Digital Voltmeter Blue 0V to 30V DC 0.56 LED
  • Digital Voltmeter Blue 0V to 30V DC 0.56 LED

Digital Voltmeter Blue 0V to 30V DC 0.56 LED

M0205

The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display

OEM
Add to wish list

The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display

Features :

  • Measuring range: 0-30 Vdc
  • Supply voltage: 3.5-30 Vdc
  • Display: 0.56" blue LED
  • Colour: black
  • Reverse polarity protection included
  • Operating current: <,60mA
  • Measurement refresh time: 500ms
  • Display dimensions: 48 x 29mm
  • Total depth: 22mm
  • Cable length: 130mm
  • Recessing hole: 46 x 26mm
  • Operating temperature: -10ºC to 65ºC
  • Red: positive power supply (3.5 - 30V)
  • Black: negative
  • Yellow/White: voltage to be measured positive

Customers who bought this product also bought

DC Gear Motor N20 200 RPM 12V DIY Robot

DC Gear Motor N20 200 RPM 12V DIY Robot features:
- Voltage: 12V
- Speed of rotation: 200RPM
- Motor dimensions:
* Diameter 12 mm
* Height 24 mm
- For Arduino, Smart Car, Robotics, Fans, Appliances

R0035

Regular price €4.88 -€1.00 Price €3.88

Screen OLED 0.96" 128x64 White SPI I2C 7 Pin

Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features:
- Oled 0.96 "screen with 128 * 64 pixels
- Drive IC model SDD1306
- Power: 3V-5.5V - Viewing angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption: 0.08W
- Operating temperature: -20 to 70 ºC
- PCB board dimension: 27 x 27mm
- Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
- OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc.

P0026

Regular price €4.13 -€1.50 Price €2.63

8A DC Step-down Converter 8-40V to 1.25-35V Current Control XL4016

A high-performance regulator-booster.
24V battery charger - DC / CV method.
Power supply of the laptop from a 12V car battery.
A high-performance dimmer-regulator.
Charger for Li-Ion, Li-Po batteries etc. - CC / CV method.
LED Constant current driver for LED diodes.
Characteristic:
- Input voltage: 6V -40V
- Output voltage: 1.25-35V (adjustable)
- Output current: 8A, (10A maximum)
- Output power: 300W maximum
- Efficiency of Conversion: up to 95%
- Wiring: Solderless terminal
- Operating frequency: 300kHz
- Ambient temperature exceeds 40 ° C, increase heat dissipation
- LED indicator two-color;
- Charge red
- Fully charged light green
- No charge green

A0011

Price €6.57

Arduino compatible Nano V3.0 CH340 board

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0006

Price €4.55

LCD Display Screen Green 20x4 2004

- It consists of a screen of 20 characters and 4 rows
- Ideal for projects with ARDUINO
- You can use it with PIC, AVR, STM32 LCD Display Screen Green 20x4 2004 features:
- LCD screen, 20 characters and 4 lines
- 5V power
- Retro green background illuminated, black letters

P0017

Price €7.02

40x Male to male cables 20cm

Characteristic: -Length: 20cm
-Quantity: 40 cables
-Mono Dupont connectors on both ends
-Compatible with 2.54mm female connectors
-High quality and good working condition
-Easy to install and use

K0006

Price €2.06

DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of voltage and current.
DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo features:
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Current output: adjustable, 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 26mm x 14mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

A0014

Price €2.88
€2.06
Save €0.50 €1.56

1,56 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Regular price €2.06 Price €1.56

Order until 4pm we will send today
30 days return