Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
2x IDC 10 female connector for flat cable AWG 1.27 2x IDC 10 female connector for flat cable AWG 1.27 features: - Number of pins: 10 - Pin Pitch: 2.54mm - Flat Cable Pin Pitch: 1.27mm - Quantity: 2 units Code K0001 Available Price €0.59
SparkFun IoT RedBoard - ESP32 Development Board SparkFun IoT RedBoard development board compatible with Arduino. It incorporates an ESP32 chip with a 32-bit dual-core Xtensa LX6 microprocessor with a clock frequency of up to 240 MHz. It enables WiFi and Bluetooth wireless communication, making it versatile for Smart Home and IoT projects. Code SP048 Available Price €45.49
40x Female-Female Cable 10cm 40x Female-Female Cable 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont female connectors on both ends - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K1005 Available Price €1.99
Gravity: Analog pH Sensor/Meter Kit DFRobot Gravity (SEN0161): The analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF024 Last items in stock Price €45.90
Lot of 100unds White Nylon Clamps Lot of 100unds White Nylon Clamps features: - Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units Code K0259 Available Price €1.79
Sensor Module Moisture Earth Water Soil The module has two outputs: analog A0 and digital D0 Digital output D0 - signal 0 appears or 1 depending on the threshold setting The threshold is set with the potentiometer The sensor can be used for example: Automatic watering for potted plants With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants Characteristic: Operation: 3.3V -5V - Sensitivity adjustable by potentiometer - Dual output mode: analog and digital - Red LED - power indicator - Green LED - indicator digital switching output - PCB measurements: 3 x 1.5 cm - Probe measurements: 6 x 3 cm Code S0021 Available Price €1.95
Resistor 4,7M Ohm 5% 0,25W 1/4W Resistor 4,7M Ohm 5% 0,25W 1/4W features:-4.7M Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0033 Available Price €0.08
Shelly 1 Shelly 1 is a universal smarthome relay enabled to work with all the key smart home systems, including Google Home and Amazon Alexa, as well as an original Shelly solution Shelly Cloud Code WH001 Available Regular price €15.95 -€1.50 Price €14.45
Alligator clip connectors Red + Black pack 2unds Alligator clip connectors Red and Black. Code K0255 Available Price €0.59
Adapter Battery 9V 6F22 Jack Connector DC Ideal to power your Arduino board through the power input.Adapter Battery 9V 6F22 Jack Connector DC features:- Cable 7cm long- Battery connector 9V, 6F22- Male connector DC 5.5 / 2.5 Code PP011 Available Price €0.75
Resistor 10M Ohm 5% 0,25W 1/4W Resistor 10M Ohm 5% 0,25W 1/4W features:-10M Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0034 Available Price €0.08
40x Male to male cables 10cm 40x Male to male cables 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont male connectors on both ends - Compatible with 2.54mm female connectors - High quality and good working condition - Easy to install and use Code K0107 Last items in stock Price €1.99
3.5mm Mini Jack Chassis Panel Mount Earphones Stereo Front Connector 3.5mm Mini Jack Chassis Panel Mount Earphones Stereo Front Connector features: - Quantity: 1 unit- 3.5mm jacks for mounting on flat surfaces- 3-pole connectors suitable for use with headphones and other stereo audio equipment- Termination method: welding- Color: gold / black Code K0082 Available Price €1.39
40x Female Male 10cm 40x Female Male 10cm features: - Length: 10cm - Quantity: 40 cables - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K0106 Available Price €1.99
NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz features: - The NRF24L01 + module is powered with 3.3V- This adapter module includes a 3.3V voltage regulator- You can connect the NRF24L01 module on it at 5V voltage- Dimensions of PCB: 25x 18mm- Quantity: Adapter 1 unit Code W0023 Available Price €1.49
Red Laser Line Module Generator 650nm 10mW Red Laser Line Module Generator 650nm 10mW features:- Module Focus Adjustable Laser Head 3V- Type: Red laser diode- Type of laser: Line- Adjustable Focus- Wavelength: 650nm- Output power: 10mW- Operating voltage: 3V-4V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0049 ✗ Out-of-Stock Price €6.78
Resistor 1M Ohm 5% 0,25W 1/4W Resistor 1M Ohm 5% 0,25W 1/4W features:-1M Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0031 Available Price €0.08
Support for HC-SR04 Ultrasonic Sensor Support for ultrasounds, HC-SR04 distance meter. Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features: - Material: Acrylic - Color: transparent - Includes screws Code S0005 Available Regular price €1.45 -€0.50 Price €0.95
Serial Enabled 16x2 LCD - White on Black 5V It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328. Code SP035 Last items in stock Regular price €36.99 -€10.00 Price €26.99
Resistor 2M Ohm 5% 0,25W 1/4W Resistor 2M Ohm 5% 0,25W 1/4W features:-2M Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0032 Available Price €0.08
Sonoff DUALR3 - Wireless Smart Switch SONOFF DUALR3 is a WiFi based 2-gang switch that can independently connect and control two connected devices or lights - this simply means that 1 SONOFF DUALR3 control switch is equivalent to 2 Sonoff basic switches! The three working modes of DualR3 are switch mode, motor mode and meter mode. Code WS043 Available Price €16.99
Resistor 220K Ohm 5% 0,25W 1/4W Resistor 220K Ohm 5% 0,25W 1/4W features:-220 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0027 Available Price €0.08
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Available Price €4.79
Transparent Box for W1209 DIY Transparent Box for W1209 DIY features: For W1209 Thermostat DC 12V temperature controller Code M0107 Available Price €2.65
74HC595 SN74HC595N 8-Bit DIP-16 With this multiplexer circuit we will be able to get 8 more digital outputs for arduino losing only 3 of them. Code T0020 Available Price €0.49
Resistor 47K Ohm 5% 0,25W 1/4W Resistors 47K Ohm 5% 0,25W 1/4W features:-47K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0023 Available Price €0.08
Smart Garden Irrigation Control ZigBee 3.0 TUYA Zigbee 3.0 irrigation controller for garden. The latest generation ZigBee 3.0 protocol, together with the Tuya Smart app, allows you to create a real smart home. Once you have set the correct schedules for each day of the week, you can forget about remembering to water your garden every day. Code WT013 Backorder Price €43.90
2x Cable Alligator Clip Black and Red Multimeter 2x Cable Alligator Clip Black and Red Multimeter features: - Length: 90cm- Colors: red and black- Quantity: 2 Cables Code K0016 Available Price €2.99
Resistor 100K Ohm 5% 0,25W 1/4W Resistor 100K Ohm 5% 0,25W 1/4W features: 100K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0026 Available Price €0.08
10x Linear Potentiometer 100k OHM kΩ 10x Linear Potentiometer 100k OHM kΩ features:- 100k Ohm kΩ Linear- Horizontal variable resistance PCB- Quantity: 10 units Code K0063 Available Price €0.12
HC-SR04 + Ultrasonic Sensor Support for Arduino compatible sensors It is very easy to make it work with an Arduino, PIC or any other microcontroller.In its output pin we can measure the pulse width PWM depending on the distance of the obstacle.Mounting bracket is ideal for installing the sensor on mobile platforms such as robots, vehicles, etc. HC-SR04 + Ultrasonic Sensor Support Arduino features: - Supply voltage: 5V (4.5V-6V)- Consumption: typical 30 mA, (35 mA max)- Interface: VCC, GND, Signal- Range: 2 cm to 3 meters- Angle 15º- LED measurement indicator in progress- Frequency: 40 kHz for 200 μs- Size: 30 mm x 20 mm Feature of the support: - Material: Acrylic- Transparent color- Includes screws Code S0006 Available Regular price €3.24 -€0.60 Price €2.64
Wemos D1 Mini Pro-16 Module + Esp8266 Wifi Series Wireless Antenna A Mini WIFI board ESP8266 contains 16MB flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. Wemos D1 Mini Pro-16 Module + Esp8266 Wifi Series Wireless Antenna features: - Compatible with Arduino, programming with the Arduino IDE, MicroPython, NodeMCU - Supply voltage: 5V - Logical levels: 3.3V - 16MB (128Mbit) flash - 11 pins of input / output - I2C / one-wire interface, LOLIN I2C port - 1 ADC (input: 0-3.2V) - built-in ceramic antenna - external antenna connector - Power switch - Includes external WIFI antenna with IPEX SMA adapter Wemos D1 Mini Pro-16 Module + Esp8266 Wifi Series Wireless Antenna features: of esp8266: - Supported protocols: 802.11 b / g / n - Network support: 2 , 4 GHz Code W0098 Available Price €10.90
Resistor 10 ohm 5% 0,25W 1/4W carbon film resistor Resistencias (10 Ohm) de tolerancia de 0.05 y potencia de 0,25W. En el carbon film. Code D0002 Available Price €0.08
Resistor 22 Ohm 5% 0,25W 1/4W Resistors 22 Ohm 5% 0,25W 1/4W features:-22 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0003 Available Price €0.08
SparkFun ESP8266 Thing - Dev Board (wo headers) ESP8266 Thing Dev board from Sparkfun is a reliable, strong solution for IoT projects. The ESP8266 is a well-known WiFi controller from the boards such as NodeMcu and or WeMos. This board increases the reliability to maximum though. This version comes without headers. Code SP007 Last items in stock Price €25.99
Resistor 510 ohm 5% 0,25W 1/4W carbon film resistor Resistencias (510 Ohm) de tolerancia de 0.05 y potencia de 0,25W. En el carbon film. Code D0011 Available Price €0.08
Resistor 5,1K Ohm 5% 0,25W 1/4W Resistor 5,1K Ohm 5% 0,25W 1/4W features:-5.1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0018 Available Price €0.08
SONOFF ZBMINI-L ZigBee 3.0 Smart Switch - No neutral wire required Sonoff ZBMINI-L is a universal switch controlled by ZigBee. It works with 240V voltage and enables control of any device anywhere in the world, controlling it by your mobile phone or voice assistants such as Alexa. Thanks to its small size it fits in most power supplies. No neutral wire required. Code WS047 Available Price €15.99
Plastic Housing DB9 DB15 Cover Connector RS232 D-SUB Plastic Housing DB9 DB15 Cover Connector RS232 D-SUB features: - Plastic housing for DB9 DB15 connector Code K0084 Available Price €0.98
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP038 Last items in stock Price €34.99
Cable 1x1.5 Flexible Single-pole 1.5mm black 1m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x1.50mm2 -Service voltage: 450 / 750V -Service temperature: at 70ºC -Resistance at 20ºC: 13.3 Ohm / Km -Weight (Kg / Km): 21 -External diameter: 3.4mm -Length 1m Code K0041 Available Price €1.08
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
Cable 1x1.5 Flexible Single-pole 1.5mm green-yellow 1m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x1.50mm2 -Service voltage: 450 / 750V -Service temperature: at 70ºC -Resistance at 20ºC: 13.3 Ohm / Km -Weight (Kg / Km): 21 -External diameter: 3.4mm -Length 1m Code K0043 Available Price €1.08
Slide Linear Potentiometer 10K OHM kΩ Slide Linear Potentiometer 10K OHM kΩ features: - Ideal for application in electronic circuits, MCU. ARM and Arduino projects- Value: 10k Ohm- Type: Linear variable resistance- Tolerance: 20%- Power: 250mW (1 / 4W)- Dimensions 90x20 mm- Analog voltage signal 0 - VCC- Double outlet OTA, OTB- Quantity: 1 unit Code M0054 Available Price €2.89
10x Linear 5K Potentiometer OHM kΩ Linear 5K Ohm Potentiometer features:- Horizontal variable resistance PCB- 5K Linear Code K0064 Available Price €0.20
Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm -Length 1m Code K0035 Backorder Price €0.45
Cable 1x0.35 Flexible single-pole 0.35mm red 3m Characteristic: -Low-voltage electric cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm Code K0033 Backorder Price €0.45
SONOFF POW Elite Smart Power Meter Switch - POWR316 SONOFF POW Elite 16A is a power meter switch with a newly upgraded ESP32 chip that is 200% faster than the previous ESP8622 chip. Version without lcd display, you can track the real-time power, current and voltage of your appliances and the accumulated power consumption. Code WS063 Available Price €24.49
30x 1N4007 Rectifier Diodes 1A 1000V DO-41 1N4007 Rectifier Diodes 1A 1000V DO-41 features:- Standard rectifier diode- Configuration: Simple- Reverse voltage: 1000V- Direct voltage drop: 1V- Direct direct current: 1A- Maximum overvoltage current: 30A- Encapsulated: DO-41- Operational tension: -65ºC to + 125ºC- Quantity: 30 units Code T0002 Available Price €0.05
FinestraMiner Helium LoRaWAN Gateway Hotspot Miner FinestraMiner is a highly efficient Helium compatible hotspot that provides wireless network coverage to the Helium network, also called People's Network, the world's largest and fastest growing LoRaWAN network. It allows thousands of IoT devices to connect to this single hotspot using Long-Fi technology, with long-range coverage up to 16 kilometres away. The Helium network is a decentralised wireless network that allows devices anywhere in the world to connect to the Internet wirelessly. Code W0800 Available Price €675.00
NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features: - Standard: NFC Forum Type2 Tag Ntag215 - Protocol: ISO14443A - Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ - Reading distance: 0-10CM - Communication speed: 106Kboud - Working temperature: -20ºC to 70ºC - Number of uses 100,000 times - Data retention: 10 years - Material: PVC - Dimensions 86 x 54 x 0.84 mm Code M0052 Available Price €1.99
Light Sensor Module BH1750 FVI Arduino and Raspberry compatible Descripción: Light sensor module to measure light intensity and obtain digital data from it.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32.BH1750FVI (Rohm) is used to adjust backlighting of LCD screens and keyboards by manufacturers of mobile phones, digital cameras, navigation and portable gaming devices. Light Sensor Module BH1750 FVI Arduino Raspberry features: - Chip BH1750FVI- Supply voltage 3V-5V- Integrated 16bit AD converter- Detection range: 0-65535 lx (with an accuracy of 1 lux)- Interface: II2C- Low dependence on the light source (eg incandescent lamp, fluorescent lamp, halogen lamp, white LED, sunlight)- Dimensions 18.4 x 14 mm Code M0019 Available Price €2.99
Cable 1x0.35 Flexible single-pole 0.35mm black 1m Cable 1x0.35 Flexible single-pole 0.35mm² black features: -Conductor: Flexible Copper -Insulation: PVC -Low voltage electrical cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm² -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer Diameter: 2.4mm Code K0031 Backorder Price €0.45
Photoresistor GL5516 LDR 10x Photoresistor 5mm GL5516 LDR 5-10k for Arduino.Photoresistor is a resistor whose resistance decreases when increasing the intensity of the light that falls on it. 10x Photoresistor GL5516 LDR features: - Model: GL5516- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 90mW.- Resistance with light (10lux): 5-10KΩ- Resistance with darkness (0lux): 0.5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0012 Available Price €0.15
ADXL345 3-Axis Accelerometer SPI and I2C Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32.It serves to measure the static acceleration, for example gravity, in applications where you need to measure the inclination.Also to measure dynamic acceleration, movement. ADXL345 3-Axis Accelerometer SPI and I2C features: - Type: 3-axis accelerometer- Chip: ADXL345- Supply voltage: 3-5V- Consumption: 40uA active and 0.1uA on hold- Communication: SPI and I2C- Measurements: Static and dynamic acceleration- Accelerometer scales ± 2g, ± 4g, ± 8g and ± 16g- Resolution: 13 bits- Dimensions: 20x16mm- Operating temperature: -40 °C to +80 °C- Detection: Free fall, click-double click Code M0018 Available Price €3.09
ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features: - Chip ENC28J60 Microchip- Module: 10Base-T- 3.3V power- SPI interface- 25Mhz speed- LED status LED- Hanrun network transformer- Network Interface board HR911105A- Operating temperature: -40ºC to + 85ºC- Dimensions: 51 x 19 x 16 mm Code W0006 Available Price €9.90
10x Photoresistor GL5539 LDR 50k - 100k Photoresistance is a resistor whose resistance decreases as the intensity of the light that falls on it increases. 10x Photoresistor GL5539 LDR 50k - 100k features:- Model: GL5539- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 100mW- Resistance with light (10lux): 50-100KΩ- Resistance with darkness (0lux): 5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0013 Available Price €0.15
2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino 2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL004 Available Regular price €3.15 -€0.50 Price €2.65
SONOFF ZBMINIL2 ZigBee 3.0 Smart Switch - No neutral wire required Sonoff ZBMINI-L2 is the latest version of universal switch controlled by ZigBee. It works with 240V voltage and enables control of any device anywhere in the world, controlling it by your mobile phone or voice assistants such as Alexa. Thanks to its small size it fits in most power supplies. No neutral wire required. Code WS083 ✗ Out-of-Stock Price €15.99