Desoldering Wire 2.5mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 2.5mm features:- Material: Copper- Length: 1.5m- Width: 2.5mm Code H0007 Available Price €1.79
DS18B20 Submersible Probe Sensor Temperature Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.DS18B20 Submersible Probe Sensor Temperature features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Red Vcc - Yellow digital output- Inocidable steel- Cable length: 1m Code S0019 Available Price €2.39
Micro:bit BBC v2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0111 ✗ Out-of-Stock Price €21.99
HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.79
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 16g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:- 16 gr. welding wire of 1 mm diameter. 60% tin, 40% lead- Melting temperature 187/190 C- Alloy Sn60Pb40- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required. - Quantity: 1 unit- High quality - manufactured in EU Code Q0114 Available Price €1.79
Wire stripping pliers The pliers enable precise cutting and stripping of single and multi-core cables with diameters between 0.8 and 2.6 mm / 110-20 AWG. Code H0579 Available Price €3.99
Resistor 220 Ohm 5% 0,25W 1/4W Resistor 220 Ohm 5% 0,25W 1/4W features:-220 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0008 Available Price €0.08
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
Long Life Replacement Tip Welder B12 Ø 3.8mm 40W Long Life Replacement Tip Welder B12 Ø 3.8mm 40W features: - Power: 40W- Rod: ø 3.80mm- Length: 70 mm- Long duration tip- Quantity: 1 unit Code H0013 Available Price €2.29
Soldering PCB Holder 200x140mm Adjustable 360 Degrees Soldering PCB Holder 200x140mm Adjustable 360 Degrees features: - Support for welding, repair- Adjustable support 360 degrees- Tool for mobile repair- Circuit Board Repair Moviles- High quality- Weight: 0.7kg- Dimensions: Approx. 300x165x125mm Code H0050 Available Price €12.95
Soldering Tip Cleaning Ball It allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip.Soldering Tip Cleaning Ball features:- Dimensions: diameter 50mm Code H0010 Available Price €1.29
Magnifying LED Lamp Lens 5 Inch Magnifying LED Lamp Lens 5 Inch features: - 80 Leds, diopter 5D- Lens size: 5 inch- Lens material: glass- Light source: 80 pcs LED- Standard mount: table clamp Code H0143 Available Regular price €60.00 -5% Price €57.00
Flux Welding Paste 20g Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C. - Flux paste based on activity rosin medium. - Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints . Operating temperature up to 350 C. Code Q0025 Available Price €1.89
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
Flux Colophony Rosin Core 40g Flux Colophony Rosin Core 40g features:Flux rosin, solid resin, neutral ph for a correct electronic welding.- They do not cause corrosion of non-ferrous metals- Does not cause short circuitsIt melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.Use a toothpick for the application. Do not apply in excess.Security:- Use in ventilated spaces. Do not inhale vapors that are released when welding- Keep the pot tightly closed and out of the reach of children- Do not eat. It is not toxic- Rarely irritating to skin contact Code Q0011 Available Regular price €2.49 -€0.50 Price €1.99
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0002 ✗ Out-of-Stock Price €3.95
Soldering Iron Cleaner with Brass Ball Holder Soldering Iron Cleaner with Brass Ball Holder features: - Brass wire cleaner for solder tips with support- It allows to remove the welding residues from the tips- Cleans better and does not cause temperature drops as with sponges- You do not need extra water to clean the tip- Easy and effective cleaning at the tip- Dimensions: diameter 50mm- Support dimensions: 60x68mm Code H0100 Available Price €4.79
Long Life Replacement Tip Welder B11 Ø 3.8mm Long Life Replacement Tip Welder B11 Ø 3.8mm features: - Power: 40W- Rod ø 3.80mm- Length 70 mm- Long duration tip- Quantity: 1 unit Code H0012 ✗ Out-of-Stock Price €2.19
Long Life Replacement Tip Welder B12 Ø 3.8mm 40W Long Life Replacement Tip Welder B12 Ø 3.8mm 40W features: - Power: 40W- Rod: ø 3.80mm- Length: 70 mm- Long duration tip- Quantity: 1 unit Code H0013 Available Price €2.29
Soldering PCB Holder 200x140mm Adjustable 360 Degrees Soldering PCB Holder 200x140mm Adjustable 360 Degrees features: - Support for welding, repair- Adjustable support 360 degrees- Tool for mobile repair- Circuit Board Repair Moviles- High quality- Weight: 0.7kg- Dimensions: Approx. 300x165x125mm Code H0050 Available Price €12.95
Soldering Tip Cleaning Ball It allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip.Soldering Tip Cleaning Ball features:- Dimensions: diameter 50mm Code H0010 Available Price €1.29
Magnifying LED Lamp Lens 5 Inch Magnifying LED Lamp Lens 5 Inch features: - 80 Leds, diopter 5D- Lens size: 5 inch- Lens material: glass- Light source: 80 pcs LED- Standard mount: table clamp Code H0143 Available Regular price €60.00 -5% Price €57.00
Flux Welding Paste 20g Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C. - Flux paste based on activity rosin medium. - Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints . Operating temperature up to 350 C. Code Q0025 Available Price €1.89
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
Flux Colophony Rosin Core 40g Flux Colophony Rosin Core 40g features:Flux rosin, solid resin, neutral ph for a correct electronic welding.- They do not cause corrosion of non-ferrous metals- Does not cause short circuitsIt melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.Use a toothpick for the application. Do not apply in excess.Security:- Use in ventilated spaces. Do not inhale vapors that are released when welding- Keep the pot tightly closed and out of the reach of children- Do not eat. It is not toxic- Rarely irritating to skin contact Code Q0011 Available Regular price €2.49 -€0.50 Price €1.99
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0002 ✗ Out-of-Stock Price €3.95
Soldering Iron Cleaner with Brass Ball Holder Soldering Iron Cleaner with Brass Ball Holder features: - Brass wire cleaner for solder tips with support- It allows to remove the welding residues from the tips- Cleans better and does not cause temperature drops as with sponges- You do not need extra water to clean the tip- Easy and effective cleaning at the tip- Dimensions: diameter 50mm- Support dimensions: 60x68mm Code H0100 Available Price €4.79
Long Life Replacement Tip Welder B11 Ø 3.8mm Long Life Replacement Tip Welder B11 Ø 3.8mm features: - Power: 40W- Rod ø 3.80mm- Length 70 mm- Long duration tip- Quantity: 1 unit Code H0012 ✗ Out-of-Stock Price €2.19