Microcontroller ATMEGA328P-PU DIP-28 Microcontroller ATMEGA328P-PU DIP-28 features:- Series: AVR® ATmega- Core Processor: AVR- Package / Case: 28-DIP (0.300 ", 7.62mm)- Core Size: 8-Bit- Speed: 20MHz- Connectivity: I²C, SPI, UART / USART- Peripherals Brown-out: Detect / Reset, POR, PWM, WDT- Number of I/O: 23- Program Memory Size: 32KB (16K x 16)- Program Memory Type: FLASH- EEPROM Size: 1K x 8- RAM Size: 2K x 8- Voltage - Supply (Vcc / Vdd): 1.8 V ~ 5.5 V- Data Converters: A / D 6x10b- Oscillator Type: Internal- Operating Temperature: -40 ° C ~ 85 ° CFManufacturer: SGS-THOMSON / ST- RoHS: Yes- Quantity: 1 unit Code T0008 Available Price €5.95
W5100 Mini Network Module Ethernet Shield Arduino compatible W5100 Mini Network Module Ethernet Shield Arduino features: - Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip - Provides a simple mode to connect your module to the local network and the internet - Compatible with the official Arduino Ethernet library - With this shield you can build a web server - It can be used as a server or as a client - Controller: Wiznet W5100 - Supports TCP and UDP protocols - Supports up to 4 simultaneous connections - Compatible with all versions of Arduino: UNO, mega 1280/2560 - Dimensions: 50 x 25x 25mm Code W0074 Available Price €10.90
433MHz RF Wireless Receiver + Transmitter Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features: Specifications of the emitter module: - Power supply: 3V ~ 12V - Working intensity: max = 40mA (at 12V), min = 9mA (at 3V) - AM ASK / OOK modulation - SAW filter - Working frequency: 315MHz-433.92MHz - Transmission power: 25mW (315MHz at 12V) - Range: 20 to 200 meters (different voltages can give different results) - Transfer speed: 4 kB / S - Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V - Work intensity: 5.5mA (at 5.0VDC) - Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm Code W0010 Available Price €1.09
Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC features:- Series: low power AVR®- Core Processor: AVR- Package / Case: 8-DIP- Core Size: 8-Bit- Speed: 20MHz- Connectivity: SPI- Number of I / O: 6- Program MemorySize: 8KB- Program MemoryType: FLASH- EEPROM Size: 512B- Voltage - Supply (Vcc / Vdd): 2.7V ~ 5.5 V- Data Converters: 10bit A / D, 4 chanels- Oscillator Type: External- Operating Temperature: -40 ° C ~ 85 ° C- RoHS: Yes- Quantity: 1 unit Code T0009 Available Price €3.95
Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS Master Slave Bluetooth Modul for Arduino iOS Android. The HM10 supports Bluetooth 4.0 (low energy) and therefore has a relatively low power consumption. Code W0008 Available Price €17.89
74HC595 SN74HC595N 8-Bit DIP-16 With this multiplexer circuit we will be able to get 8 more digital outputs for arduino losing only 3 of them. Code T0020 Available Price €0.49
NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.10
ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC ESP8266-12E is an improved version of ESP8266-12 It works as a standard WiFi 802.11 b / g / n 2.4 GHz USB Communication - CP2102 Chip Characteristic: ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode Code W0014 Available Price €4.95
2x PCF8574P I/O Extension Board 8574 NXP - The PCF8574P is an 8-bit remote I / O expander for the I2C bus with 16-pin DIP packet interrupt. - Provides general-purpose remote I / O expansion via a two-wire, two-way I2C bus (Serial Clock (SCL), Serial Data (SDA)). - Devices consist of eight quasi-directional ports , 100KHz I2C bus interface, three hardware address inputs and interrupt output operating between 2.5V and 6V. - Quasi-bidirectional port can be independently assigned as one input to monitor interrupt status or keyboards or as an output to activate indicating devices like LEDs. - System Master can read from the input port or write to the output port through a single register. Code T0010 Available Price €1.15
L293D Quadruple Half-H Drivers STM L293D Quadruple Half-H Drivers STM features:-Continue 0.6A half-h driver STM Arduino Code T0014 Backorder Price €1.85
NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz features: - The NRF24L01 + module is powered with 3.3V- This adapter module includes a 3.3V voltage regulator- You can connect the NRF24L01 module on it at 5V voltage- Dimensions of PCB: 25x 18mm- Quantity: Adapter 1 unit Code W0023 Available Price €1.49
2N2222 NPN 40V 800mA transistor pack 10pcs Product Category: Bipolar Transistor, NPN. 2N2222 NPN 40V 800mA 300MHz transistor features: - Package / Case: TO-92 - Quantity: 20 units - Collector-base voltage VCBO: 75V - Collector-emitter voltage VCEO: 40V - VEBO emitter-base voltage: 6V - Continuous collector current: 600mA - DC MAX collector current: 800mA - Maximum power dissipation: 1.6W Code T0006 Available Price €0.09
NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features: - Standard: NFC Forum Type2 Tag Ntag215 - Protocol: ISO14443A - Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ - Reading distance: 0-10CM - Communication speed: 106Kboud - Working temperature: -20ºC to 70ºC - Number of uses 100,000 times - Data retention: 10 years - Material: PVC - Dimensions 86 x 54 x 0.84 mm Code M0052 Available Price €1.99
TDA2822M Dual DIP8 Stereo Audio Low Voltage Power Amplifier TDA2822M Dual DIP8 Stereo Audio Low Voltage Power Amplifier features:- Package / Case: 8-DIP- Voltage - Supply (Vs): 1.8V ~ 15V- Quantity: 1 unit Code T0018 Available Price €1.49
IRLZ44N N-Channel Mosfet Transistor TO-220 55V 47A 2x IRLZ44N N-Channel Mosfet Transistor TO-220 55V 47A features:- Package / Case: TO-220- Quantity: 2 units Code T0011 Available Price €1.99
ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features: - Chip ENC28J60 Microchip- Module: 10Base-T- 3.3V power- SPI interface- 25Mhz speed- LED status LED- Hanrun network transformer- Network Interface board HR911105A- Operating temperature: -40ºC to + 85ºC- Dimensions: 51 x 19 x 16 mm Code W0006 Available Price €9.90
NRF24L01 + Wireless Transceiver Module 2.4GHz It is ultra compact and very low consumption. It works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripheral control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Transceiver Module 2.4GHz features: - Based on chip NRF24L01 + Ultra Low Power- Free band: 2.4GHz ISM- Speed: 250kbps, 1Mbps, 2Mbps- Working current - reception: 13 mA- Transmission: 11 mA (900nA -deep sleep mode)- Receiving sensitivity: -94dB 250kbps- Coverage in closed spaces: 15m / 30m- SPI interface- Input voltage: 1.9V- 3.6V- Input / output port voltage: 0V-3.3V / 5V- Coverage in open areas: 100m approx.- Clock frequency: 16MHz Code W0005 Available Price €1.59
4N35 DIP Optocoupler 30V 60mA - 2pcs 4N35 DIP Optocoupler 30V 60mA - features: -NPN Phototransistor Optocoupler Code T0019 Available Price €0.49
2x MOC3020 Optocoupler 400V 2x MOC3020 Optocoupler 400V features:-Triac Driver Output Optoisolator-Pack: DIL 6-Electronic voltage forward: 1.15V-Trigger LED current: 30mA-Voltage isolation: 5,300 VAC RMS-Maximum blocking voltage: 400V-Temperature of operation: -40°C a + 85°C Code T0013 Available Price €0.79
NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface features: - Operating voltage: 5V- Wait time of the module receives the data: more than 2S- The waiting time of the module sends data: more than 300- Transfer speed: 50 Byte / S (theoretical value)- I2C / TWI address: 0 x 47 (decimal 35)- Address NRF24L01: 0 x 34, 0 x 43, 0 x 10, 0 x 10, 0 x 01 (from lowest to highest)- Size: 44 x 23 mm Code W0066 Available Price €4.46
2x LM317T Voltage Regulator DC-DC 1.2V - 37V 1.5A TO-220 2x LM317T Voltage Regulator DC-DC 1.2V - 37V 1.5A TO-220 features: - Output type: adjustable- Voltage Output: 1.2V to 37V- Manufacturer: ST Microelectronics- Current Output: 1.5A- Input voltage Vi- Max Vo: 40V- Operating temperature: 0ºC to + 125ºC- Encapsulated: TO-220- Polarity: Positive- Quantity: 2 units Code T0005 Available Price €0.59
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95
Standard Triac BTA06-600B TO-220 6A 600V STM BTA06 Standard Triac BTA06-600B TO-220 6A 600V STM BTA06 features:- Maximum G Door Trip Current: 100mA- Repetitive Peak Reverse Voltage: 600V- Nominal Suppression Current: 63A- Maximum Door Trip Voltage: 1.5V Code T0023 Available Price €2.80
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
L7812 Voltage Regulator 12V 1.5A TO-220 7812 for Arduino L7812CV L7812CV Voltage Regulator 12V 1.5A TO-220 7812 Arduino L7812CV features:-Type Output: Fixed-Voltage Output: 12V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0004 Available Price €0.26
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59
2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 features:- Type Output: fixed- Voltage Output: 3.3V- Manufacturer: Texas Ins- Output Current: 800mA- Max input voltage: 20V- Operating temperature: 0ºC to + 125ºC- Encapsulated: TO-220- Polarity: Positive- Quantity: 2 units Code T0012 Available Price €1.15
NRF24L01 Adapter + Wireless Transceiver 2.4GHz Socket Arduino compatible NRF24L01 Adapter + Wireless Transceiver 2.4GHz Socket Arduino features: - The NRF24L01 + module is powered with 3.3V- This adapter module includes a 3.3V voltage regulator- You can connect the NRF24L01 module on it at 5V voltage- Dimensions of PCB: 25x 18mm- Quantity: Adapter 1 unit Code W0065 ✗ Out-of-Stock Price €1.49
Voltage Regulator 2% 5V 1.5A TO-220 L7805ACV Voltage Regulator 2% 5V 1.5A TO-220 L7805ACV features:- Output Type: Fixed- Voltage Output: 5V- Manufacturer: ST Microelectronics- Current Output: 1.5A- Max input voltage: 35V- Input voltage min .: 5V- Operating temperature: 0ºC to + 125ºC- Encapsulated: TO-220- Polarity: Positive- 2% output voltage tolerance (A version)- Quantity: 1 unit Code T0016 Available Price €0.66
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
Microcontroller ATMEGA8A-PU ATMEGA8 DIP-28 Atmel Microcontroller ATMEGA8A-PU ATMEGA8 DIP-28 Atmel features: - Series: AVR® ATmega- Core processor: AVR- Package / box: 28-DIP (0.300 ", 7.62 mm)- Core size: 8 bits- Speed: 16MHz- Connectivity: I²C, SPI, UART / USART- I / O Number: 23- Type of memory of the program: FLASH 8kB- EEPROM size: 512B- RAM size: 1kB- Voltage - Supply (Vcc / Vdd): 2.7 V ~ 5.5 V- Data converters: 10bit A / D- Type of oscillator: internal- Operating temperature: -40 ° C ~ 85 ° C- RoHS: Yes- Quantity: 1 unit Code T0007 Available Price €4.99
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
XM-15B Bluetooth Serial Port Module Master Slave Arduino compatible HC-05/06 XM-15B Bluetooth Serial Port Module Master Slave Compatible Arduino HC-05/06 features: * Power 3.0V -6V* 3.3V / 5V logic levels* Bluetooth version V2.1 + EDR* Frequency: 2.4GHz ISM band* Reach approx. 30m* Security: Authentication and encryption* Supports AT commands for configuration through a serial port* Working temperature: -20 ºC to +75 ºC* Working current - 50 mA* PCB dimension: 35 x 19m -Using the conventional Bluetooth CSR chip, the protocol standard Bluetooth V2.1 + EDR, passes the Bluetooth BQB certification-Fast start, only 0.3 seconds to complete the initialization of the complete module (including the Bluetooth protocol stack)- Built-in hardware protector, never hangs Code W0022 Available Price €7.49
ESP8266 WiFi Motor Drive L293D Expansion Shield Board ESP12E NodeMcu Allows control: - Up to 2 bidirectional current motors- Or 1 stepper motor Shield is compatible with NodeMcu ESP8266 CP2102 WIFI Development Board ESP8266 WiFi Motor Drive L293D Expansion Shield Board ESP12E NodeMcu features: - Minimum operating voltage: 4.5 V- Maximum operating voltage: 36 V- Maximum current: ± 1.2 A- Logic voltage: - 2.3V <= HIV <= VIN (high) - 0.3V <= VIL <= 1.5V (low)- Controller L293D- Measures: 58x42 mm ESP12 port control kit: - D1, D3 - motorA- D2, D4 - motorB Code W0015 Available Price €3.49
Bridge Rectifier KBL10 - 4A/1000V Bridge Rectifier KBL10 - 4A/1000V features: - Maximum reverse voltage: 1000 V- Vf - Front tension: 1.0 V- Max. Overvoltage current: 200 A- Minimum operating temperature: - 50 C- Maximum operating temperature: + 150 C- Go - Reverse current: 10 uA- Quantity: 1 unit Code T0036 Available Price €0.74
ESP8266 5V WiFi Relay Module AP Remote Control + STA You can easily control any device over the Internet through your phone, computer, etc. The module can handle 5 users at the same time, it can work in two modes: STA (client) and AP (access point). In AP mode, the module is connected via WIFI directly to your phone or computer (in open field can be up to 300 meters). In STA mode, the relay module is connected to the access point (router) that supplies the network. Wi-Fi in the room where the relays are located. In this case, the range mainly depends on the power of the access point antennas (routers). You should not turn off after the configuration is completed, as some of the parameters of the WIFI module cannot be saved when power is cut off. Code W0067 Available Price €9.49
Bridge Rectifier DB107 1A / 1000V DIP4 5x Bridge Rectifier DB107 1A / 1000V DIP4 features:- Maximum reverse voltage: 1000V- Vf - Front tension: 1.0 V- Max. Overvoltage current: 50A- Minimum operating temperature: - 50 *C- Maximum operating temperature: + 150 *C- Quantity: 1 unit Code T0037 Available Price €0.35
5x Rectifier Bridge RB154 - 1.5A / 400V 5x Rectifier Bridge RB154 - 1.5A / 400V features:- Maximum reverse voltage: 400 V- Current Iav 25ºC - 1.5A- Vf - Front tension: 1.0 V (1A)- Max. Overvoltage current: 50 A- Minimum operating temperature: - 50ºC- Maximum operating temperature: + 150ºC- Quantity: 5 units Code T0038 Available Price €0.34
2x Bridge Rectifier GBU10M - 10A/1000V 2x Bridge Rectifier GBU10M - 10A/1000V features: - Maximum reverse voltage: 1000 V- Vf - Front tension: 1.0 V- Current If (av) - 10A (with heat sink)- Max. Overvoltage current: 250 A- Minimum operating temperature: - 50 C- Maximum operating temperature: + 150 C- Go - Reverse current: 5 uA- Quantity: 2 units Code T0039 Available Price €0.99
Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development Mini ESP8266 ESP12E CH340 WiFi Development NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu it is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC It works as a standard WiFi 802.11 b / g / n 2.4 GHz Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development features: - Compatible with Arduino, programming with the Arduino IDE - Power supply voltage: 5V - LOGICAL LEVELS: 3.3V - 11 input / output pins - 1 ADC (input: 0-3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and power management units Integrated Code W0061 Available Price €3.49
2x Bridge Ractifier KBU8M - 8A/1000V KBU810 2x Bridge Ractifier KBU8M - 8A/1000V KBU810 features: - Maximum reverse voltage: 1000 V- Vf - Front tension: 1.0 V- Current If (av) - 8A- Max. Overvoltage current: 300 A- Minimum operating temperature: - 50 C- Maximum operating temperature: + 150 C- Go - Reverse current: 10 uA- Quantity: 2 units Code T0040 Available Price €1.94
NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module Development Board NodeMcu module based on ESP8266 controller and programming in Lua language. NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC. ESP8266-12E is an improved version of ESP8266-12. It works as a standard WiFi 802.11 b / g / n 2.4 GHz. USB communication - the CH340 chip. Characteristics of ESP 12E: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - TCP Stack / Integrated IP - PLLs, Regulators and Integrated Power Management Units - Output Power: 0.15 (W); + 19.5dBm in 802.11b mode Code W0013 Available Price €4.49
2x Bridge Rectifier KBU6M - 6A/1000V KBU610 2x Bridge Rectifier KBU6M - 6A/1000V KBU610 features: - Maximum reverse voltage: 1000V- Vf - Front tension: 1.0 V- Current If (av) - 6A- Max. Overvoltage current: 250 A- Minimum operating temperature: - 50 C- Maximum operating temperature: + 150 C- Go - Reverse current: 10 uA- Quantity: 2 units Code T0041 Available Price €1.74
NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA - This module includes PA preamplifier and LNA (Low-noise amplifier)- Comes with the SMA antenna for 2.4GHz (2dB)- Outdoor - transmission up to 250kbps and a distance of up to 1 kilometer- Works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripherals control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA features: * Based on chip NRF24L01 +* Free band: 2.4GHz ISM* Speed: 250kbps, 1Mbps, 2Mbps* Work current- Reception: 45 mA- Transmission: 115 mA (4.2uA -sleep mode)* Receiving sensitivity:-104dB 250kbps- 95dB 1Mbps- 92dB 2Mbps* SPI interface Code W0063 Available Regular price €6.95 -€1.50 Price €5.45
3x Bridge Rectifier KBP210 - 2A/1000V 3x Bridge Rectifier KBP210 - 2A/1000V features: - Maximum reverse voltage: 1000 V- Vf - Front tension: 1.1 V- Current If (av) - 2A- Max. Overvoltage current: 60 A- Minimum operating temperature: - 50 C- Maximum operating temperature: + 150 C- Go - Reverse current: 10 uA- Quantity: 3 units Code T0042 Available Price €0.79
BC547B NPN 50V 100mA transistor 0.1A TO-92 Product Category: Bipolar Transistor, NPN. BC547B NPN 50V 100mA transistor 0.1A TO-92 features: - Package / Case: TO-92 - Quantity: 25 units - Collector-base voltage VCBO: 50V - Collector-emitter voltage VCEO: 45V - VEBO emitter-base voltage: 6V - Continuous collector current: 100mA - DC MAX collector current: 200mA - Maximum power dissipation: 500mW Code T0043 Available Price €0.04
Wireless Module Arduino compatible HC-05 HC05 Bluetooth The bluetooth HC-05 module is one of the best options for projects where you need wireless communications. The transceiver module (transmission / reception) allows bluetooth wireless connections as master or slave, works transparently as if making a wired RS-232 TTL serial connection. Arduino Wireless Module HC-05 HC05 Bluetooth features: - CSR BC417 Chipset - Power: 3.3. - Bluetooth version V2.0 + EDR - Frequency: 2.4GHz ISM band - Modulation: GFSK - Approximate range: 10m - Security: Authentication and encryption - Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps - Supports AT commands for configuration through a serial port temperature: -20 ºC to +75 ºC Code W0019 ✗ Out-of-Stock Price €8.90
L7805 Voltage Regulator 5V 1.5A TO-220 L7805CV Voltage Regulator 5V 1.5A TO-220 features:-Type Output: Fixed-Voltage Output: 5V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0022 Available Price €0.39
Transceiver 1km SI4432 433MHz Wireless Transmitter Telemetry Transceiver 1km SI4432 433MHz Wireless Transmitter Telemetry features: - Transceiver based on the SI4432 Silicon Labs chip - Ultrathin ultra small (16.5 × 17 mm) - Good harmonics: easy for FCC / CE certification - Penetration capacity (measured through 8 floors) - Frequency range: 433.92MHz - Sensitivity down to -121 dBm - Maximum output power: 20dBm - Data transfer rate: 0.123-256 kbps - FSK, GFSK and OOK modulation - Power supply: 1.8-3.6 V - Ultra low power shutdown mode - Digital indication of received signal strength (RSSI) - Time to wake up - Bidirectional antenna switch control and automatic adjustment - Configurable packet structure - Preamble detection Code W0075 Available Price €4.99
BC557B 50V PNP Transistor 100mA 0.1A TO-92 Product Category: Bipolar Transistor, PNP BC557B 50V PNP Transistor 100mA 0.1A TO-92 features: - Package / Case: TO-92 - Quantity: 25 units - Collector-base voltage VCBO: 50V - Collector-emitter voltage VCEO: 45V - VEBO emitter-base voltage: 6V - Continuous collector current: 100mA - DC MAX collector current: 200mA - Maximum power dissipation: 500mW Code T0044 Available Price €0.04
1.5km radius SI4432 433MHz RF Telemetry Transceiver based on the SI4432 Silicon Labs chip Industry standard model Capacitive components manufactured by Murata with 10ppm high precision glass Outdoors - a distance of up to 1.5 km 1.5km radius SI4432 433MHz RF Telemetry features:- Supply voltage: 1.8 ~ 3.6VDC (Note: a voltage higher than 3.6 V will cause permanent damage to the module) - Communication level: 0.7VDC ~ 3.6V (VCC refers to the module supply voltage) - Working frequency: 425M ~ 525MHz (via software setting, the module uses 30M glass) - Measured distance: 1500m (clear and open, maximum power, height 1.5m, air speed 1k) - Transmission power: up to 20dBm (about 100mW) - Air rate: 0.123k ~ 256Kbps (software adjustable, low airspeed recommended) Code W0080 ✗ Out-of-Stock Price €4.99
Voltage Regulator LDO 3.3V DC SOT223 SMD LM1117 TS1117BCW-3.3 Manufacturer: Taiwan Semiconductor 5x Voltage Regulator LDO 3.3V DC SOT223 SMD LM1117 TS1117BCW-3.3 features: - Type Output: fixed- Voltage Output: 3.3 V- Output Current: 800mA- Max input voltage: 12V- Operating temperature: -20C to + 85ºC- Encapsulated: SOT223- Dropout Voltage Vdo: 1.3V (1A)- Quantity: 5 units Code T0001 ✗ Out-of-Stock Price €0.75
Ethernet Shield W5100 Web Server Shield Ethernet for Arduino boards and compatible based on the Wiznet W5100 chip. Provides an easy way to connect your module to the local network now internet. Compatible with the official Arduino Ethernet library. With this shield you can build a web server. It can be used as a server or as a client. It has support for a microSD that can be used to store files for distribution on the network. Ethernet Shield W5100 Web Server features: - Controller: Wiznet W5100 - Supports protocols TCP and UDP - Supports up to 4 simultaneous connections - Compatible with all Arduino versions: UNO, mega 1280/2560 - Dimensions: 74 x 54 x 25mm Code W0007 Available Price €21.95
2km radius SI4463 433MHz RF Telemetry Arduino compatible A compact, low-power Bottom Effect System Transceiver. Transceiver based on the SI4463 Silicon Labs chip. Industry standard model. In full power operating conditions, open the communication distance up to 2000 km. Much more than the SI4432. Si4463 is a high performance 433 MHz transceiver. and low current consumption of the EZRadioPRO series, which includes a complete transmitter and receiver. Higher sensitivity -126dBm. The maximum output power of + 20dBm, support (G) FSK, 4 (G) FSK, (G) MSK, OOK and ASK modulation. The data rate in the range of 100bps ~ 1Mbps. Operating voltage of 1.8V ~ 3.6V. FCC approval / IC. 2km radius SI4463 433MHz RF Arduino Telemetry features: - Supply voltage: 1.8 ~ 3.6VDC Code W0077 Available Price €7.24
2x CD4056BE 7 Segment BCD Decoder Integrated CD 4056 DIP 2x CD4056BE 7 Segment BCD Decoder Integrated CD 4056 DIP features: - Product: LCD CMOS controllers- Number of segments: segment 4: 7- Maximum clock frequency: 8 MHz- Operating supply voltage: 3V to 18V- Minimum operating temperature: - 55 C- Maximum operating temperature: + 125 C- Package / box: PDIP-16 - Mounting style: Through Hole- Operating temperature range: - 55 C to + 125 C- Pd - Dissipation power: 500 mW- Supply current - Max: 300 uA- Quantity: 2 units Code T0021 Available Price €1.04
Analog-Digital HX711 Converter with 24 Bit Resolution SMD Chip Based on the patented technology of Avia Semiconductor, HX711 is a 24-bit precision analog-digital converter (ADC) designed for weight scales and industrial control applications to interact directly with a bridge sensor.The input multiplexer selects the differential input of channel A or B to the programmable low noise gain amplifier (PGA).Channel A can be programmed with a gain of 128 or 64, corresponding to a full scale differential input voltage of ± 20mV or ± 40mV respectively, when a 5V source is connected to the analog power supply pin AVDD.Channel B has a fixed gain of 32.The Onchip power supply regulator eliminates the need for an external supply regulator to provide analog power for the ADC and the sensor. Code T0046 Available Price €1.79
74LS86N DIP14 Input Logic NAND Gates O-Exclusive 74LS86N DIP14 Input Logic NAND Gates O-Exclusive features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 4.75 - 5.25 VDC- High level input voltage V (IH): 2 VDC- Low level input voltage V (IL): 0.8 VDC- Input clamp voltage V (IK): -1.5 VDC- High level output voltage V (OH): 2.4 - 3.4 VDC- Low level output voltage V (OL): 0.2 - 0.4 VDC - High level output current I (OH): -800 μA- Low level output current I (OL): 16 mA- Input current to VCC: 1 mA- High level input current I (IH): 40 μA- Low level input current I (IL): -1.6 mA- Short circuit output current I (OS): -55 - -18 mA Code T0048 Available Price €1.10
SIM808 GPRS GSM GPS Bluetooth SIM Quadband SIM808 GPRS GSM GPS Bluetooth SIM Quadband features: - SIM card SIM808 GPRS GSM GPS Bluetooth SIM - Supply voltage range: 3.4-4.4V - Four bands GSM 850/900/1800 / 1900MHz - GPRS multi-slot class 12/10 - GPRS mobile station class B - According to GSM phase 2/2 + - Class 4 (2 W at 850/900 MHz) - Class 1 (1W at 1800 / 1900MHz) - Control by AT commands (3GPP TS 27.007.27.005 and enhanced AT Commands from SIM Com) - Operating temperature: -40 to + 85 ° C - PCB dimension: 38x38mm - GPS sensitivity - Tracking: -165dBm Cold start Sensitivity - Cold start: -147dBm - Time to first solution - Cold start: 30 s - Start to warm up: 28s - Already hot: 1s - Accuracy Code W0069 Available Regular price €19.89 -€3.00 Price €16.89
74HC00N DIP14 Input Positive Logic NAND Gates 74HC00N DIP14 Input Positive Logic NAND Gates features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 2 - 6 VDC- High level input voltage V (IH): 1.5 - 4.2 VDC- Low level input voltage V (IL): 0.5 - 1.8 VDC- Input voltage V (I): 0 - 6 VDC- Output voltage V (O): 0 - 6 VDC- High level output voltage V (OH): 1.9 - 5.9 VDC- Low level output voltage V (OL): 0.1 - 0.33 VDC - Leakage current I (I): ± 1000 nA- I (DC) supply current: 20 mA - Operating temperature: -40 ° C to 85 ° C- Storage temperature: -65 ° C to 150 ° C Code T0049 Available Price €1.10
Shield Li-Po Battery for WeMos D1 Mini ESP826 Shield Li-Po Battery for WeMos D1 Mini ESP826 features: Connect the lithium battery to this shield to supply power for the entire D1 mini system. When the battery is depleted, it is not necessary disconnect the battery, just use the usb port to charge directly. - Charging voltage: max: 10V, recommend: 5V - Charging current: max: 1A - Voltage lithium battery: 3.3-4.2V - Boost power supply: 5V (max: 1 A) - LED color: red for charging, green for fully charged - Ports: * Micro USB - Charging port (normal 5V) * Connect to the lithium battery (normal 3.3-4.2V) * J1 - setting the maximum charging current, 0.5 A or 1A Code W0076 Available Regular price €4.76 -€1.00 Price €3.76