Components and sensors

LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD features:
- LCD screen TFT 240x320 pixels
- Power 2.8-3.3V
- 262,000 possible colors (18 bit)
- 8/16 bit parallel bus digital interface
- LCD Controller: ILI9325
- Touch screen controller: XPT2046
- Touchscreen, resistive touch screen
- Manual use or with any type of pointer
- SD card reader
- Connector: 2 x 20 pins 2.54mm
- Dimensions PCB 75x55 mm
- Dimensions LCD 59x42 mm
- Ideal for projects with ARDUINO Uno Mega, AVR, STM

LCD display consists of a 16-character, 2-rows.
The display is compatible with the HD44780 controller
Ideal for projects with Arduino
You can use it with PIC, AVR, STM32 and many more controllers.

LCD TFT Display Module 240x320 2.4 SPI features:
- LCD screen TFT 240x320 pixels
- 262,000 possible colors (18 bit)
- Pixel: RGB vertical band
- Driver ILI9341
- SPI interface
- 8-bit digital interface, 4-bit control lines
- Resistive touch screen 4 - cables
- Ideal for projects with ARDUINO, Uno R3, MEGA2560
Helpful Links:
Wiring of the TFT LCD screen 2.4 SPI
- Connect the TFT 2.4 SPI LCD screen with the UNO module
Display graphics and texts on the LCD TFT screen 2.4 SPI
Program a touch calculator on the LCD screen TFT 2.4 SPI

5x Push Switch Button B3F Omron Red Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

It works exactly the same and with the same libraries as an LCD1602.
It consists of a display of 20 characters and 4 rows.
Ideal for projects with Arduino.
You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 20x4 2004 features:
- LCD screen, 20 characters and 4 lines
- 5V power
- Backlit blue background, white letters

5x Push Switch Button B3F Omron Blue Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

5x Pushbutton B3F Green Key Omron Electronica Arduino Prototype Switch 12 features:
- 5x Pushbuttons B3F Omron
- 5x Keys
- Maximum current: 50mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals - Weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

The display is compatible with the PCD8544 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32 . Characteristic: - LCD screen, 48x84 pixels
- Vcc supply 2.7-3.3V
- Voltage LED backlight 2.7-3.2V
- Compatible PCD8544 controller
- SPI interface
- PCB dimensions (mm): 45x45
- Includes solder pins
- The screen may have small stripes

Momentary Pushbutton Switch N/A NO 2A 36V 16mm Stainless Steel features:
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 36VDC
- Type of terminal: Screw
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C

- It consists of a display of 16 characters and 2 rows
- The display is compatible with the HD44780 controller
- Ideal for projects with ARDUINO
- You can use it with PIC, AVR, STM32 PCF8574 -> the default address 0x20
PCF8574A -> the default address 0x3F
- It can be changed to any between 0x20 and 0x27 depending on whether you have soldiers or not pins A0 A1 A2 Screen LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features:
  
- LCD screen, 16 characters and 2 lines
- 5V power
- HD44780 compatible controller
- Backlit blue background, white letters
- Include an adjustable contrast pin
- Dimensions (mm): 80 x 36 x 12 Adapter LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features:

Latching Metal Switch 16mm Stainless Steel features:
- For panel N/A NO 2A 36V Stainless Steel On/Off
- Type of operation: On/Off
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A/36VDC
- Type of terminal: Screw
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C

- It consists of a 20-character, 4-row display
- The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem
- Only two pins are needed for communication, SDA and SCL
- Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32
PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F
- It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2
20x4 2004 LCD display PCF8574T I2C Backlit Blue features:

- LCD screen, 20 characters and 4 lines
- 5V power supply
- HD44780 compatible controller

12V Push Button LED Red 16mm features:
- Momentaneo panel N/A NO with return 2A Steel
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C

- It consists of a screen of 20 characters and 4 rows
- Ideal for projects with ARDUINO
- You can use it with PIC, AVR, STM32 LCD Display Screen Green 20x4 2004 features:
- LCD screen, 20 characters and 4 lines
- 5V power
- Retro green background illuminated, black letters

TFT LCD 34pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:
- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board
- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.
- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32
- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.
- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen.

12V Push Button LED Green 16mm features:
- Momentaneo panel N/A NO with return 2A Steel
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C

12V Momentary LED Push Button Switch White 16mm N/A NO features:
- Type of operation: Momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C+

It is made up of a 16-character, 2-row, 6-button display.
The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library.
Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features:
>
- 2x16 LCD with blue backlight and white characters
- Potentiometer to modify the LCD contrast
- 5-push-button keyboard + RESET
- Use of the minimum possible channels
- Full compatibility with Arduino UNO and Mega
- The display is compatible with the HD44780 controller
- Response time: 30 ms
- Size: 80 x 60 x 22 mm

12V Momentary LED Pushbutton Blue 16mm N/A NO features:
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Blue

IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features:
- Based on the PCF8574A chip
- Power: 5V
- Supports I2C Protocol
- A potentiometer for regulate contrast
- Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL
- Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32

24V Momentary LED Pushbutton Blue 16mm N/A NO features:
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 24VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C

- Tipo de operación: momentáneo (retorno automático)
- Interruptor de contacto: 1 NA (normalmente abierto)
- Max Interruptor Clasificación: 2A / 12VDC
- Material del cuerpo: Acero inoxidable
- Botón Material: Acero inoxidable
- Protección Clasificación: IP67 / IK08
- Temperatura de funcionamiento:
- 20C +55C
- Color : Azul

It consists of a display of 16 characters and 4 rows.
Ideal for projects with Arduino.
You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 16x4 1604 features:
- LCD screen, 16 characters and 4 lines
- 5V power
- Backlit blue background, white letters
- Include an adjustable contrast pin

12V Momentary LED Pushbutton Green 16mm N/A NO features:
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Green

Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features:
- Oled 0.96 "screen with 128 * 64 pixels
- Drive IC model SDD1306
- Power: 3V-5.5V - Viewing angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption: 0.08W
- Operating temperature: -20 to 70 ºC
- PCB board dimension: 27 x 27mm
- Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
- OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc.

12V Momentary LED Pushbutton Red 16mm N/A NO features:
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Red

LCD TFT Shield Adapter 2.4" Touch 3V Expansion Board R3 features:
- Shield LCD TFT 2.4 "Touch 3V expansion board for Uno R3
- Facilitates connections between the TFT LCD 2.4 "Touch 3V with SD card reader and the Arduino UNO board
- Put the screen on the shield and you can connect it directly to the Arduino UNO
- UNO R3 2.4 "TFT LCD shield TFT LCD PCB Adapter for Arduino UNO STM32
- The TFT01 LCD screen operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top
- The TFT LCD PCB adapter for UNO is compatible with the Arduino pins, the user can plug directly the TFT LCD PCB adapter into the shield and placed on the Arduino board. - Can be used with a UNO and LCD screen

Characteristic:
- For panel N / A NO 2A 36V Stainless Steel on / off
- Type of operation: On / Off
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Blue

It consists of a 16-character, 2-row display.
The display is compatible with the HD44780 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features:
- LCD screen , 16 characters and 2 lines
- 5V power supply
- HD44780 compatible controller
- Backlit blue background, white letters
- Include an adjustable contrast pin
- Dimensions (mm): 80 x 36 x 12

Latching push-button 12V normally open
- For panel N / A NO 2A 36V Stainless Steel on / off
- Type of operation: On / Off
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Red

Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:
- Graphic LCD Screen 128x64 points
- 5V power
- Blue retro background illuminated, white letters
- Controller ST7920
- Parallel / serial communication
- Dimensions PCB 93x70mm

Characteristic:
- For panel N / A NO 2A 36V Stainless Steel on / off
- Type of operation: On / Off
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Green

Screen OLED 1.3" B Blue 128x64 SPI/I2C features:
- Oled 1.3 "128 * 64 pixel display
- Drive IC model SH1106
- Power: 3V-5.5V - Viewing angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption 0.08W
- Use temperature: -20 to 70 ºC
- PCB board dimensions: 40 x 37mm
OLED technology offers high contrast, significantly improves screen black and energy efficiency - very low power consumption. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc.

Momentary LED Pushbutton Blue 22mm N/A NO features:
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC-24VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Blue

Screen OLED 1.3" A Blue 128x64 SPI/I2C features:
- Oled 1.3 "128 * 64 pixel screen
- Drive IC model SH1106
- Power: 3V-5.5V - Viewing angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption 0.08W
- Use temperature: -20 to 70 ºC
- PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption

Push button 6x6x4mm features:
-Touch Push Tact Switch mini electronic Arduino push button
-Measures: 6x6x45mm
-Quantity: 1 unit

Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C features:
- Oled 0.96 "Display of 128 * 64 pixels
- one yellow line and 3 blue lines
- Drive IC model SDD1306
- Power supply: 3V-5.5V
- View angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption 0.08W
- Temperature usage: -20 to 70 ºC
- PCB board dimension: 32 x 32 mm
- OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption energy.
Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc.

Push button 6x6x4mm features:
-Touch Push Tact Switch mini electronic Arduino push button
-Measures: 6x6x4.3mm

Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C features:
- Oled 0.96 "128 * 64 pixel display
- One yellow line and 3 blue lines
- Drive IC model SDD1306
- Power supply: 3V-5.5V
- View angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption 0.08W
- Temperature usage: -20 to 70 ºC
- PCB board dimension: 32 x 32 mm
- OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption of energy.

10x Tactile Tact Push Button Switch 6x6x8mm features:

- Tactile Push Tact Switch mini electronic Arduino pushbutton
- Measures: 6x6x8mm
- Quantity: 10 units

LED 10-Segment Bar Graphics Display Red features:
- Bargraph LED display
- Number of segments: 10
- Size: 5mm - Dimensions: 25x10mm
- Material GaAsP / GaP
- Color: red
- Wavelength: 635 nm
- Vf / forward /2.1 V
- I fw / forward / 30 mA
- Iv / Ifw = 20mA / 4 mcd
- Number of terminals: 20

It consists of a 16-character, 2-row display.
The display is compatible with the HD44780 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply
- HD44780 compatible controller
- Backlit blue background, black letters
- Include an adjustable contrast pin
- Dimensions (mm): 80 x 36 x 12

10x Push button 6x6x9mm features:
-Touch Push Tact Switch mini electronic Arduino push button
-Measures: 6x6x9mm
-Quantity: 10 units

1.44 inch TFT LCD screen 128x128 SPI features:
- TFT LCD screen 128x128 pixels
- 4-wire SPI interface (A0, SDA, SCK, CS)
- Size: 1.44 inches
- Interface: SPI
- Resolution: 128 * 128
- Visual area: 1: 1 square
- Color screen TFT, the effect is much better than other small CSTN displays
- Disk drive: ST7735
- Fully compatible and alternative 5110 interface
- Onboard LDO, 5V / 3.3 input voltage support V
- Screen dimensions: 30 x 28 mm
- PCB dimensions: 45 x 32 mm

Switch Button 8x8mm on-off features:
- Switch terminals: Weldable
- Measures: 8x8x13mm

LCD TFT Touch Screen Display 3.2inch 320x240, shield 34 pins.

Limit Switch with Wheel - 5A 250 Vac - 1 switched - Arduino features:
-Micro KW12-3 on / off switch
-Max Current: 5A -AC voltage: 125-250V
-Operating temperature: -40 to 70 degrees C
-Quantity: 2 units

- Pantalla LCD TFT 240x320 pixels
- 262.000 posibles colores (18 bit)
- Pixel: RGB vertical stripe
- Controlador ILI9341
- Interface SPI
- 8 bit interfaz digital, 4 bit líneas de control
- Pantalla táctil resistiva 4
- wires
- Ideal para proyectos con ARDUINO, Uno R3, MEGA2560 Enlaces útiles : Cableado de la pantalla LCD TFT 2.4 SPI
- Conectar la pantalla LCD TFT 2.4 SPI con el módulo UNO Visualizar gráficos y textos en la pantalla LCD TFT 2.4 SPI Programar una calculadora táctil en la pantalla LCD TFT 2.4 SPI

It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features:
- Interface: I2C (logical level 3.3V)
- Resolution: 128 x 64
- Angle of view: & gt; 160 degree
- Screen color: blue
- Screen Dimension: 2.43cm / 0.96 "
- IC Controller: SSD1306
- Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70
- Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 "

This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.
It works with very low current consumption.
The segments of this screen are connected with a common anode point.
LED Display 1-Digit 7-Segment Red Common Anode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Digit numbers: 1
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C

Rocker Switch 3A 250V On/Off SPST features:
- AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch
- Rocker switch; Type: On/Off (SPST)
- Control on and off SPST and 2 terminals
- Voltage and Current: AC250V, 3A
- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)
- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)
- Black

LED Display 1-Digit 7-Segment Red Common Cathode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 1
- Segment numbers by digit: 7
- Operating temperature: -25 ° C - + 85 ° C
- Storage temperature: -30 ° C - + 85 ° C
- Screen with common cathode connection
- Screen size: 12.6x19x8 mm
- This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.

Rocker switch 6A 250VAC / 10A 125VAC ON / OFF 4 pins DPST Double NO contact

LED Display 2-Digit 7-Segment Red Common Anode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 2
- Segment numbers by digit: 7
- Operating temperature: -25 ° C - + 85 ° C
- Storage temperature: -30 ° C - + 85 ° C
- Screen with common anode connection
- Screen size: 25x19x8 mm
- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:.

Limit Switch with Lever 

LED Display 2-Digit 7-Segment Red Common Cathode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 2
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C
- Storage temperature: -30°C - + 85°C
- Screen with common cathode connection
- Screen size: 25x19x8 mm
- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:.

LED Display 3-Digit 7-Segment Red Common Anode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 12
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 3
- Segment numbers by digit: 7
- Operating temperature: -25 ° C - + 85 ° C
- Storage temperature: -30 ° C - + 85 ° C
- Screen with common anode connection
- Screen size: 37.6x19x8 mm
- This product is a 3-digit screen composed of 7 red LED segments with excellent brightness and features:.

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features:
- Type: 3P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 2P2T 50V 0.5A features:
- Type: 2P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"

LED Display 3-Digit 7-Segment Red Common Cathode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 12
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 3
- Segment numbers by digit: 7
- Operating temperature: -25 ° C - + 85 ° C
- Storage temperature: -30 ° C - + 85 ° C
- Screen with common cathode connection
- Screen size: 37.6x19x8 mm
- This product is a 3-digit screen composed of 7 red LED segments with excellent brightness and features:.