Screen OLED 0.96" 128x64 White SPI I2C 7 Pin Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption: 0.08W - Operating temperature: -20 to 70 ºC - PCB board dimension: 27 x 27mm - Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. - OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc. Code P0026 Available Regular price €5.00 -€1.50 Price €3.50
Module L298P DC 2A Motor Management Shield Bluetooth Interface PWM This module, which uses the exclusive L298P chip for driving high-power motors, can directly control two DC motors, with a drive current up to 2A. The motor output uses eight-speed Schottky diodes as protection.The design of the letter allows you to connect directly to the Arduino UNO R3 for easier use. Module L298P DC 2A Motor Management Shield Bluetooth Interface PWM features: - 1 logical step of the input voltage VD: 5 VDC- Control of the input voltage VS and control by pulse width modulation: - VIN input: 6 - 12 VDC - PWRIN input: 4.8 - 35 VDC- Logic current flow: Iss <36m A- Operation current management: Io <2 A- Maximum power dissipation 25W (T = 75 ° C)- Input of the control signal: Code M0136 Available Regular price €11.50 -€1.51 Price €9.99
2x LM317T Voltage Regulator DC-DC 1.2V - 37V 1.5A TO-220 2x LM317T Voltage Regulator DC-DC 1.2V - 37V 1.5A TO-220 features: - Output type: adjustable- Voltage Output: 1.2V to 37V- Manufacturer: ST Microelectronics- Current Output: 1.5A- Input voltage Vi- Max Vo: 40V- Operating temperature: 0ºC to + 125ºC- Encapsulated: TO-220- Polarity: Positive- Quantity: 2 units Code T0005 Available Price €0.59
M3 Hexagonal Spacer 25mm Male - Female Brass Characteristic: -Metric thread M3 -Male-Female separator 25mm -Quantity: 5 units Code H0048 Available Price €0.45
L298N Motor Drive Controller Board Module Dual H Bridge DC It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. L298N Motor Drive Controller Board Module Dual H Bridge DC features: - Minimum operating voltage: 5 V- Maximum operating voltage: 35 V- Maximum current: ± 2 A- Logic voltage: 5V- PWM signal inputs for speed control- Outputs: for 2 DC motors or for a bipolar stepper motor- Measures: 43x43x24 mm Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles Code M0100 Available Price €2.79
Third hand support for cable soldering Third hand stand for easy soldering of wires with a diameter from 1 to 5mm. Number of holes 5. Code MX0001 ✗ Out-of-Stock Regular price €3.79 -€0.90 Price €2.89
Rocker Switch KCD11 250V/3A On/Off SPST Rocker Switch 3A 250V On/Off SPST features: - AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch- Rocker switch; Type: On/Off (SPST)- Control on and off SPST and 2 terminals- Voltage and Current: AC250V, 3A- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)- Black Code K0092 Available Price €0.95
SN-28B Dupont Crimper Terminal The components of the ratchet crimping pliers are made of special steel. Designed according to human engineering factors, 50% energy can be saved when crimping. AWG: 28 - 18 Length: 190 mm (approx.) Crimp capacity: 0.1 - 1.0 mm². For 2.54 mm 3.96 mm KF2510 connector weight 0.35kg Code H0052 Last items in stock Price €21.95
Digital Voltmeter Blue 0V to 30V DC 0.56 LED The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display Code M0205 ✗ Out-of-Stock Regular price €2.49 -€0.50 Price €1.99
Digital Voltmeter Green 0V to 30V DC 0.56 Digital Voltmeter Green 0V to 30V DC 0.56 features: - Measurement range: 0-30 Vdc - Supply voltage: 3.5-30 Vdc - Screen: 0.56 € Green Led - Color: black - Includes reverse polarity protection - Operating current: Code M0066 Available Price €2.79
Voltmeter Ammeter Red Blue Digital DC 100V 50A + Shunt Voltmeter Ammeter 100V 50A Shunt Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA. - Screen: red LED color (Voltage) and blue LED color (Intensity) - Includes protection against reverse polarity - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: -10ºC to 65ºC Useful links for Arduino / Raspberry programming and projects with Arduino /> Code M0075 Available Price €8.99
Digital Voltmeter Green 0-200V DC 0.56 Digital Voltmeter Green 0-200V DC 0.56 features: - 3-wire recessed LED Voltmeter - No battery needed - Measurement range: 0-200 Vdc - Supply voltage: 4.5-30 Vdc - Screen: 0.56 € Green Led - Color: Black - Includes reverse polarity protection - Operating current: Code M0046 ✗ Out-of-Stock Regular price €2.79 -€0.50 Price €2.29
Voltmeter Ammeter 100V 50A Digital DC Red Blue Voltmeter Ammeter 100V 50A Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Useful links for Arduino /> Code M0073 Available Price €6.89
Current and Voltage Meter Tester Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets.The voltage and current are shown successively.Current and Voltage Meter Tester features:- Operating range: - Voltage 3 - 7,5V - Current 0 -3A- Resolution: 10mV 1mA- Error: <± 1.5%%- Dimensions: 5.2 x 2 x 1.5 cm Code K0081 Available Price €2.89
Shunt resistance DC 10A Amperimeter 75mV Shunt resistance DC 10A Amperimeter 75mV features: - Dimensions 12 x 2.5 x 1.8 cm Code M0165 Available Price €2.99
Voltmeter Amperemeter DC Red and Blue 100V 10A Voltmeter Amperemeter DC Red and Blue 100V 10A features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 10A (± 1%) - Min current resolution: 0.01A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Code M0068 Available Price €3.99
Mini voltmeter with LED display 7 blue segments 3 digits 3.5-30 VDC - 1% Mini voltmeter with LED display 7 red 3-digit segments.Simply connect the positive and the negative to turn it on and measure the voltage. Mini voltmeter with LED display 7 blue segments 3 digits 3.5-30 VDC - 1% features: - Operating voltages (measurement): 3.5 - 30 VDC,- Color of the LED segments: blue- Update speed: approx. 500ms,- Accuracy of the measurement: ± 1%,- No need power supply: it is powered with the measured voltage,- Cable length included: 10cm,- Size: 30x12x9mm. Code M0201 Available Regular price €2.50 -€0.50 Price €2.00
Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 features:- Measuring range: from 3.5 VDC to 30 VDC ±% 1- Operating current: <30mA- Measuring refresh time: 500ms- Dimensions: 54mm x24mm x15mm- Cable length: 85 mm- Color: Black- Display: Blue LED- Operating temperature: -10ºC to 65ºC Code M0038 ✗ Out-of-Stock Regular price €3.99 -€1.00 Price €2.99
Digital Voltmeter Blue 0V to 30V DC 0.56 LED The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display Code M0205 ✗ Out-of-Stock Regular price €2.49 -€0.50 Price €1.99
Digital Voltmeter Green 0V to 30V DC 0.56 Digital Voltmeter Green 0V to 30V DC 0.56 features: - Measurement range: 0-30 Vdc - Supply voltage: 3.5-30 Vdc - Screen: 0.56 € Green Led - Color: black - Includes reverse polarity protection - Operating current: Code M0066 Available Price €2.79
Voltmeter Ammeter Red Blue Digital DC 100V 50A + Shunt Voltmeter Ammeter 100V 50A Shunt Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA. - Screen: red LED color (Voltage) and blue LED color (Intensity) - Includes protection against reverse polarity - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: -10ºC to 65ºC Useful links for Arduino / Raspberry programming and projects with Arduino /> Code M0075 Available Price €8.99
Digital Voltmeter Green 0-200V DC 0.56 Digital Voltmeter Green 0-200V DC 0.56 features: - 3-wire recessed LED Voltmeter - No battery needed - Measurement range: 0-200 Vdc - Supply voltage: 4.5-30 Vdc - Screen: 0.56 € Green Led - Color: Black - Includes reverse polarity protection - Operating current: Code M0046 ✗ Out-of-Stock Regular price €2.79 -€0.50 Price €2.29
Voltmeter Ammeter 100V 50A Digital DC Red Blue Voltmeter Ammeter 100V 50A Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Useful links for Arduino /> Code M0073 Available Price €6.89
Current and Voltage Meter Tester Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets.The voltage and current are shown successively.Current and Voltage Meter Tester features:- Operating range: - Voltage 3 - 7,5V - Current 0 -3A- Resolution: 10mV 1mA- Error: <± 1.5%%- Dimensions: 5.2 x 2 x 1.5 cm Code K0081 Available Price €2.89
Shunt resistance DC 10A Amperimeter 75mV Shunt resistance DC 10A Amperimeter 75mV features: - Dimensions 12 x 2.5 x 1.8 cm Code M0165 Available Price €2.99
Voltmeter Amperemeter DC Red and Blue 100V 10A Voltmeter Amperemeter DC Red and Blue 100V 10A features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 10A (± 1%) - Min current resolution: 0.01A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Code M0068 Available Price €3.99
Mini voltmeter with LED display 7 blue segments 3 digits 3.5-30 VDC - 1% Mini voltmeter with LED display 7 red 3-digit segments.Simply connect the positive and the negative to turn it on and measure the voltage. Mini voltmeter with LED display 7 blue segments 3 digits 3.5-30 VDC - 1% features: - Operating voltages (measurement): 3.5 - 30 VDC,- Color of the LED segments: blue- Update speed: approx. 500ms,- Accuracy of the measurement: ± 1%,- No need power supply: it is powered with the measured voltage,- Cable length included: 10cm,- Size: 30x12x9mm. Code M0201 Available Regular price €2.50 -€0.50 Price €2.00
Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 features:- Measuring range: from 3.5 VDC to 30 VDC ±% 1- Operating current: <30mA- Measuring refresh time: 500ms- Dimensions: 54mm x24mm x15mm- Cable length: 85 mm- Color: Black- Display: Blue LED- Operating temperature: -10ºC to 65ºC Code M0038 ✗ Out-of-Stock Regular price €3.99 -€1.00 Price €2.99