16-bit I2C ADS1115 module, 4-channel ADC with professional gain amplifier PGA

This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The  board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board.

This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin.

Ideal for connecting TTL RS232 devices to your PC through the USB port. PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin features:
- Compatible controller PL2303HXA
- 4 pins: 5.0V (red), TxR (green), RxD (white), GND (black)
- 2.5A self-recovery protective fuse
- Supported OS: Win8, Win10, WinME, Win2003, Win XP, Vista, Win 7 The 64-bit Prolific drivers provided by Microsoft through Windows Update will not work with most adapters and will therefore generate the generic "Code 10" error.

This is a CH340G TTL UART 5V serial adapter, designed to allow adding a USB connection to your project.
In addition, this opens up the possibility of programming microcontrollers like the Arduino Pro mini.
This module allows you to connect your project, from programming small microcontrollers to a custom computer keyboard.
The module is ready for use of a UART connection.
This may require the installation of a driver; however, it is a standard driver distributed by Microsoft Windows Update, available in Linux and that can be configured in MAC OS.
Adapter module CH340G LC Technology -TTL UART 5V series features:
- Manufacturer: LC Technology,
- Communication chipset: CH340G
- Communication: UART,
- Pin connection:

This converter has internal DC/DC power supply and full isolation between USB and RS485 output and enables to establish reliable and secure communication. It adopts the original FT232RNL and SP485EEN chip solution, provides stable communication with built-in galvanic isolation, lightning protection and anti-electrostatic protection, etc., it is an ideal choice for industrial control equipment and/or applications with high communication requirements.

3.3V/5V I2C logic level converter module with soldering pins.
Ideal to connect a device that works at 3.3V to one that works with 5V.
It works with digital signals (high and low levels).
Logic Level Converter 3.3 / 5V I2C IIC features:
- Voltage: 3.3V/5V
- Measures: 1.5x 1 cm

Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features:
- Controller CP2102
- 5 pins: 3.3v, 5.0v, TxR, RxD, GND
- Standard USB type to male and 5 pin TTL connector
- 3 Status LEDs: Power, RX and TX
- USB 2.0 specification with 12Mbps maximum speed

TTL level conversion module 5V 3.3V IO Single Interchange Compatible I2C SPI.
Use of high-speed dual-level IT supply level translator chip design. TTL Level Converter 5V - 3.3V IO LJ245A features:
- Main chip: Octal bus transceiver and change from 3.3-V to 5-V with outputs of 3 states LJ245A of Texas Instrument
- VCCA power supply voltage: 4.5 - 5.5 VDC
- VCCB power supply voltage: 2.7 - 3.6 VDC
- Low level input voltage V (IL): 0.8 V
- High-level input voltage V (IH): 2 V
- Low level output current I (OL): 12 - 24 mA
- High level output current I (OH): -24 - -12 mA
- 8 channels allow the conversion of the IO communication level
- Channel levels A and B are controlled by VCCA and VCCB

Connecting a 3.3V device to a 5V system is a challenge.
The bidirectional logic level converter is a small device that safely drops the signals from 5V to 3.3V and increases 3.3V to 5V at the same time.
This level converter also works with 2.8V and 1.8V devices. What really separates this logic level converter from our previous versions is that it can successfully set its high and low voltages and go up and down between them safely on the same channel.
Each level converter has the ability to convert 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two sources of voltage (high voltage and low voltage) that your system is using.

Standard ISP download port, for on-line programming. Built-in crystal oscillator circuit (8MHz), crystal are replaceable. Has reset push button, power reset push button. 

A standard IEEE1284 DB25 parallel port to your PC via the USB port. Transmission speed reaches 12 Mbps. This cable is "USB Printing Support" port and not Parallel "LPT Printer Port"