Momentary Switch Push Button Red N/O 7mm Momentary Switch Push Button Red N/O 7mm features: - Momentary pushbutton N/O (normally open)- Red button- Dimensions approx. 7 mm x 27 mm- Recessed with nut and washer- Load current (supported): 1A to 230V / 2A to 125V- Drill to embed: 7 mm +/- 0.2- Operating temperature: -55º to +85ºC Code K0156 Available Price €0.37
Voltmeter Ammeter 100V 50A Digital DC Red Blue Voltmeter Ammeter 100V 50A Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Useful links for Arduino /> Code M0073 Available Price €5.69
Flat Cable 1m AWG28 1.27 Gray 10 Pins Flat Cable 1m AWG28 1.27 Gray 10 Pins features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0002 Available Price €2.03
Sensor Module GUVA-S12SD UV Sensor Module GUVA-S12SD UV features: - The module based on the Schottky-type photodiode - applicable to the optical mode - This is a " true "UV sensor instead of calibrated light sensor - It has high sensitivity, high stability, good linearity - Power supply: 2.5V - 5V - Analog output - Captured wavelength: 240-370nm - Ultra low power consumption - Meteorological applications, skin care, industrial UV level measurement - PCB dimensions: 11x27mm Code S0041 Available Price €6.60
Female Strip 40 Short Pins Female Strip 40 Short Pins features: - Pin spacing: 2.54mm - Insert position: Vertical - Insert: Pasante - Quantity: 1 unit of strips of 40 female pins each Code K0139 Available Price €0.57
Power Supply Transformer 220V AC/DC 2A 9V Power Supply Transformer 220V AC/DC 2A 9V features:- Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 9V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0098 Available Price €3.30
9-pin male sub-D connector for soldering in copper alloy 9 way mounting solder sub-D male connector. 9-pin male sub-D connector for soldering in copper alloy features: - Nominal voltage: 500 VAC - Nominal current: 5 A - Number of ways: 9 - The connectors are supplied with stamped and formed contacts - Straight male connector - Tin-plated and notched housings offering good grounding and continuity - Tin-plated solder barrel terminations - Good EMI / RFI protection - Insulating material: fiberglass polyester Code K0196 Available Price €0.57
Isopropyl Alcohol IPA Plus 500mL Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)-the keyboard and the LCD screen Code Q0036 ✗ Out-of-Stock Price €4.54
9-pin female sub-D connector for soldering 9-way mounting solder sub-D female connector. 9-pin female sub-D connector for soldering features: - Nominal voltage: 500 VAC - Nominal current: 5 A - Number of ways: 9 - The connectors are Supplied with stamped and formed contacts - Straight female connector - Tin-plated and notched housings offering good grounding and continuity - Tin-plated solder barrel terminations - Good EMI / RFI protection - Insulating material: fiberglass polyester Code K0195 Available Price €0.57
25-pin male sub-D connector for soldering in copper alloy 25 way mounting solder sub-D male connector. 25-pin male sub-D connector for soldering in copper alloy features: - Nominal voltage: 500 VAC - Nominal current: 5 A - Number of ways: 25 - The connectors are supplied with stamped and formed contacts - Straight male connector - Tin-plated and notched housings offering good grounding and continuity - Tin-plated solder barrel terminations - Good EMI / RFI protection - Insulating material: fiberglass polyester Code K0198 Available Price €0.57
Blue 15-pin standard THT male connector 9.4mm with 90° angle thread Standard 9.4mm THT blue 15-pin Sub-D male connector for soldering in 90 ° spatial orientation with threads on the the male connector with screws is connected. Blue 15-pin standard THT male connector 9.4mm with 90° angle thread features: - Color: blue - Connector male - Number of pins: 15 - Connector type: D-Sub HD - Connection version: 9.4 mm - Interlocking system: screws - Spatial orientation: 90 ° angled - Electrical mounting: THT - Thread: UNC4-40 - Contactor material: brass - Contactor coverage: gold - Insulation material: polyamide - Working temperature: -55 ° C - + 105 ° C Code K0199 Available Price €0.57
Sub-D connector 26-pin female THT with 90° angle thread Sub-D female connector 26 pins THT for soldering with a 90 ° spatial orientation with threads as far as the male connector with screws connects. Sub-D connector 26-pin female THT with 90° angle thread features: - Female connector - Number of pins: 26 - Connector type: D-Sub HD - Interlocking system: screws - Spatial orientation: 90 ° angular - Electrical mounting: THT - Thread: UNC4-40 - Contactor material: brass - Contactor coverage: gold - Insulation material: polyamide Code K0197 Available Price €0.57
9-pin male sub-D connector for soldering in copper alloy 9 way mounting solder sub-D male connector. 9-pin male sub-D connector for soldering in copper alloy features: - Nominal voltage: 500 VAC - Nominal current: 5 A - Number of ways: 9 - The connectors are supplied with stamped and formed contacts - Straight male connector - Tin-plated and notched housings offering good grounding and continuity - Tin-plated solder barrel terminations - Good EMI / RFI protection - Insulating material: fiberglass polyester Code K0196 Available Price €0.57
9-pin female sub-D connector for soldering 9-way mounting solder sub-D female connector. 9-pin female sub-D connector for soldering features: - Nominal voltage: 500 VAC - Nominal current: 5 A - Number of ways: 9 - The connectors are Supplied with stamped and formed contacts - Straight female connector - Tin-plated and notched housings offering good grounding and continuity - Tin-plated solder barrel terminations - Good EMI / RFI protection - Insulating material: fiberglass polyester Code K0195 Available Price €0.57
25-pin male sub-D connector for soldering in copper alloy 25 way mounting solder sub-D male connector. 25-pin male sub-D connector for soldering in copper alloy features: - Nominal voltage: 500 VAC - Nominal current: 5 A - Number of ways: 25 - The connectors are supplied with stamped and formed contacts - Straight male connector - Tin-plated and notched housings offering good grounding and continuity - Tin-plated solder barrel terminations - Good EMI / RFI protection - Insulating material: fiberglass polyester Code K0198 Available Price €0.57
Blue 15-pin standard THT male connector 9.4mm with 90° angle thread Standard 9.4mm THT blue 15-pin Sub-D male connector for soldering in 90 ° spatial orientation with threads on the the male connector with screws is connected. Blue 15-pin standard THT male connector 9.4mm with 90° angle thread features: - Color: blue - Connector male - Number of pins: 15 - Connector type: D-Sub HD - Connection version: 9.4 mm - Interlocking system: screws - Spatial orientation: 90 ° angled - Electrical mounting: THT - Thread: UNC4-40 - Contactor material: brass - Contactor coverage: gold - Insulation material: polyamide - Working temperature: -55 ° C - + 105 ° C Code K0199 Available Price €0.57
Sub-D connector 26-pin female THT with 90° angle thread Sub-D female connector 26 pins THT for soldering with a 90 ° spatial orientation with threads as far as the male connector with screws connects. Sub-D connector 26-pin female THT with 90° angle thread features: - Female connector - Number of pins: 26 - Connector type: D-Sub HD - Interlocking system: screws - Spatial orientation: 90 ° angular - Electrical mounting: THT - Thread: UNC4-40 - Contactor material: brass - Contactor coverage: gold - Insulation material: polyamide Code K0197 Available Price €0.57
9-pin male sub-D connector for soldering in copper alloy 9 way mounting solder sub-D male connector. 9-pin male sub-D connector for soldering in copper alloy features: - Nominal voltage: 500 VAC - Nominal current: 5 A - Number of ways: 9 - The connectors are supplied with stamped and formed contacts - Straight male connector - Tin-plated and notched housings offering good grounding and continuity - Tin-plated solder barrel terminations - Good EMI / RFI protection - Insulating material: fiberglass polyester Code K0196 Available Price €0.57