MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features: - Booster module - The output voltage may be greater than the input voltage - Use a multimeter to check the output voltage and adjust the potentiometer - Input voltage: 2-24V - Output voltage: 5-28V - Current output: 2A - Operating temperature: -40ºC to + 85ºC - Conversion efficiency: up to 93% - Size: 17.5 x 30 mm Code A0065 Available Price €1.40
Power Supply Transformer 220V AC/DC 2A 12V Power Supply Transformer 220V AC/DC 2A 12V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 12V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0015 Available Price €3.96
6V 2W Solar Panel Do-it-yourself Mobile Photovoltaic Charger Cell Suitable for a small solar power system, etc. 6V 2W Solar Panel Do-it-yourself Mobile Photovoltaic Charger Cell features: - Working voltage: 6V - Output power: 2W - Product size: 136x 110x 3 mm Applications: - Charge cell phones - Home lighting - DIY solar powered toys Code A0071 Available Price €4.92
2x MOC3020 Optocoupler 400V 2x MOC3020 Optocoupler 400V features:-Triac Driver Output Optoisolator-Pack: DIL 6-Electronic voltage forward: 1.15V-Trigger LED current: 30mA-Voltage isolation: 5,300 VAC RMS-Maximum blocking voltage: 400V-Temperature of operation: -40°C a + 85°C Code T0013 Available Price €0.66
DS18B20 Digital Temperature Sensor Probe 5m Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 5m. DS18B20 Digital Temperature Sensor Probe 5m features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Vcc red - Yellow digital output- Inocidable steel- Cable length: 5m Code S0134 Available Price €6.57
Hall Effect Sensor Module KY-003 with SH3144E TO-92 This module adapted for the arduino is a unipolar Ic Hall effect magnetic sensor. The Hall effect is when a current passes through a bar of semiconductor (or conductive) material, and if an induction magnetic field B is applied perpendicular to the direction of current flow, a voltage, called Hall voltage, proportional to the magnetic field, and the current appears on the faces sides of the bar. This tension is proportional to the displacement speed of the charge carriers, which is considerably higher in semiconductor materials than in metal conductors. Hall Effect Sensor Module KY-003 with SH3144E TO-92 features: - 3-pin connector: 1- GND 2- VCC 3- Voltage is recovered depending on the magnetic effect - Supply voltage: 5VDC - Output current: 40mA Code M0131 Available Price €1.40
W5500 Lite - Ethernet Network Modules SPI The WIZ850io is a compact sized network module (Ethernet module) for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the WIZNET Ethernet-based local network and internet with a TCP/IP interface. Compatible with libraries with the same Ethernet API. With this module with RJ-45 port you can build a web server. It can be used as a server or as a client. Code W0107 Available Price €8.26
16GB Class 10 MicroSD memory card with adapter 16GB Class 10 MicroSD memory card with adapter features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0019 Backorder Price €4.09
XL6009 DC-DC Step-Up Booster Controller LM2577 - The XL6009 module has a superior performance than the LM2577 module - The regulator-booster of High performance Characteristic: - Based on the XL6009E1 regulator - Input voltage: 3V-32V, - Output voltage: 5-35V (adjustable), - Output current: 2A maximum 3A (heat sink is required) - Conversion efficiency: up to 94% - Rectifier: not synchronous rectification - Short circuit protection: current limitation, since recovery - Operating temperature: industrial grade (-40 ° C - 85 ° C) - Load regulation: ± 0.5% - Voltage regulation: ± 0.5% - Size: 50 x 22 x 15 mm Code A0005 Available Price €2.02
Boost Adjustable Power Converter LM2587 5A DC 4.5-35V A high-performance step-up regulator Boost Adjustable Power Converter LM2587 5A DC 4.5-35V features: - Input voltage: 3.5 ~ 32v - Output voltage: 4.5 ~ 35v (adjustable) - Output current: 3A, maximum 5A (heatsink heat is required) - Conversion efficiency: up to 90% - Operating frequency: 100KHz - Short circuit protection: current limiting - Operating temperature: industrial grade (- 40 to 85) - PCB dimensions: 52 x 37 mm Code A0019 Available Price €5.78
MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features: - Booster module - The output voltage may be greater than the input voltage - Use a multimeter to check the output voltage and adjust the potentiometer - Input voltage: 2-24V - Output voltage: 5-28V - Current output: 2A - Operating temperature: -40ºC to + 85ºC - Conversion efficiency: up to 93% - Size: 17.5 x 30 mm Code A0065 Available Price €1.40
DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module Boost converter provides stable performance at 5V output even when operating with two AA batteries:- With a 1.5V AA battery-output 5V / 200 ~ 300mA- With two batteries 1.5V AA-output 5V / 500 ~ 600mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module features:- Input Voltage: 1.5V - 5.0V DC- Output Voltage: 5V- Max Output Current: 600mA- LED operating indicator (input voltage min 2V)- Protection over short circuit: no- Measures of PCB 36 x 16 Code A0001 Available Price €1.53
LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up features: - Step-up stepper adjustable module. - Output voltage may be greater than the input - Use a multimeter to check the output voltage and adjust the potentiometer - Chip LM2577S-ADJ - Input voltage: 3.5V -35V - Output voltage: 4-35V - Current output: 2A, max. 3A with heat sink - Power max. 20W - Operating temperature: -40 to + 85 ºC - Conversion efficiency: up to 92% - Size: 44 x 30 mm Code A0066 Available Price €3.21
150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car A high-performance voltage regulator-riser 12V laptop power supply car accumulator150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car features:- Input voltage: 10V-32V- Output voltage: 12-35V (adjustable)- Output current: 6A maximum- Input current: 10A maximum- Output power: 100W of natural cooling (MAX), plus 150W (MAX) fan- Conversion efficiency: up to 94% (2.5 A 16V Input Output 19V when measured - only as a reference)- Wiring: seamless terminal- Operating temperature: industrial grade (-40 „ƒ to 85 „ƒ) (room temperature exceeds 40 degrees, use of lower power, or add fan)- Current without load: 25 mA typical Code A0006 Available Price €4.12
12 V supply module with 2A step-up output on/off DM13 Overhead power supply module with fixed 12 VDC output accepting a maximum current of 2A. Works with frequency signals up to 1.2 MHz. Characteristic: - Input voltage range: 2 - 12 VDC, - Fixed output voltage: 12 VDC, - Output accuracy: ± 0.1 V, - Maximum output current: 2A, - Ripple at full load: Vpp & lt; 70mV, - Operating temperatures: -40ºC - + 85ºC, - PCB size: 17x13mm. Code A0093 Available Price €3.22
600W Boost Converter Booster Module DC voltage 12V to 80V 600W Boost Converter Booster Module DC voltage 12V to 80V features: - Input voltage: 10V-60V - Output voltage: 12-80V (adjustable) - Output current: 10A - Input current: 15A maximum - Output power: 600W maximum - Conversion efficiency: up to 95% (input 30V, output 40V 5A 93%) - Wiring: solderless terminal - The minimum difference between the output and input voltage: 2V - The ambient temperature exceeds 40 ° C, increase the dissipation of heat - Short circuit protection: If between reverse polarity protection: None - Size: 85 x 63 x 64 mm - Weight 275g Applications: Code A0009 Available Regular price €11.98 -€1.50 Price €10.48
DC Boost Step-Up Module 1.5-4.2V to 5V DC to DC Step-up converter 1.5-4.2V to 5V. Operates with a maximum output current of 500mA. Code A0096 Available Price €1.89
Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB Boost converter provides stable performance at 5V output even when operating with two AA batteries:- Input voltage min 2V-output 5V/ ~ 400mA- Input voltage min 3V-output 5V/ ~ 800mA- Input voltage min 3.5V-output 5V/ ~ 1200mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB features:- Input Voltage: 2V - 5.0V DC- Output Voltage: 5.1V + / 0.1V- Max Output Current: 1200mA- LED operation indicator- Protection over short circuit: no- Measures of PCB 26 x 18 Code A0002 Available Price €1.82
XL6009 DC-DC Step-Up Booster Controller LM2577 - The XL6009 module has a superior performance than the LM2577 module - The regulator-booster of High performance Characteristic: - Based on the XL6009E1 regulator - Input voltage: 3V-32V, - Output voltage: 5-35V (adjustable), - Output current: 2A maximum 3A (heat sink is required) - Conversion efficiency: up to 94% - Rectifier: not synchronous rectification - Short circuit protection: current limitation, since recovery - Operating temperature: industrial grade (-40 ° C - 85 ° C) - Load regulation: ± 0.5% - Voltage regulation: ± 0.5% - Size: 50 x 22 x 15 mm Code A0005 Available Price €2.02
Boost Adjustable Power Converter LM2587 5A DC 4.5-35V A high-performance step-up regulator Boost Adjustable Power Converter LM2587 5A DC 4.5-35V features: - Input voltage: 3.5 ~ 32v - Output voltage: 4.5 ~ 35v (adjustable) - Output current: 3A, maximum 5A (heatsink heat is required) - Conversion efficiency: up to 90% - Operating frequency: 100KHz - Short circuit protection: current limiting - Operating temperature: industrial grade (- 40 to 85) - PCB dimensions: 52 x 37 mm Code A0019 Available Price €5.78
MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features: - Booster module - The output voltage may be greater than the input voltage - Use a multimeter to check the output voltage and adjust the potentiometer - Input voltage: 2-24V - Output voltage: 5-28V - Current output: 2A - Operating temperature: -40ºC to + 85ºC - Conversion efficiency: up to 93% - Size: 17.5 x 30 mm Code A0065 Available Price €1.40
DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module Boost converter provides stable performance at 5V output even when operating with two AA batteries:- With a 1.5V AA battery-output 5V / 200 ~ 300mA- With two batteries 1.5V AA-output 5V / 500 ~ 600mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module features:- Input Voltage: 1.5V - 5.0V DC- Output Voltage: 5V- Max Output Current: 600mA- LED operating indicator (input voltage min 2V)- Protection over short circuit: no- Measures of PCB 36 x 16 Code A0001 Available Price €1.53
LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up features: - Step-up stepper adjustable module. - Output voltage may be greater than the input - Use a multimeter to check the output voltage and adjust the potentiometer - Chip LM2577S-ADJ - Input voltage: 3.5V -35V - Output voltage: 4-35V - Current output: 2A, max. 3A with heat sink - Power max. 20W - Operating temperature: -40 to + 85 ºC - Conversion efficiency: up to 92% - Size: 44 x 30 mm Code A0066 Available Price €3.21
150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car A high-performance voltage regulator-riser 12V laptop power supply car accumulator150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car features:- Input voltage: 10V-32V- Output voltage: 12-35V (adjustable)- Output current: 6A maximum- Input current: 10A maximum- Output power: 100W of natural cooling (MAX), plus 150W (MAX) fan- Conversion efficiency: up to 94% (2.5 A 16V Input Output 19V when measured - only as a reference)- Wiring: seamless terminal- Operating temperature: industrial grade (-40 „ƒ to 85 „ƒ) (room temperature exceeds 40 degrees, use of lower power, or add fan)- Current without load: 25 mA typical Code A0006 Available Price €4.12
12 V supply module with 2A step-up output on/off DM13 Overhead power supply module with fixed 12 VDC output accepting a maximum current of 2A. Works with frequency signals up to 1.2 MHz. Characteristic: - Input voltage range: 2 - 12 VDC, - Fixed output voltage: 12 VDC, - Output accuracy: ± 0.1 V, - Maximum output current: 2A, - Ripple at full load: Vpp & lt; 70mV, - Operating temperatures: -40ºC - + 85ºC, - PCB size: 17x13mm. Code A0093 Available Price €3.22
600W Boost Converter Booster Module DC voltage 12V to 80V 600W Boost Converter Booster Module DC voltage 12V to 80V features: - Input voltage: 10V-60V - Output voltage: 12-80V (adjustable) - Output current: 10A - Input current: 15A maximum - Output power: 600W maximum - Conversion efficiency: up to 95% (input 30V, output 40V 5A 93%) - Wiring: solderless terminal - The minimum difference between the output and input voltage: 2V - The ambient temperature exceeds 40 ° C, increase the dissipation of heat - Short circuit protection: If between reverse polarity protection: None - Size: 85 x 63 x 64 mm - Weight 275g Applications: Code A0009 Available Regular price €11.98 -€1.50 Price €10.48
DC Boost Step-Up Module 1.5-4.2V to 5V DC to DC Step-up converter 1.5-4.2V to 5V. Operates with a maximum output current of 500mA. Code A0096 Available Price €1.89
Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB Boost converter provides stable performance at 5V output even when operating with two AA batteries:- Input voltage min 2V-output 5V/ ~ 400mA- Input voltage min 3V-output 5V/ ~ 800mA- Input voltage min 3.5V-output 5V/ ~ 1200mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB features:- Input Voltage: 2V - 5.0V DC- Output Voltage: 5.1V + / 0.1V- Max Output Current: 1200mA- LED operation indicator- Protection over short circuit: no- Measures of PCB 26 x 18 Code A0002 Available Price €1.82