Soldering Iron Stand Holder

The 2.5mm female jack connector is a connector to provide power to computers, LED TVs, routers, etc ...
This 2.5mm female jack connector adapter soldered on a PCB board, is ideal for use in our projects.
It has connection points where we can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
Adapter 2.5mm female power jack with PCB features:
- Connector type: 2.5mm female jack ,
- Color: black,
- Nominal voltage: 12v DC,
- Maximum current: 0.5A DC,
- Insulation resistance: ‰ ¥ 100MΩ,
- Operating temperature: -25ºC to + 85ºC,
- Number of output pins: 3
- Pitch between output pins: 2.54mm.

Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º.
An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features:
- Infrared sensor with control circuit
- Adjustable sensitivity and time
- Operating voltage: 4.5V- 20V
- Consumption in Idle state:

High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side.
Ideal for your Arduino projects, but can also be used with other microcontrollers.
Matrix Membrane Keyboard 4x4 Modulo features:

- Rating circuit, Max: DC 35V 100 mA
- Cable length: 85 mm
- Dupont 8 pin connector
- Specific insulation: 100 M Ohm, 100V
- Useful life: + 1 million uses
- Contact parting:

Buzzer alarm to convert electrical to acoustic signals in robotics devices and Arduino projects.
Buzzer 5V Active Buzzer 4 to 7V DC features:

- Input voltage: 4V to 7V
- Diameter: 12mm
- Height: 9.5mm
- Spacing Pins: 7.6mm
- Maximum Current:

Integrated Circuit Supports DIP28 Width 10.16 mm features:
- Type: DIP DIL
- Total number of pins: 28
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 33.02 mm
- Width: 10.16 mm
- Min temperature: -25 °C
- Max temperature: +85 °C
- Compliant with the RoHS standard

Characteristic: -Conductor: solid wire, tinned copper
-Insulation: PVC
-Low voltage electrical cables - Nominal voltage 300V / 80C -Standard: UL 1007
-Number of conductors: 22AWG, 1x0.35mm2
-Outer diameter: 1.6mm

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 51 x 19 x 16 mm

Anti-Static Tweezers ESD 117mm features:
- Anti-static tweezers, curved tip, matt black
- Length: 117mm
- Width: 10mm
- ESD pliers
- High precision, without producing dust, resistant to high temperatures