Power Supplies

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of tension.
LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power features:
- Input voltage: 4.5-38V
- Output voltage: 1.25-36.5V
- Current output: 2A (max 3A with heat sink)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 150KHz
- Efficiency conversion: up to 92%
- Load Regulation: +/- 0.5%
- Voltage Regulation: +/- 2.5%
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Voltmeter up to 40V, remember to set the input voltage to 4.5V

Rechargeable battery XTAR 18650 2200mAh Li-ion features:
- With PCB protection circuit that protects the battery against overcharges and over discharges, increasing battery life
- Quantity: 1 unit
- Authentic Protection Battery

LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up features:
- Step-up stepper adjustable module.
- Output voltage may be greater than the input
- Use a multimeter to check the output voltage and adjust the potentiometer
- Chip LM2577S-ADJ
- Input voltage: 3.5V -35V
- Output voltage: 4-35V
- Current output: 2A, max. 3A with heat sink
- Power max. 20W
- Operating temperature: -40 to + 85 ºC
- Conversion efficiency: up to 92%
- Size: 44 x 30 mm

MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features:
- Booster module
- The output voltage may be greater than the input voltage
- Use a multimeter to check the output voltage and adjust the potentiometer
- Input voltage: 2-24V
- Output voltage: 5-28V
- Current output: 2A - Operating temperature: -40ºC to + 85ºC
- Conversion efficiency: up to 93%
- Size: 17.5 x 30 mm

Lithium Battery 3V CR2032 Button with PCB Pins features:
- 3V battery for horizontal mounting PCB printed circuit
- Quantity: 1 unit
- Diameter: 20mm
- Voltage: 3V
- Capacity: 220mAh

Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh features:
- 9V Varta Industrial 6F22 Battery
- High quality, made in Germany
- Quantity: 1 unit

600W Boost Converter Booster Module DC voltage 12V to 80V features:
- Input voltage: 10V-60V
- Output voltage: 12-80V (adjustable)
- Output current: 10A
- Input current: 15A maximum
- Output power: 600W maximum
- Conversion efficiency: up to 95% (input 30V, output 40V 5A 93%)
- Wiring: solderless terminal
- The minimum difference between the output and input voltage: 2V
- The ambient temperature exceeds 40 ° C, increase the dissipation of heat
- Short circuit protection: If between reverse polarity protection: None
- Size: 85 x 63 x 64 mm
- Weight 275g
Applications:

Characteristic:
- For long periods of storage it must be stored below 45 ° C
- After periods of Long storage will probably need to do a few charge cycles to increase capacity again
- Quantity: 1 unit
Precautions:
No Change polarity.
Do not heat the battery, or expose it to high temperatures.
Do not wet or expose to high humidity environments.

Mini DC Converter 1.8A Downstream Voltage Regulator 4.7-23V to 1.0-17V features:
- Voltage Drop Module
- Use a multimeter to check the output voltage and adjust the potentiometer
- Small size: 17mm x 11mm
- Input voltage: 4.75-23V
- Output voltage: 1.0-17V
- Current output: 1.8A (peak max. 3A)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 240kHz
- Conversion efficiency: up to 96%
- Output ripple: 30mV (no-load) - Voltage regulation: ± 2.5%

A high-performance regulator-booster.
24V battery charger - DC / CV method.
Power supply of the laptop from a 12V car battery.
A high-performance dimmer-regulator.
Charger for Li-Ion, Li-Po batteries etc. - CC / CV method.
LED Constant current driver for LED diodes.
Characteristic:
- Input voltage: 6V -40V
- Output voltage: 1.25-35V (adjustable)
- Output current: 8A, (10A maximum)
- Output power: 300W maximum
- Efficiency of Conversion: up to 95%
- Wiring: Solderless terminal
- Operating frequency: 300kHz
- Ambient temperature exceeds 40 ° C, increase heat dissipation
- LED indicator two-color;
- Charge red
- Fully charged light green
- No charge green

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 2600mAh (discharge of 0.2C, 2.75V)
- Minimum capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.63V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1300mA, fast charge: 2600mA
- Charging time: standard charge: 3 hours, fast charge: 2.5 hours
- Max. Charging current: 2600mA (ambient temperature 25 °)
- Max. Discharge current: 5200mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.75V
- Cell weight: 47.0g maximum
- Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max.

A high-performance voltage regulator-riser 12V laptop power supply car accumulator
150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car features:
- Input voltage: 10V-32V
- Output voltage: 12-35V (adjustable)
- Output current: 6A maximum
- Input current: 10A maximum
- Output power: 100W of natural cooling (MAX), plus 150W (MAX) fan
- Conversion efficiency: up to 94% (2.5 A 16V Input Output 19V when measured - only as a reference)
- Wiring: seamless terminal
- Operating temperature: industrial grade (-40 „ƒ to 85 „ƒ) (room temperature exceeds 40 degrees, use of lower power, or add fan)
- Current without load: 25 mA typical

Rechargeable Battery XTAR 18650 2600mAh Li-ion features:
- With PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life
- Quantity: 1 unit

AMS1117 Buck fixed output module 3.3V 800mA features:
- Based on AMS1117-3.3V regulator
- Input Voltage: 4.5 - 12Vdc
- Output Voltage: 3.3 Vdc (+/- 0,05V)
- Max.output current: 800mA
- Operating temperature: -40ºC to + 150ºC
- Dimensions: 25mm x 12mm

Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down features:
- Based on the MP1584EN regulator
- Output Voltage: 1.6V - 26V DC (adjustable)
- Input Voltage: 4.5V - 28V DC
- Max. Output Current: 3A (with heat sink)
- Frequency: 1MHz
- Conversion Efficiency (1A): 94%
- Short circuit protection
- Protection against overheating
- Operating temperature: -40ºC to + 85ºC
- Measures 22 x 17 x 4 mm

Panasonic rechargeable battery NCR18650B 3400mAh Li-ion 3,6V features:
- Nominal capacity: 3350mAh (0.2C, 2.5V discharge)
- Minimum capacity: 3250mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: CC-CV (constant voltage with limited current )
- Charging current: standard charge: 1625mA,
- Charging time: standard charge: 4 hours,
- Max. Discharge current: 6500 mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.5V
- Cell weight: 47.5g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum
- Operating temperature: charge: 0 to 45 ° C, discharge: -20 to 60 ° C

Wide range of voltages, improved version.
Drop module.
They will use a multimeter to Check the output voltage and adjust the potentiometer.
3A DC Converter 4-53V Adjustable LM2596H Step Down Source features:

- Based on the LM2596HVS-ADJ regulator
- Rectification: Asynchronous
- Output Voltage: 3v ~ 40v DC (adjustable)
- Input Voltage: 4.5v - 53v DC
- Max Output Current: 3A (with heat sink)
- Ripple in output voltage: 30mV
- Frequency: 150KHz
- Max Conversion Efficiency: 92%
- Load Regulation: ± 0.5% - Voltage Regulation: ± 2,5%
- Operating temperature: -40ºC to + 85ºC
- Measurements: 43x 21x 14 mm

Descripción:
Chip XL4015 - Upgrade of the LM2596
Drop module
Use a multimeter to check the output voltage and adjust the potentiometer
Voltage control
XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596 features:
- Input voltage: 4.5V-38V
- Output voltage: 1.25-36.5V
- Current output: 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features:
IMPORTANT: This battery does not have a protection circuit.
Use it at your own risk.
Do not charge over 4.2V
Do not discharge below 3V
Do not change polarity
Do not heat the battery, or expose it to high temperatures
Do not wet or expose to environments of High humidity
For long periods of storage it should be stored below 45 ° C
After long periods of storage you will probably need to do some charging cycles to increase the capacity again.
Quantity: 1 unit
Nominal capacity: 2500mAh (0.2C, 2.75V discharge)
Minimum capacity: 2450mAh (0.2C, 2.75V discharge)
Charging voltage: 4.2 ± 0.05 V

Boost converter provides stable performance at 5V output even when operating with two AA batteries:
- With a 1.5V AA battery-output 5V / 200 ~ 300mA
- With two batteries 1.5V AA-output 5V / 500 ~ 600mA
It can be used for power applications and mobile devices to charge phones, cameras that use battery power.
DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module features:
- Input Voltage: 1.5V - 5.0V DC
- Output Voltage: 5V
- Max Output Current: 600mA
- LED operating indicator (input voltage min 2V)
- Protection over short circuit: no
- Measures of PCB 36 x 16

Battery Varta Industrial AA - 4006 LR06 Mignon 1,5V- pack 4unds features:
- 1.5V Varta Industrial LR06 Battery
- High quality, made in Germany
- Quantity: 4 units

Boost converter provides stable performance at 5V output even when operating with two AA batteries:
- Input voltage min 2V-output 5V/ ~ 400mA
- Input voltage min 3V-output 5V/ ~ 800mA
- Input voltage min 3.5V-output 5V/ ~ 1200mA
It can be used for power applications and mobile devices to charge phones, cameras that use battery power.
Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB features:
- Input Voltage: 2V - 5.0V DC
- Output Voltage: 5.1V + / 0.1V
- Max Output Current: 1200mA
- LED operation indicator
- Protection over short circuit: no
- Measures of PCB 26 x 18

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 3450mAh (0.2C, discharge of 2.5V)
- Minimum capacity: 3350mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1675mA,
- Max. Discharge current: 10A (ambient temperature 25 °)
- Charging time: standard charge: 4 hours,
- Discharge cut-off voltage: 2.5V
- Cell weight: 47g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of voltage and current.
DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo features:
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Current output: adjustable, 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 26mm x 14mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

A high-performance step-up regulator
Boost Adjustable Power Converter LM2587 5A DC 4.5-35V features:

- Input voltage: 3.5 ~ 32v
- Output voltage: 4.5 ~ 35v (adjustable)
- Output current: 3A, maximum 5A (heatsink heat is required)
- Conversion efficiency: up to 90%
- Operating frequency: 100KHz
- Short circuit protection: current limiting
- Operating temperature: industrial grade (- 40 to 85)
- PCB dimensions: 52 x 37 mm

3V CR1220 button lithium battery features:
- 3V battery
- Diameter: 12.5mm
- Voltage: 3V
- Capacity: 45mAh
- Quantity: 1 unit

DC Step Down Converter 3.3V 2A 3.4-6V features:
- Voltage drop module
- Input voltage: 3.4-6V
- Output voltage: 3.3V
- Current output: adjustable, max 2A
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 1.5MHz
- Efficiency conversion: up to 95%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 12 x 15 mm
- Full charge output ripple: Vpp <50 mV
- Output accuracy: ± 0.1V
- Current IQ without load: 0.2mA
- Stop current (EN) <10uA

4x everActive R6 / AA 2000 mAh Ni-MH 1.2V rechargeable batteries features:
- Batteries in Blister
- Nominal capacity: 2000mAh
- Minimum capacity: 1900mAh - Nominal voltage: 1.2V
- Cell dimension: Height: 50.50 mm max
- Diameter: 14.50 mm max

- The XL6009 module has a superior performance than the LM2577 module
- The regulator-booster of High performance
Characteristic:
- Based on the XL6009E1 regulator
- Input voltage: 3V-32V,
- Output voltage: 5-35V (adjustable),
- Output current: 2A maximum 3A (heat sink is required)
- Conversion efficiency: up to 94%
- Rectifier: not synchronous rectification
- Short circuit protection: current limitation, since recovery
- Operating temperature: industrial grade (-40 ° C - 85 ° C)
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Size: 50 x 22 x 15 mm

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3500mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3500mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.6A
- recommended maximum discharge current 10A - maximum charging voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

LITHIUM POLYMER BATTERY Battery LIPO 180mAh 3.7V features:
-Battery type-lithium polymer. -Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 180 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit Dimensions: -Length / depth of the battery- 20 mm -Battery width / diameter -31 mm It has three cables with a 3-pin connector with a separation of 2 mm. Wires: Red: positive. Black: negative. Yellow: thermistor output. The technical file: Battery LIPO.pdf

Converter DC USB Step Down 7V-24V to 5V 3A features:
- Voltage reduction module with USB connector
- DIY mobile power supply, to achieve the 5v output to charge the phone, mp3, mp4, psp, etc. can not charge for the ipad
- The USB output converter module has short circuit protection 5A current automatic protection
- Based on the monolithic MP2307 controller
- Rectification: not synchronous
- Input voltage: DC 7v to 24v
- Output voltage: DC 5v
- Output current: 3A (Little time 4A)
- Output connection: USB Type A female connector
- Input connection: Terminal with screws
- Efficiency of transformation: 96%
- Switching frequency: 340KHz
- Output ripple: 30mV (max.)
- Load regulation: ± 0.5%

LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. Breadboard Power Supply Protoboard 830/400 Points MB102 features:
- Input voltage supports up to 12V
- Selectable 3.3V or 5V
- USB input or standard DC 2.1 x5.5mm connector
- Maximum current 700mA
- It fits perfectly on the MB-102 breadboard feeding the two lateral buses
- Weight: 15 gr. (approx.) Compatible only with MB-102 type plates

LITHIUM POLYMER BATTERY Battery LIPO 210mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 210 mAh. - Embedded PCM security chip (protection against overcharging, over discharge, short circuit) Dimensions: -Length / depth of battery- 25mm -Battery width / diameter- 31 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features:

- Based on the LM2596S-ADJ regulator
- Rectification: Asynchronous
- Output Voltage: 1.25v - 32v DC (adjustable)
- Voltage of Input: 3.2v - 35v DC
- Max Output Current: 3A (with heat sink)
- Ripple at output voltage: 30mV
- Frequency: 150KHz
- Max Conversion Efficiency: 92%
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 2.5%
- Operating Temperature: -40ºC to + 85ºC
- Measurements 43x 21x 14 mm

LITHIUM POLYMER BATTERY Battery LIPO 2650mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2650 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 71 mm -Width / diameter of the battery- 95 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

This module is a voltage regulator that creates an output voltage of 5V with a maximum current of 800mA. The integrated regulator is referenced AMS1117.
The module has two two point connectors for quick connection. Converter module AMS1117 Buck fixed output 5V 800mA features:
- Based on the regulator AMS1117-5V
- Input voltage: 4.5-12VDC
- Output voltage: 5VDC (+/- 0.05V)
- Max output current: 800mA
- Operating temperature: -40C to + 150C
- PCB size: 25x12 mm

LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

This power supply delivers an output voltage lower than that of the input and allows power loads up to 10A.
It has its heat sink, it is Recommended to use it for loads up to 8A for optimal cooling.
Includes its foot protection kit, which greatly facilitates heat dissipation and use. 10A DC-DC Converter Adjustable Downstream 8V-40V to 1.25V-36V features:
- Input voltage: DC 8V-40V
- Output voltage: DC 1.25V-36V adjustable with potentiometer (can only be used as a reducing module, the input must be higher than 1.25V output)
- Output current: 8A (Max 10A for a short time), adjustable with potentiometer. Below 5A it can cool naturally
- Output power: Max 150W
- Key components:
- Electrolytic capacitors 470µF - 50V

Specifications: Voltage: 6V
Capacity: 4.5Ah
Dimension
- length: 70mm
- width: 48mm
- height: 100mm
- total height (with terminals): 106mm
Weight: 0.71 kg Gel Battery 6V 4.5Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current:

This Step-down voltage converter includes 5 functions in one module. It can be used as a voltmeter, ammeter and measurements can be recovered through its USB port.
The output voltage and voltage can be adjusted thanks to two potentiometers present in the module.
It has an efficiency Very high, it has a display screen for voltage, current and two buttons to configure what you want to see. Characteristic: - Voltage of input: 5.5 - 36 V
- Output voltage: 1.25-32 V continuously adjustable
- Output current: 4.5 A (Max 5A for a short time) adjustable with potentiometer,
- Power output: 75 W maximum (recommended to use 50 W, large pressure difference, please reduce power)
- Operating temperature: -40 ° C - + 150 ° C

Specifications: Voltage: 6V
Capacity: 3.3Ah
Dimension
- length: 134mm
- width: 34mm
- height: 60mm
- total height (with terminals): 67mm
Weight: 0.69 kg Gel Battery 6V 3.3Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current: - 0 ºC: 85%
- -15 ºC: 62%
Self discharge (25 ºC)
- capacity after 3 months of storage: 91%
- capacity after 6 months storage: 82%
- capacity after 12 months storage: 64%

This module is a 2-channel DC 7-12 VDC power supply for MB102 breadboards.
Each channel has its switch for configure the output voltage to 3.3V or 5V.
Its 3x2 male connectors allow it to be connected to the breadboard in a very simple way without soldering. Micro USB Interface Power Supply DC 7-12 VDC features:
- Operating voltage: DC 7-12 V
- Power display LED
- 1 Jack Female connector 2.1 mm to supply
- 1 AMS1117 3.3V regulator
- 1 AMS1117 5V regulator
- 4 3x2 connectors
- 1 5V micro USB female outlet
- Size: 5.5x3.5x1.5 cm

Specifications: Voltage: 6V Capacity: 1.3Ah Dimension
- length: 96mm - width: 24mm
- height: 51mm
- total height (with terminals): 58mm
Weight: 0.31 kg Gel Battery 6V 1.3Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current: Capacity (25 ºC)
- 20 hour rate: 1.30Ah
- 10 hour rate: 1.24Ah
- 5 hour rate: 1.09Ah
- Rate 1 hour: 0.78Ah
Internal resistance (full charged battery, degree 25 ºC): 36 mOhm
Capacity affected by temperature
- 40 ºC: 102%
- 25 ºC: 100%
- 0 ºC: 85%
- -15 ºC: 62%
Self-discharge (25 ºC)

Lead-acid battery made of AGM (Absorbent Glass Mat). Lead plates and high-quality electrolyte ensure the reliability of the power supply voltages that support most systems, such as UPS and emergency power systems.
Application: Alarm systems Cable television systems Telecommunications equipment Monitoring equipment Protection systems Medical equipment Ups Emergency Power Supply Toys
General Gel Battery 12V 2.3Ah Xtreme features:
Maintenance-free Design prevents leaks Watertight case Explosion safety valve protection High quality and reliability Extremely strong capacity recovery property Low self-discharge characteristics Can be installed in multiple positions

Power supply module step up with fixed output 5 VDC accepting a maximum current of 2A.
Works with frequency signals up to 1.2 MHz.
Characteristic:
- Input voltage range: 2 - 5 VDC,
- Fixed output voltage: 5 VDC,
- Output accuracy: ± 0.1 V,
- Maximum output current: 2A,
- Ripple at full load: Vpp & lt; 70mV,
- Operating temperatures: -40ºC - + 85ºC,
- PCB size: 17x13mm.

The batteries are manufactured on a modern production line. They have a gel-shaped electrolyte, so they are maintenance-free batteries. The batteries are designed to function as both shock absorbers and cyclic. They are characterized by their durability and a very favorable price-performance ratio. Gel Battery 12V 2.3Ah features:
> Long service life - both on the job and on the cyclic damper. No delamination effect of gelled electrolyte. Tolerates high operating temperatures. Fully returns to initial deep discharge volume. Very high performance. Capacity (Ah): 2,3 Nominal voltage (V): 12 LxAnxAl dimensions (mm): 177x33x60 Gross weight: 0.96

Overhead power supply module with fixed 12 VDC output accepting a maximum current of 2A.
Works with frequency signals up to 1.2 MHz.
Characteristic:
- Input voltage range: 2 - 12 VDC,
- Fixed output voltage: 12 VDC,
- Output accuracy: ± 0.1 V,
- Maximum output current: 2A,
- Ripple at full load: Vpp & lt; 70mV,
- Operating temperatures: -40ºC - + 85ºC,
- PCB size: 17x13mm.

Step-up power supply module with fixed 9 VDC output accepting a maximum current of 400mA.
Controlling the logic level of the signal sent on the EN pin, a module can be turned on / off.
Works with frequency signals up to 1.5 MHz.
Characteristic:
- Input voltage range: 2.5 - 7 VDC,
- Fixed output voltage: 9 VDC,
- On / off mode pin EN: signal EN allowing this function to be performed,
- Output accuracy: ± 0.1 V,
- Output current: 150 - 400 mA,
- No-load current: 0.2 mA, - Ripple at full load: Vpp & lt; 70mV,
- DC-DC conversion quality: 89%
- Operating temperatures: -40ºC - + 85ºC,
- PCB size: 19x15 mm.

The batteries are manufactured on a modern production line. They have a gel-shaped electrolyte, so they are maintenance-free batteries. They are characterized by their durability and a very favorable value for money. Gel Battery 12V 0.8Ah features:
Long service life-both on the job and on the cyclic damper. No delamination effect of gelled electrolyte. Tolerates high operating temperatures. Fully returns to initial deep discharge volume. Very high performance. Capacity (Ah): 0.8 Tensi Nominal ion (V): 12 LxAnxAl dimensions (mm): 96x28x61 Gross weight (kg): 0.32

Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use features:

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3000mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3000mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.5A
- recommended maximum discharge current 4.5A
- maximum charge voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

Lithium polymer battery 3.7 V with the capacity of 590 mAh. Includes PCM safety chip (protection against overcharge, over-discharge, short circuit).

Battery terminal type-3 wires.

Battery voltage-3.7 V

Battery capacity- 590 mAh.

The ADS1115 is an external 16-bit ADC + a built-in programmable gain amplifier (or PGA), which can be very useful for certain Arduino and ESP8266 projects. This is ideal when more resolution or more analogue pins are required. You get better accuracy, as well as relieving the processor of this burden.

Gel Battery 12V 7Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Gel Battery 6V 4Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Gel Battery 12V 1.2Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge