Tools

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features:
- A protective film, transparent
- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination
- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film
- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors
- Application temperature: od -40 ° C + 60 ° C

This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed.

This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed.

Thermal Pad Silicone Heat Pad CPU GPU features:
- The transfer of heat between the electronic components and the radiator is facilitated.
- Thermal conductivity 1,5W / mK
- Thickness 1mm quantity: 1 unit
- High quality - manufactured in EU
- Thermopad 100x20x1mm
- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling

Thermal Pad Silicone Heat GPU CPU 130x20x1mm. The tapes are thermally used as an application of a thermal paste.

Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out. Easy to dissolve. It acts very regular with guarantee of contour sharpness. 

Hantek Oscilloscope 6022BE USB 2 channel 20MHz features:
- 20 MHz bandwidth
- High performance: 48MSa / s sampling in real time
- 23 measurement functions
- The ability to perform mathematical operations:
- Addition - add CH1 + CH1
- Subtraction - subtract CH1-CH2 or CH2-CH-1 - Multiplication - multiplication CH1 * CH2
- Division - division CH1: CH2 or CH2: CH1
- FFT analysis spectral analysis using a fast Fourier transform
- The ability to save runs in the following formats: text files, jpg / bmp graphics files, Excel / MS Word files, CSV
- Compatible with LabVIEW
-USB 2.0 communication interface - powered from the USB port - Operating System: Windows8, Windows 7, Windows NT, Windows 2000, Windows XP, VISTA

Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg features:
A compound for etching of printed circuit boards and pickling of copper. An ideal alternative to ferric chloride. It is readily soluble and does not crystallize from the solution. It etches evenly, ensures the sharpness of contours and minimizes undercutting. Usage: Dissolve the preparation in 0.5 l of water at a temperature of 50°C. Perform etching at 40°C (max. 50°C). Bath movement ensures quicker etching. The etching solution must not be stored in hermetically sealed containers due to the risk of developing overpressure and cracks.

Thermo Silicone Paste Cleaner features:
This product is safe and easy to use with a pleasant aroma of citrus.
It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned
- Wait 1-2 minutes
- Clean with a cloth

Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.
It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features:
- Excellent dielectric properties
- It is used in different industrial processes as a lubricant (due to its greasy consistency)
- Particularly suitable for lubricating plastic and rubber parts
- Ideal as an insulating coating that does not harden
- High quality - Made in EU

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).
- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales.

Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)
- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)
-the keyboard and the LCD screen

Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s.
Hantek Oscilloscope 6022BL USB 2 channel 20MHz features:

16-channel logic analyzer, 20MHz bandwidth.
Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions.
Intensity, inversion, addition, subtraction, multiplication, division, XY.
Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function.
One computer can connect to many DSOs, the channel can be easily extended.
Specifications:
Inputs: 2 channels.
Bandwidth: 20 MHz.

Graphite Grease Spray Anticorrosive 100ml features:
Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: - Car leaf springs
- Worm gear
- Change gear train
- Screw thread
- Screwbolt which are exposed to corrosion
- Chains and other hardly burden nodes of friction working in a temperature range from -20°C to 50°C

Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.
It is necessary for the correct operation of any type of temperature sensors.

Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K

Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls)

TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 26x26x0,3mm

Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 41.5x28.2x0.3mm

Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass.
- Dimensions: 23x18x0,3mm

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 011 features:
- Mixing ratio: 100: 8,
- Density: 0.97g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 019 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100:6,
- Density: 1.2g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 45000 cP,

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 021 features:
- Manufacturer: TermoPasty,
Mixing ratio: 100: 10,
Thermal conductivity: 1.2 W / mK,
Density: 1.12g / cm3,
Pre-crosslinking: 30-40 min,
Working temperature from -50ºC to + 200ºC,

The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.
The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.
After curing, it is very soft.
Creates an excellent electrical insulation.
It has a wide range of temperatures, from -55 ° C to 200 ° C.
Silicone compound 031 Double-component gel features:
- Mixing ratio: 3: 2,
- Density: 0.98g / cm3,
- Pre-crosslinking: 50-60 min,
- Working temperature from -50ºC to + 180ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.
Mode of use:
- Clean, degrease and dry the system.

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 029 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100: 10,
- Thermal conductivity: 2 W / mK,
- Density: 1.15g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK.

Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.
A special brush facilitates the application of the paste.
Diamond powder content: 10%
AG Extreme thermal grease 4g flask features:
- Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,
- Thermal impedance: <0.065 ° C in2 / W
- Specific gravity:> 2.4g / cm3,
- Evaporation: <0.001%,
- Fluency: <0.001%,
- Electrical conductivity: insulation,
- Viscosity: 1000 cP,
- Working temperature from -40ºC to + 300ºC,
- Supported temperatures: -40ºC to + 350ºC,
- Gray.
Mode of use:
- Store in a well ventilated, cool and dry place.

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK.

AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.
Thermal conductivity:> 2.8 W / mK,

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. The application method guarantees simplicity of use, and the product can be easily applied to various computer accessories and LEDs. Ideal as a heat transmitter from the heat pipe condenser to the heat exchanger in a vacuum solar collector. Thermal conductivity: 6 W / mK.

Virtual multimeter for PC, it replaces a conventional multimeter and also performs functions of autonomous datalogger and recorder.
Characteristic:
- Continuous measurement and recording of values ​​of voltages, currents, resistances, capacity, etc., in real time and with creation of graphs and curves,
- Electrical insulation,
- Compatible with Windows 2000, Windows 7, Windows XP, Win8 / 10
- Plug & play connection via USB,
- Simple and intuitive software.
Measurements and tolerances:

Anti-Adhesive No-Fat Dry Spray Based on PTFE. Dry, no-fat, anti-adhesive agent based on pure PTFE. Perfect greasing solution for surfaces that must be slippery, especially when it is required to protect them against contamination present in the environment. Very low friction factor.

Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.
Application: Installation of boilers, furnaces, motors, heating systems, water pumps.

The grease reduces the friction of the metal parts to a minimum. Provides lasting protection against rinsing and abrasion.
Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis.

The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.
It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.
Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application.

Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections.

8-channel oscilloscope for vehicle testing.
More than 80 kinds of automotive diagnostic functions (ignition detection / sensor / bus detection / performance / starting and charging circuits , etc.). The video help function provides the diagnostic video help that can be viewed online. The diagnostic result can be generated a diagnostic report, printed or taken a screenshot by pressing a key, many methods to save the data. Supported for recording waveform for a long time. You can simulate the camshaft and crankshaft signal. Transmit signals through the USB 2.0 plug and play interface, and requires no additional power supply; Key Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ features:

Liquid Flux for Alcohol-Based Rosin Welding 15ml features:
- Flux liquid alcohol-based for electronic welding
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- Capacity: 15ml
- Content of solid bodies 0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features:
- The breaking voltage is ~ 30kV / mm.
- Preserves rubber, plastic
- A wide range of operating temperatures: -50 ° C to 200 ° C
- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (like those of ROM cartridges)
- Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)
- Laser lenses in optical disk drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and LCD screen Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for slates.

Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.
It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces Silicone Oil 100ml to Lubricate features:
- Excellent dielectric properties
- It is used in different industrial processes as a lubricant (due to its greasy consistency)
- Particularly suitable for lubricating plastic and rubber parts
- Ideal as an insulating coating that does not harden
- High quality - manufactured in EU

Spray Contact Cleaner 300ml features:
A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections
- Has cleaning properties
- Used in audio technologies
- Protection against moisture and corrosion
- Prevents stray current

Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:
It facilitates the transfer of heat between the electronic components and the radiator.
It's necessary for the correct operation of any type of temperature sensors.
Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.
-Density at 20°C: 2.58 G/cm3
-Points: 350°C
-Freezing point: -50°C
-Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K
-Constant dielectric at 100 Hz: 4.7 (± 0.1)
-Cross resistance: 5x10 to power 14 Ohm x cm

A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - manufactured in EU

Silicone Oil 50ml features:
Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties
- it is used in different industrial processes as a lubricant (due to its greasy consistency)
Particularly suitable for lubricating plastic and rubber parts
Ideal as an insulating coating that does not harden

Welding Acid AG 35ml features:
Prepared transparent liquid, acidic, corrosive.
Prepares and facilitates welding on nickel-plated surfaces.
Apply a small amount of the preparation on the element to be welded, and then wash it with water. CAUTION:
Dangerous preparation, contains up to 35% phosphoric acid. In case of contact with skin or eyes, wash with plenty of water and consult a doctor. Keep closed and out of reach of children. It causes burns. Risk of serious eye damage.

Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides.

Compressed Air 300ml Spray Cleaner features:
- Cleaning computers, keyboards, electronics, printers
- All types of office material
- Made in the EU - HIGH QUALITY
- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices

Isopropyl alcohol is used for cleaning: - of electronic devices such as contact tips (such as those of ROM cartridges)
- tapes magnetic and disk heads (such as those for audio and video recorders and floppy drives)
- laser lenses on optical disc drives (eg CD, DVD) and removal of thermal paste of heat sinks and integrated circuit packages (for example: CPU)
-of the keyboard and LCD screen
-Usefully used to clean photographic lens lenses and contacts of electronic devices as it leaves no marks and is quick to evaporate.

Isopropyl alcohol is used for cleaning: - of electronic devices such as contact tips (such as those of ROM cartridges)
- tapes magnetic and disk heads (such as those for audio and video recorders and floppy drives)
- laser lenses on optical disc drives (eg CD, DVD) and removal of thermal paste of heat sinks and integrated circuit packages (for example: CPU)
-of the keyboard and LCD screen
-Usefully used to clean photographic lens lenses and contacts of electronic devices as it leaves no marks and is quick to evaporate.

Isopropyl Alcohol Propanol Spray 300ml features:
Isopropyl alcohol is used for cleaning: -Electronic devices, such as contact tips (like those of ROM cartridges)
-Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)
-Laser lasers on optical disc drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU)
-From the keyboard and the LCD screen

Thermal Conductive Pad TO220 18x13x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 18x13x0,3mm

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features:
A protective film, transparent.
Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.
Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.
PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.
-Temperature of application: -40°C + 60°C.
-Operating temperature: -50°C + 150°C.

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:
-A protective film, transparent.
-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination
-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the
protective film
-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to be
soldier, such as welding terminals or conductors.
-Temperature of application: od -40 ° C + 60 ° C.

The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work.
Universal developer for photo varnish and positive printed circuit boards PCB.

Self-adhesive label remover - removes labels form all kinds of packaging. Caution: the preparation may imperceptibly dissolve a colorful print under the removed label as well as dissolve some plastics - caution recommended!

Machine Cup Grease with Dispenser 65ml features:
- Product designed for lubrication of various bearings, joints and guideways. It works in temperatures from -24°C to 135°C at high loads. Resistant to washing-out with cold water. Provides protection against corrosion

Silicone and Protective Grease with Teflon 20g features:
- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
- Silicone and Protective Grease with Teflon 20g features:
a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment