Matrix Membrane Keyboard 4x4 Modulo High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side. Ideal for your Arduino projects, but can also be used with other microcontrollers. Matrix Membrane Keyboard 4x4 Modulo features: - Rating circuit, Max: DC 35V 100 mA - Cable length: 85 mm - Dupont 8 pin connector - Specific insulation: 100 M Ohm, 100V - Useful life: + 1 million uses - Contact parting: Code M0025 Available Price €1.79
Capsule Electret Condenser Microphones 9.5mm MIC Capsule Electret Condenser Microphones 9.5 MIC features: - Measures: 9.7 x 6.7mm- Impedance: 1.5kΩ- Working current: 0.5mA- Working voltage: 4.5V (1.5-10V)- Bandwidth: 50 ... 16000Hz- Signal to noise ratio: ‰¥58dB- Sensitivity: -42 ± 3dB- Sensitivity tolerance: ± 3dB- Distance between terminals: 2.54mm Code M0020 Available Price €0.79
UNO WIFI Board CH340 compatible Arduino, NodeMCU, WeMos ESP8266 - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields Characteristic: - ATmega328P 16MHz chip with external quartz crystal- Microprocessor: ATMega328P- Operating voltage: 5V- Input voltage (recommended): 7-12V- Input voltage (limits): 6-20V- Clock speed: 16 MHz- Digital I / O pins: 14 (6 with PWM)- Analog input pins: 6- DC current for Pin I / O: 20 mA- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P- SRAM 2 KB - AtMega328P- EEPROM 1 KB - AtMega328P- Communication: micro USB female Code B0070 Available Price €11.99
Sonoff Mini - obsolete The Sonoff MINI is a WiFi-controlled universal switch, built with the ESP8266 chip. It works with the voltage of 230V and makes it possible to control any device anywhere in the world. Thanks to its size it is very mobile and fits in most power supplies. Code WS001 ✗ Out-of-Stock Price €9.39
Desoldering Wire 1.5mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 1.5mm features:- Material: Copper- Length: 1.5m- Width: 1.5mm- Desoldering Braid Solder Remover Wick 1.5mm / 1.5m- Pure copper braid construction- Quick removal welding- Excellent thermal for a faster and safer desoldering Code H0005 Available Price €1.79
Battery holder 1x 18650 3.7V Power cable Characteristic: - Cable 15cm long - Measurements 74x21x 19mm - Weight: 8 gr. (approx.) - Stack length max 67mm Code PP014 Available Price €0.99
5x L7805 Voltage Regulator 5V 1.5A TO-220 5x L7805 Voltage Regulator 5V 1.5A TO-220 features:-Type Output: Fixed-Voltage Output: 5V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0022 Available Price €0.39
Kapton type 10mm thermal tape Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acid and alkaline products - Resistant to solvent - Adhesive - Length Approx: 26m - Polyamide adhesive tape 10mm x 26m - Known as Kapton polyamide tape - Product for welding works on those that need to protect some component from the heat Code I0061 Available Price €2.15
Liquid Flux RF800 100ml Alcohol Based Rosin Welding Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:- Flux liquid alcohol based for electronic welding.- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- 100ml capacity- Content of solid bodies0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0022 Available Price €4.95
Soldering Iron Cleaner with Brass Ball Holder Soldering Iron Cleaner with Brass Ball Holder features: - Brass wire cleaner for solder tips with support- It allows to remove the welding residues from the tips- Cleans better and does not cause temperature drops as with sponges- You do not need extra water to clean the tip- Easy and effective cleaning at the tip- Dimensions: diameter 50mm- Support dimensions: 60x68mm Code H0100 Available Price €4.79
PCB Plus Cleanser Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Backorder Price €9.95
Electronic Antistatic Wrist Bracelet ESD Blue Electronic Antistatic Wrist Bracelet ESD Blue features: - Electronic Antistatic Bracelet, blue color- Protection against electrostatic charges- Adjustable bracelet with crocodile clip connector- Material: The conductive elastic band is made of nylon and woven in stainless steel- Extensible length up to 180 centimeters- Weight: 25 gr.- Quantity: 1 loose unit in plastic bag Code H0142 Available Price €1.85
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €11.49
Flux Solid Resin Rosin 20g Flux rosin, solid resin, neutral pH for correct electronic soldering - They do not cause corrosion of non-ferrous metals - Does not cause short circuits Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs. Use a toothpick for the application. Do not apply excessively. Safety: - Use in ventilated spaces. Do not inhale the fumes that are given off by welding. - Keep the bottle tightly closed and out of the reach of children. - Do not ingest. Non-toxic - Rarely irritating to skin contact Code Q0010 Available Price €1.69
Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €2.59
Magnifying LED Lamp Lens 4 Inch Magnifying LED Lamp Lens 4 Inch features: - Diopter: 3D + 12D- Lens size: 4 inch- Lens material: glass- Light source: 15pcs LED- Standard mount: table base Code H0144 Available Regular price €30.00 -5% Price €28.50
Antistatic Desoldering Pump Nozzle Antistatic Desoldering Pump Nozzle features: - Manual desoldering suction- Replacement nozzle for manual tin vacuum cleaner- Quantity: 1 unit Code H0024 Available Price €0.79
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Liquid Flux RF800 100ml Alcohol Based Rosin Welding Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:- Flux liquid alcohol based for electronic welding.- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- 100ml capacity- Content of solid bodies0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0022 Available Price €4.95
Soldering Iron Cleaner with Brass Ball Holder Soldering Iron Cleaner with Brass Ball Holder features: - Brass wire cleaner for solder tips with support- It allows to remove the welding residues from the tips- Cleans better and does not cause temperature drops as with sponges- You do not need extra water to clean the tip- Easy and effective cleaning at the tip- Dimensions: diameter 50mm- Support dimensions: 60x68mm Code H0100 Available Price €4.79
PCB Plus Cleanser Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Backorder Price €9.95
Electronic Antistatic Wrist Bracelet ESD Blue Electronic Antistatic Wrist Bracelet ESD Blue features: - Electronic Antistatic Bracelet, blue color- Protection against electrostatic charges- Adjustable bracelet with crocodile clip connector- Material: The conductive elastic band is made of nylon and woven in stainless steel- Extensible length up to 180 centimeters- Weight: 25 gr.- Quantity: 1 loose unit in plastic bag Code H0142 Available Price €1.85
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €11.49
Flux Solid Resin Rosin 20g Flux rosin, solid resin, neutral pH for correct electronic soldering - They do not cause corrosion of non-ferrous metals - Does not cause short circuits Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs. Use a toothpick for the application. Do not apply excessively. Safety: - Use in ventilated spaces. Do not inhale the fumes that are given off by welding. - Keep the bottle tightly closed and out of the reach of children. - Do not ingest. Non-toxic - Rarely irritating to skin contact Code Q0010 Available Price €1.69
Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €2.59
Magnifying LED Lamp Lens 4 Inch Magnifying LED Lamp Lens 4 Inch features: - Diopter: 3D + 12D- Lens size: 4 inch- Lens material: glass- Light source: 15pcs LED- Standard mount: table base Code H0144 Available Regular price €30.00 -5% Price €28.50
Antistatic Desoldering Pump Nozzle Antistatic Desoldering Pump Nozzle features: - Manual desoldering suction- Replacement nozzle for manual tin vacuum cleaner- Quantity: 1 unit Code H0024 Available Price €0.79
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95