two-component silicone encapsulating compound 011

Flux rosin, solid resin, neutral pH for correct electronic soldering
- They do not cause corrosion of non-ferrous metals
- Does not cause short circuits
Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs.
Use a toothpick for the application. Do not apply excessively.
Safety:
- Use in ventilated spaces. Do not inhale the fumes that are given off by welding.
- Keep the bottle tightly closed and out of the reach of children.
- Do not ingest. Non-toxic
- Rarely irritating to skin contact

A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - manufactured in EU

Spray Contact Cleaner 300ml features:
A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections
- Has cleaning properties
- Used in audio technologies
- Protection against moisture and corrosion
- Prevents stray current

The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.
The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.
After curing, it is very soft.
Creates an excellent electrical insulation.
It has a wide range of temperatures, from -55 ° C to 200 ° C.
Silicone compound 031 Double-component gel features:
- Mixing ratio: 3: 2,
- Density: 0.98g / cm3,
- Pre-crosslinking: 50-60 min,
- Working temperature from -50ºC to + 180ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.
Mode of use:
- Clean, degrease and dry the system.

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).
- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales.

Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)
- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)
-the keyboard and the LCD screen

Use the right tool for every need.
It is a special electrostatic brush for cleaning electronic components or places where the electrostatic charge must be taken into account. Electrostatic Brush ZD-155D 160 mm features:
- Model: ZD-155D
- Brush length: 160 mm
- Hair length: 25 mm
- Number of hair groups: 6

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features:
A protective film, transparent.
Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.
Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.
PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.
-Temperature of application: -40°C + 60°C.
-Operating temperature: -50°C + 150°C.