Tools

Shunt Resistor Ammeter DC 50A 75mV features:
- Dimensiones 12x2.5x1.8 cm

Acrylic panel for Arduino Uno with a very simple structure with rubber feet. After assembly with the 400 points breadboard, the assembly looks professional and elegant.

Plastic Box features:
- Transparent color
- Dimensions: 22,80x16x5,90cm

Laminated Copper Clad Prototype PCB Circuit Board 10x15cm, 0.35um double side.

Magnifying LED Lamp Lens 5 Inch features:
- 80 Leds, diopter 5D
- Lens size: 5 inch
- Lens material: glass
- Light source: 80 pcs LED
- Standard mount: table clamp

Magnifying LED Lamp Lens 4 Inch features:
- Diopter: 3D + 12D
- Lens size: 4 inch
- Lens material: glass
- Light source: 15pcs LED
- Standard mount: table base

Soldering Gun with Dual Color 30W/70W features:
- Power: 30W, maximum 70W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TÃœV certifications Instructions: When connected, the initial power runs at 30W.
When you press the button, the energy runs around 70W.
When you release the button, the power will slowly descend to 30W again.

Shunt resistance DC 10A Amperimeter 75mV features:
- Dimensions 12 x 2.5 x 1.8 cm

The zirconium ceramic tip of the CD-200/201 combines the wear resistance of a metal tip with the non-conductive and non-inductive properties of the plastic.
Ceramic alignment tool CD-20 features:
- Length: 11.5 cm,
- Screwdriver tip: flat,
- Tip length: 2mm.
- Suitable for: potentiometers, watchmaking, electronics components.

  IP65 waterproof case ideal for electronic projects, energy supplies, student projects, amplifiers.   Electronic waterproof plastic cover features:
  - Material: extruded plastic,
- Waterproof protective indication: IP65,
- Includes 4 screws and waterproof assembly,
- Size external: 158x90x60mm, - Dimension internal: 158x90x60mm,
- Weight: approx. 190g

Mini voltmeter with LED display 7 red 3-digit segments.
Simply connect the positive and the negative to turn it on and measure the voltage.
Mini voltmeter with LED display 7 red segments 3 digits 3.5-30 VDC - 1% features:
- Operating voltages (measurement): 3.5 - 30 VDC,
- Color of the LED segments: red,
- Update speed: approx. 500ms,
- Accuracy of the measurement: ± 1%,
- No need power supply: it is powered with the measured voltage,
- Cable length included: 10cm,
- Size: 30x12x9mm.

Mini voltmeter with LED display 7 green 3-digit segments.
Simply connect the positive and the negative to turn it on and measure the voltage.
Mini voltmeter with LED display 7 green segments 3 digits 3.5-30 VDC - 1% features:
- Operating voltages (measurement): 3.5 - 30 VDC,
- Color of the LED segments: green,
- Update speed: approx. 500ms,
- Accuracy of the measurement: ± 1%,
- No need power supply: it is powered with the measured voltage,
- Cable length included: 10cm,
- Size: 30x12x9mm.

Soldering Station 48W + Soldering Set features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 450 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

Ammeter 0-1 A (DC) with needle model 91C16 transparent with integrated shunt.
DC 0-1A Analog Ammeter 91C16 class 5 features:
- Model: 91C16
- Scale range: 0-1A (DC)
- Accuracy: class 5
- Transparent color
- External size: 4 x 4 x 1.1cm
- Panel size: 3.4 x 1.8 x 0.4cm
- Integrated shunt

Ammeter 0-5 A (DC) with needle model 91C16 transparent with integrated shunt.
DC 0-5A Analog Ammeter 91C16 class 5 features:
- Model: 91C16
- Scale range: 0-5A (DC)
- Accuracy: class 5
- Transparent color
- External size: 4 x 4 x 1.1cm
- Panel size: 3.4 x 1.8 x 0.4cm
- Integrated shunt

Electric precision drill & gringer 12V features:
- electric drill: 12000 rpm, with on/off switch - grinder stone: 2 pcs - engraving bit: 2 pcs - collet: 2 pcs - direct driven   Specifications power: - 4 W (no load) / 16 W (load) / max. 20 W - speed: 12000 rpm - power supply: 12 VDC 0.4 A (not incl.) - drilling Ø: 1 mm   

DC 15V Analog Panel Voltmeter 0 to 15V Round features:
- 15V 0-15V DC analog voltage panel meter
- Type: Analog voltage meter
- Range of scale: DC 0-15V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

  Mini voltmeter with LED display 7 red 3-digit segments.
Simply connect the positive and the negative to turn it on and measure the voltage.   Mini voltmeter with LED display 7 blue segments 3 digits 3.5-30 VDC - 1% features:
  - Operating voltages (measurement): 3.5 - 30 VDC,
- Color of the LED segments: blue
- Update speed: approx. 500ms,
- Accuracy of the measurement: ± 1%,
- No need power supply: it is powered with the measured voltage,
- Cable length included: 10cm,
- Size: 30x12x9mm.

ProtoShield Prototype Expansion Board with Mini Breadboard 170 points for Arduino Mega2560 V3.0 features:
- To mount your projects in a comfortable and orderly way, access to all the pins of Arduino Mega2560, it has a universal plate and protoboard zone, 5V and Gnd buses, reset pushbutton, pushbutton and 2 general purpose leds, zones for integrated Soic and Dip
- The seamless mini breadboard has 170 connection points.
- You can stick on the shield with its self-adhesive back.

The JDS6600 series DDS signal generator can generate sine waves, square waves, triangle waves, pulse waves and arbitrary waves, etc. The frequency will be up to 15MHz. And it has duty cycle correction, amplitude modulation function and frequency sweep function etc. It can display output signal, amplitude and frequency at the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratories. There are 5 models, JDS6600-60M, JDS6600-50M, JDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the maximum sine wave output frequency. JDS6600 -15MHZ is the maximum output frequency of the sine wave.

Practical magnetic plate for repair the magnetic screws needed for Apple, Samsung and other mobile phones.
The screw position prevents the occurrence of errors, offers an excellent way to store and organize screws or other small metal objects.
High quality dry erase surface.
It can be used repeatedly, with slate pencil to write, convenient to record and memory to facilitate.
Universal Magnetic Project Mat Plate 30cmx25cm features:

Material: silicone
Made of high quality silicone, solid and durable, easy to clean with a dry cloth.
Color: Black and white (as shown in the pictures)
Mat Thickness: 0.8mm
Size (L * W): 30 * 25cm

2x Protoboard Breadboard 5x7cm EGPC features:
-PCB dimension: 5x7cm
-Hole diameter: 1mm
-Pitch: 2.54mm
-Bakelite with copper fields

The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display

ESD compatible gloves made of polyester with woven conductive fibres.

MB-102 Prototype Board + 65x Jumper Cable + Power Module 3.3V 5V Arduino features:
* 65 Male-Male jumper cables:
-Cable lengths: 120mm, 150mm, 200mm, 240mm * MB-102 breadboard:
-830 Connections
-Measures 165x55x8 mm
* Module:
-Input voltage up to 12V
-Maximum current 700mA

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1mm 1.0 features:
- Material: Copper
- Length: 1.5m
- Width: 1.0mm
- Desoldering Braid Solder Remover Wick 1mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 1.5mm
- Desoldering Braid Solder Remover Wick 1.5mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2mm features:
- Material: Copper
- Length: 1.5m
- Width: 2mm

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 2.5mm

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 3mm features:
- Material: Copper
- Length: 1.5m
- Width: 3mm

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 0.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 0.5mm

Soldering Iron Cleaner with Brass Ball Holder features:
- Brass wire cleaner for solder tips with support
- It allows to remove the welding residues from the tips
- Cleans better and does not cause temperature drops as with sponges
- You do not need extra water to clean the tip
- Easy and effective cleaning at the tip
- Dimensions: diameter 50mm
- Support dimensions: 60x68mm

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm

3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80 mm
- Length 70 mm
- Long duration tip

Long Life Replacement Tip Welder B11 Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80mm
- Length 70 mm
- Long duration tip
- Quantity: 1 unit

Long Life Replacement Tip Welder B12 Ø 3.8mm 40W features:
  - Power: 40W
- Rod: ø 3.80mm
- Length: 70 mm
- Long duration tip
- Quantity: 1 unit

Long Life Replacement Tip Welder B13 Ø 3.8mm 40W features:
- Power: 40W
- Rod: ø 3.80mm
- Length: 70 mm
- Long duration tip
- Quantity: 1 unit

Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron features:
- Power: 48W
- Length: 65 mm
- Long duration tip
- Quantity: 1 unit

Replacement Soldering Long Life Tip C1-3 Ø 3.0mm for 48W Soldering Station features:
- Power: 48W
- Length: 65 mm
- Long duration tip
- Quantity: 1 unit

Spare tip C1-4 Ø 2.0mm soldering station 48W features:
- Tip C1-4,
- Length: 65mm,
- Quantity : 1 pc.

Blue sponge to clean the tip of your soldering iron to the tin.
Blue cleaning sponge for soldering iron tip with pre-cut circle at the center features:
- Circle diameter 17mm precut to the center of the sponge,
- Size: 55x55mm,
- Material: sponge,
- Color: blue,
- Quantity: 1.

Blue sponge to clean the tip of your soldering iron to the tin.
Blue cleaning sponge for soldering iron tip features:
- Size: 50x35mm,
- Material: sponge,
- Color: blue,
- Quantity: 1.

Mini Soldering Iron Stand features:
- Mini Holder for tin soldering iron
- Dimensions: 65x 40mm

Soldering Iron Holder features:
- Comes supplied with a special replaceable sponge, for use in cleaning the tip
- Suitable for use with most welders
- Dimensions of base: 84 x 130 mm
- Weight: 0.2kg

Soldering PCB Holder 200x140mm Adjustable 360 Degrees features:
- Support for welding, repair
- Adjustable support 360 degrees
- Tool for mobile repair
- Circuit Board Repair Moviles
- High quality
- Weight: 0.7kg
- Dimensions: Approx. 300x165x125mm

Mini Holder Soldering Iron Stand features:
- Dimensions: 65x 42mm

It is a very ideal tool when the third hand is required.
Helping Magnifying Hand Tool features:
- Magnifying glass diameter 60mm
- Weight: 0.5kg
- Dimensions: approx. 15 (26) x 17 x 7cm 

Soldering Iron Stand Holder features:
- Comes supplied with a special replaceable sponge, for use in cleaning the tip
- Suitable for use with most welders
- Base dimensions: 78 x 110 mm
- Weight 0.4kg

Electronic Antistatic Wrist Bracelet ESD Blue features:
- Electronic Antistatic Bracelet, blue color
- Protection against electrostatic charges
- Adjustable bracelet with crocodile clip connector
- Material: The conductive elastic band is made of nylon and woven in stainless steel
- Extensible length up to 180 centimeters
- Weight: 25 gr.
- Quantity: 1 loose unit in plastic bag

Desoledring Pump with Heater 40W 220V features:
- It allows to remove tin
- Easy to use with one hand.
- Desoldering pump with heater
- Consumption: 40W
- CE Certificate
- Quantity: 1 unit

Desoldering iron for the removal of excess tin. You can quickly and effectively remove solder from a plate or circuit.
Replaceable antistatic nozzle.
Manufactured in Aluminum.
Aluminum Desoldering Pump Tin Antistatic Suction features:
- Length: 190mm
- Desoldering pump
- High suction power
- Replaceable long-life silicone tip
- Light weight
- Easy use with one hand, light and resistant
- Vacuum Solder Aluminum Desoldering Pump Solder Remover Pump Tool
- A good quality product for fast and efficient removal of excess solder, ideal for PCB repair
- High-capacity spring-loaded plunger quickly eliminates welding in one action. The Pumping tool easily
- Disassemble for a quick clean

Vacuum Pump Components SMD Suction Cup Suction features:
- An economical option for suction for handling SMD components
- Includes 3 suckers of different sizes

Nozzle Throat 1.75mm 3D Printer PTFE features:
- Compatible with 1.75mm filament
- Inner diameter: 2 mm
- Exterior: 6 mm (M6 thread)
- Total length: 30 mm
- Comes with Teflon PTFE core 26mm long
- Outside diameter: 4 mm
- Application: makerbot 3D printer extruder
- Material: Stainless steel

Flux Gel 10ml Based on RMA Colophony features:
- Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive
- Shape: gel
- Capacity: 10ml
- Plastic Packaging
- SMT mounting time up to 36 hours
- Retains stickiness at 72 hours
- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb
- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding
- Keep out of reach of children
- Use in ventilated spaces
- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water

Liquid Flux Alcohol Base TK83 100ml 
Flux liquid alcohol based for electronic welding. Type of flux: rosin
No Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC.

It can be used to demagnetize tools or parts that you do not want to magnetize. Especially for magnetizing screwdriver bits or almost anything else. No batteries or electricity required, portable and easy to use.

Soldering tip cleaner allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.

Soldering iron with B1 tip, ideal for electronics. Power of 40W.

- Power: 40W

- Power supply: 230V

- Equipped with B1 tip

- Long life tip: 1mm

- Anti-heat handle

- CE, RoHS and TÃœV certifications

A small, tip soldering station. It has the ability to adjust the temperature in the range from 100 ° C to 450 ° C. The total power is 8 W.

Plastic Box features:
- Transparent color
- Dimensions: 25x17x5cm.

Laminated Copper Clad Prototype PCB Circuit Board 10x15cm, 35um single side.

Soldering Iron 40W features:
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TUV certifications

Soldering Iron 60W, CE Rohs compliant.

The 908S 80W soldering iron has a power of 80W equipped with the 900M-B1.2 tip, LCD display to show the temperature setting (180 ~ 500 ℃). Fast heating. The tip is replaceable. The soldering iron is CE, RoHS certified. The kit includes 5 replacement tips and a welding holder.

Learn how to weld in the most fun and useful way with this luminous Christmas tree. Follow our practical and simple guide step by step, and decorate your home with this flashing Christmas tree. Soldering is an essential technique in electronics and what better way to learn than with this specially prepared kit. 

Its 7 colour RGB LEDs change colour and flash, illuminating any surface in an innovative way for Christmas.

This connector is widely used in thermocouple and RTD circuits, giving a fast and good contact solution. It is designed with a good insulation, metal pins, its construction ensures a good contact.

Solder dispenser for convenient and faster soldering. Easily supplies you with solder in a fixed structure.

12V electric drill, with ON/OFF switch with 2 grinding tips, 2 burrs, 4 nozzles

  IP65 waterproof case ideal for electronic projects, energy supplies, student projects, amplifiers.   Electronic waterproof plastic cover features:
  - Material: extruded plastic,
- Waterproof protective indication: IP65,
- Includes 4 screws and waterproof assembly,
- Size external: 158x90x60mm, - Dimension internal: 158x90x60mm,
- Weight: approx. 190g

Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode.

The device is designed to find and identify cables without disturbing the insulation. Finds broken wires, fault points and continuity test.

Silicone Gun 15W features:
- Hot glue hot melt adhesive + 2 bars
- Blister packaging
- Consumption: 15W
- Includes 2 silicone bars 7,4mm x 95mm

Waterproof Electronic ABS Plastic Junction Prototype Box 84x60x34mm features:
- Excellent waterproof performance and moisture proof
- Dimension 84x60x34mm

Waterproof Electronic ABS Plastic Junction Prototype Box 128x63x37mm features:
- Excellent waterproof performance and moisture proof
- Dimension 128x63x37mm