Flux Gel 10ml Based on RMA Colophony

Soldering tip cleaner allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.

Flux Colophony Rosin Core 100g features:
Flux rosin, solid resin, neutral ph for correct electronic welding.
-Does not cause corrosion of non-ferrous metals
-Does not cause short circuits
-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners
-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics works
Use a toothpick for the application. Do not apply in excess.
SECURITY:
-Use in ventilated spaces. Do not inhale vapors that are released when welding
-Keep the pot tightly closed and out of reach of children
-Do not eat. It is not toxic
-Rarely irritating to skin contact

60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:
- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.
- Fusing temperature 183°C/190°C.
- Alloy: Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

Aqueous PCB cleaner
Water-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.
It causes the saponification of the rosin and the dissolution of the flow residues.
Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.
Does not attack metal and aluminum surfaces.
Water-Based Cleaner PCB features:
- Type of chemical preparation: aqueous stripper of PCB printed plates
- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components
- Form: Liquid
- Capacity: 1l

3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80 mm
- Length 70 mm
- Long duration tip

- The product protects PCB plates, allows for easier welding
- The product protects the printed circuit boards against oxidation and corrosion during storage.
- This allows a faster welding and avoids the "cold welding".
- The application method allows easy distribution of the product on the plates.
- Can be used during production, repair, maintenance and service.
Flux Varnish LT-4 Plate Protector features:
- Shape: Spray
- Capacity: 100ml
- Rosin RMA
- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.
Application:
- PCB protection against oxidation,
- Applied in the production of printed circuit boards immediately after engraving,

Third hand stand with LED lamp and crocodile clips. It has a backlight with 5 bright LEDs and two additional mini-lights.

SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features:
Flux liquid alcohol-based for electronic welding.
Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
Form: liquid
Capacity: 50ml
Content of solid bodies: 0 ... 5%
Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.
It cleans easily with alcohol.
It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.
- Keep the boat tightly closed and far away from the children.
- Use in ventilated spaces.

Magnifying LED Lamp Lens 5 Inch features:
- 80 Leds, diopter 5D
- Lens size: 5 inch
- Lens material: glass
- Light source: 80 pcs LED
- Standard mount: table clamp

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm