12V Pulsador LED Azul 16mm Momentaneo Panel N/A NO
  • 12V Pulsador LED Azul 16mm Momentaneo Panel N/A NO
  • 12V Pulsador LED Azul 16mm Momentaneo Panel N/A NO
  • 12V Pulsador LED Azul 16mm Momentaneo Panel N/A NO
  • 12V Pulsador LED Azul 16mm Momentaneo Panel N/A NO

12V Pulsador LED Azul 16mm Momentaneo Panel N/A NO

K0189

- Tipo de operación: momentáneo (retorno automático)
- Interruptor de contacto: 1 NA (normalmente abierto)
- Max Interruptor Clasificación: 2A / 12VDC
- Material del cuerpo: Acero inoxidable
- Botón Material: Acero inoxidable
- Protección Clasificación: IP67 / IK08
- Temperatura de funcionamiento:
- 20C +55C
- Color : Azul

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules



Característica:



- Tipo de operación: momentáneo (retorno automático)
- Interruptor de contacto: 1 NA (normalmente abierto)
- Max Interruptor Clasificación: 2A / 12VDC
- Material del cuerpo: Acero inoxidable
- Botón Material: Acero inoxidable
- Protección Clasificación: IP67 / IK08
- Temperatura de funcionamiento:
- 20C +55C
- Color : Azul

Customers who bought this product also bought

2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220

2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 features:
- Type Output: fixed
- Voltage Output: 3.3V
- Manufacturer: Texas Ins
- Output Current: 800mA
- Max input voltage: 20V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- Quantity: 2 units

T0012

Price €1.15

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL004

Regular price €3.15 -€0.50 Price €2.65

LED 5mm RGB 4 Pin Common Anode Tricolor

LED 5mm RGB 4 Pin Common Anode Tricolor features:
- Lens color: clear water
- Size: 5 mm
- Operating current: 20mA
- Voltage (red 620-625nm) 1.9V-2.3V
- Voltage (green 515-520nm) 2.9V-3.2V
- Voltage (blue 460-465nm) 2.9V-3.2V
- Operating temperature: -25ºC + 80ºC
- Welding temperature: + 260ºC
- Quantity: 1 unit

P0089

Price €0.21

ESP-12F ESP8266 12F WiFi Board Module

- WIFI module based on the ESP8266 controller
- ESP8266-12F is an improved version of ESP8266-12E
- It works as a standard WiFi 802.11 b / g / n 2.4 GHz. It is equipped with 22 outputs (pitch 2 mm) of which 11 are GPIO, ADC 1 and SPI. A LED and a PCB antenna have been incorporated
ESP-12F ESP8266 12F WiFi Board Module features:
- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP Stack.
- PLL, regulators and integrated energy management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low energy mode: <10 uA
- Integrated 32-bit processor

W0064

Price €3.09

Relay Module DC 12V 10A 1 Channel Low/High Trigger

Relay Module DC 12V 10A 1 Channel Low/High Trigger features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)

RL003

Price €2.29
€5.89

4,87 tax excl.

Tax included 1
10 items
Price €5.89

Order until 4pm we will send today
30 days return