Banana Plug Connector 4mm Male Black Banana Plug Connector 4mm Male Black features: - Arduino PCB Robot PCB Test Code K0025 Available Price €0.39
2x Electronic Clips Crocodile 2x50mm Black + Red pack 2pcs 2x Electronic Clips Crocodile 2x50mm Black + Red features: - Length: 50mm- Quantity: 2 units Code K0026 Available Price €0.99
2x Banana Connector Diameter 4mm Red and Black pack 2pcs 2x Banana Connector Diameter 4mm Red and Black features: - Length: 40 mm- Diameter plug: 4mm- Quantity: 2 units Code K0030 Available Price €0.79
Relay SRD-05 DC-2P 5V 10A SPDT - SRD-05VDC-SL-C Relay SRD-05 DC-2P 5V 10A SPDT features:- Supply voltage: 5V- Output Current: 10A- For power switching with 5V DC signals - Microcontroller, Arduino, Electronica Code RL011 Available Price €0.69
2x Cable Female - Female 4 Pins 4 Colors For connecting Arduino modules or boards. Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. 2x Cable Female - Female 4 Pins 4 Colors features: - No soldering required - Circuits can be easily modified or revised - Quantity: 2 cables of 4 pins, female - female connector - Colors: red, black, blue, green - Pin pitch: 2.54mm - Cable lengths: 70cm For one rapid construction of a prototype of an electronic circuit. Code K0090 Available Price €0.99
Relay SRD-12 DC-2P 12V 10A SPDT Relay SRD-12 DC-2P 12V 10A SPDT features:- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- For power switching with 12V DC signals - Microcontroller, Arduino, Electronica Code RL012 Available Price €0.98
Relay Module 1 Channel 5V 10A 1 Channel 5V Relay Module. This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). Relay Module 1 Channel 5V 10A features: - Channel: 1 - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - LED indicator - Dimensions: 30x 54mm Code RL005 Available Price €1.29
Female to Female Cable 3 Pins 3 Colors Ideal for your electronic projects, Arduino, but can also be used with other microcontrollers. Code K0091 Available Price €0.95
1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino 1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL001 Last items in stock Price €2.39
40x Female-Female Cable 10cm 40x Female-Female Cable 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont female connectors on both ends - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K1005 Available Price €1.99
Relay Module DC 12V 10A 1 Channel Low/High Trigger Relay Module DC 12V 10A 1 Channel Low/High Trigger features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high) Code RL003 Available Price €2.29
Relay Module DC 5V 10A 2 Channel Low/High Trigger Relay Module DC 5V 10A 2 Channel Low/High Trigger features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- It has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL002 Available Price €3.15
Lot of 100unds White Nylon Clamps Lot of 100unds White Nylon Clamps features: - Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units Code K0259 Available Price €1.79
2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino 2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL004 Available Regular price €3.15 -€0.50 Price €2.65
Alligator clip connectors Red + Black pack 2unds Alligator clip connectors Red and Black. Code K0255 Available Price €0.59
4-Channel 5V 10A Relay Module Characteristic: - Channels: 4 (independent protected by Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - Indicator LED: For each channel - Dimensions: 54x 72mm - 5V Optocoupled 4-Channel Relay Module - This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for the remote control + 4-channel 315 MHz IC2262 receiver: - Relay Module Programming 5V 10A 4 Channel with remote control + 4 channel receiver Code RL007 Available Price €3.99
40x Male to male cables 10cm 40x Male to male cables 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont male connectors on both ends - Compatible with 2.54mm female connectors - High quality and good working condition - Easy to install and use Code K0107 Last items in stock Price €1.99
8 Channel High Trip 5V 10A Relay Module This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, from the TTL 8 Channel High Trip 5V 10A Relay Module features: - Channels: 8 (independent protected with Optocouplers) - Supply Voltage Vcc: 5Vdc - Output Current: 10A - High trip min 3.3V input IN1. ..IN8 - Relay activation current: 5 ~ 10mA - Isolation: Yes - Indicator LED: For each channel - Dimensions: 55x 139mm - Weight: 120g COM GND jumper input: connects GND optocouplers and GND of the circuit Code RL015 Available Price €9.95
40x Female Male 10cm 40x Female Male 10cm features: - Length: 10cm - Quantity: 40 cables - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K0106 Available Price €1.99
8 Channel 5V 10A Relay Module Arduino compatible 5V Relay Module with 8 opto-coupled channels. This module can be directly controlled by the microcontroller ( Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). 8 Channel Arduino 5V 10A Relay Module features: - Channels: 8 (independent protected with Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - LED indicator: For each channel - Dimensions: 54x 135mm Code RL008 Available Price €9.49
2x Cable Alligator Clip Black and Red Multimeter 2x Cable Alligator Clip Black and Red Multimeter features: - Length: 90cm- Colors: red and black- Quantity: 2 Cables Code K0016 Available Price €2.99
16 Channel Relay Module 12V 10A This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL, PLC output).16 Channel Relay Module 12V 10A AVR features:- Channels: 16 (independent protected with Optocouplers)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 3mA- Insulation: Yes- Low shot: 0-2V- LED indicator: For each channel- Dimensions: 18x 9x 2cm Code RL009 Available Price €15.49
Module Relay 5V Light sensor LDR photoresistor This module is a three way switch ( COM, NO and NC ) that uses the intensity of the ambient light to control directly the load at the output. Its adjustment potentiometer allows changing the sensitivity and setting the start threshold of the relay. The relay is energized when it is darker than the threshold. Code RL016 Available Price €2.39
Cable 1x1.5 Flexible Single-pole 1.5mm black 1m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x1.50mm2 -Service voltage: 450 / 750V -Service temperature: at 70ºC -Resistance at 20ºC: 13.3 Ohm / Km -Weight (Kg / Km): 21 -External diameter: 3.4mm -Length 1m Code K0041 Available Price €1.08
Cable 1x1.5 Flexible Single-pole 1.5mm green-yellow 1m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x1.50mm2 -Service voltage: 450 / 750V -Service temperature: at 70ºC -Resistance at 20ºC: 13.3 Ohm / Km -Weight (Kg / Km): 21 -External diameter: 3.4mm -Length 1m Code K0043 Available Price €1.08
Module Relay 12V Light sensor LDR This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold. The optical isolation relay effectively protects the chip and ensures better performance. This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1 - Supply voltage: 12VDC - Output load capacity: 250V 10A AC / 30V 10A DC - Relay activation current: & gt; 100mA - Insulation: Yes - Indicator LED: Green and Red - PCB size: 5x2.6 cm / 1.96x1.02 " Code RL019 Available Price €3.49
SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output The DC-DC 25A solid state relay has a 3-32VDC input and a 6-60VDC output. It has a maximum load capacity of 25A. It has a long operating life and high reliability, a compact size. This relay switches very quickly. Fotek SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output Code RL017 Available Price €7.99
Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm -Length 1m Code K0035 Backorder Price €0.45
Solid State Relay SSR-25 DA 12A DC-AC Output 24V-380VAC The DC-AC 12A solid state relay has a 3-32VDC input and a 24-380VAC output. It has a maximum load capacity of 12A. It has a long operating life and high reliability, a compact size. This relay switches very quickly. Solid State Relay SSR-25 DA 12A DC-AC Output 24V-380VAC Code RL018 Available Price €7.99
Timer Relay Module FRM01 The multifunctional relay control module, FRM01, is designed for customers with different synchronization and control needs.The FRM01 is controlled by the STM8S003F3P6 microcontroller and has 18 different functions.Each function can be customized to meet customer needs in a variety of time and power control applications.The FRM01 is equipped with a high-quality power relay, a high-power voltage transistor, red and blue LED indicators, an LED display on a double-sided PCB board.The output of the board is driven by a high quality power relay capable of controlling the AC and DC loads. Timer Relay Module FRM01 features: - Operating voltage: 12 VDC- 4 buttons: SET, SWI, NUM +, NUM-- Operating temperature: -20 °C - + 60 °C Code M0159 Available Regular price €9.95 -€2.00 Price €7.95
Relay SPDT JQC-3FF 5VDC-1ZS Relay 5VDC SPDT 5VDC JQC-3FF for industrial applications, automation and process control and consumer electronics. Relay SPDT JQC-3FF 5VDC-1ZS features: - Coil voltage: 5 VDC,- Coil power: 360 mW,- Switching capability: - 10A @ 277 VAC - 12A @ 125 VAC- Operating time: between 5ms and 10ms,- Plastic sealed and flux proofed types available,- Environmental friendly product (RoHS compliant),- Working temperature: -40ºC to 70ºC,- Outline dimensions: 19.0 x 15.2 x 15.5 mm. Code RL020 Available Price €0.98
Cable 1x0.35 Flexible single-pole 0.35mm red 3m Characteristic: -Low-voltage electric cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm Code K0033 Backorder Price €0.45
W1209 12V DC Thermostat Digital Temperature Controller Switch W1209 12V DC Thermostat Digital Temperature Controller Switch features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50 -110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measurement accuracy: 0.1 ° C - Refresh rate: 0.5 s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Power of output: 10A relay - Sensor probe: NTC waterproof sensor (10K 0.5%) - Environmental requirements: -10 ~ 60 ° C Humidity 20% -85% - Dimensions: 48 x 40 mm Code M0102 Available Price €3.79
W1209 DC 12V Thermostat + Transparent Box Temperature Controller W1209 DC 12V Thermostat + Transparent Box Temperature Controller features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50-110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measure accuracy: 0.1 ° C - Refresh rate: 0.5s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Output power: 10A relay - Probe sensor: NTC (10K 0.5%) Waterproof Sensor - Environmental requirements: -10 ~ 60 ° c Humidity 20% -85% - Dimensions: 48 x 40mm Code M0106 Available Regular price €6.44 -€0.08 Price €6.35
Cable 1x0.35 Flexible single-pole 0.35mm black 1m Cable 1x0.35 Flexible single-pole 0.35mm² black features: -Conductor: Flexible Copper -Insulation: PVC -Low voltage electrical cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm² -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer Diameter: 2.4mm Code K0031 Backorder Price €0.45
Sonoff Mini - obsolete The Sonoff MINI is a WiFi-controlled universal switch, built with the ESP8266 chip. It works with the voltage of 230V and makes it possible to control any device anywhere in the world. Thanks to its size it is very mobile and fits in most power supplies. Code WS001
Flat Cable 1m AWG28 1.27 10 Pins Colors The cables are in 10 different colors Flat Cable 1m AWG28 1.27 10 Pins Colors features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0003 Available Regular price €3.49 -€0.51 Price €2.98
Sonoff BasicR2 WiFi Wireless Smart Switch SONOFF BasicR2 v2.2 Intelligent Switch offers you perfect intelligence control solutions for your home or workplace.By using the wireless control of the free "eWeLink" application, it helps simplify your life so easily.You can check the status of your appliance at any time and in any place, and control it by simply clicking on your smartphone or tablet through APP eWeLink, without limitation of time and distance. WI-FI Intelligent Remote Control Switch Sonoff features: - Enclosure material: Flame retardant ABS- Security: WPA / WPA2- Power supply: 90 - 250V- Max. Current: 10A- Max. Power: 2200W,- Establish schedules for automatic control: - It has unique, repetitive and countdown timers that you can use to control the on /> Code W0085 Last items in stock Regular price €8.99 -€1.00 Price €7.99
Sonoff TH16 - obsolete Sonoff TH16 is a WiFi-controlled universal switch. It works with the voltage of 230V up to 3500W and makes it possible to control any device anywhere in the world. The module can integrate humidity sensors Si7021 or AM2301 (can be purchased separately) or temperature sensor DS18B20 Code WS002
Flat Cable 1m AWG28 1.27 Gray 10 Pins Flat Cable 1m AWG28 1.27 Gray 10 Pins features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0002 Available Price €2.50
Sonoff T0EU1C-TX Gang 86 Smart WiFi Wall Touch Switch WiFi Smart Wall Switch Sonoff T1 Gang 86 Smart WiFi RF APP Touch Control Wall Light Switch features:works with Amazon Alexa, Google Assistant DIY Smart Home, Nest via iPhone Android. Code W0089 Available Regular price €19.90 -€1.91 Price €17.99
Sonoff 4CH R2 Sonoff 4CH is a 4 channel WiFi switch allowing control of 4 devices at the same time. It is a very similar device as Sonoff Basic, nonetheless extending Basic's functionality to more than 1 device. The devices can be controlled either by switches as provided on the 4CH box or by eWeLink application as with any other Sonoff product Code WS003 ✗ Out-of-Stock Price €24.99
Sonoff POW R2 - obsolete POW provides yet another great functionality of measuring power consumption. Remote switch POW R2 works pretty much the same way as Basic just with added functionality of controlling and documenting power consumption. As with all the Sonoff products it works with eWeLink making it pretty much compatible with any larger smart home ecosystem. Code WS004
Cable Silicona SIF 0.5mm2 Cu -50...+180°C Black flexible - roll 100m Flexible multi-conductor (stranded) SIF type flexible copper cable with silicone insulation. Conductor; silicone; SIF; 1 conductor; Cu; 0.50mm2; black; silicone; halogen free; heat resistant; -50...+180°C; 300/500V; 100m coil; Lappkabel; RoHS; OLFLEX HEAT 180 SIF; 2.1mm; 1x0.50mm2. Code K0101 Available Price €69.95
Silicone Cable Li2G 0.5mm2 10A 1kV -50÷180°C Black Flexible Double silicone insulated cables. Extremely flexible. The inner insulation is white which makes it easy to see if there is any damage. Resistant to low and high temperatures. Ideal for measuring cables used for dangerous voltages. Code K0109 Available Price €2.85
Sonoff 4CH PRO R3 Sonoff 4CH is a 4 channel WiFi switch allowing control of 4 devices at the same time. It is a very similar device as Sonoff Basic, nonetheless extending Basic's functionality to more than 1 device. The devices can be controlled either by switches as provided on the 4CH box or by eWeLink application as with any other Sonoff product Code WS005 ✗ Out-of-Stock Regular price €36.99 -€3.00 Price €33.99
Silicone Cable Li2G 0.5mm2 10A 1kV -50÷180°C Red Flexible Double silicone insulated cables. Extremely flexible. The inner insulation is white which makes it easy to see if there is any damage. Resistant to low and high temperatures. Ideal for measuring cables used for dangerous voltages. Code K0108 Available Price €2.85
Sonoff BasicR3 Wi-FI remote control switch SONOFF Basic R3 Intelligent Switch offers you perfect intelligence control solutions for your home or workplace. By using the wireless control of the free "eWeLink" application, it helps simplify your life so easily. Code WS006 ✗ Out-of-Stock Price €8.99
Cables for Multimeter 2 Cables for 1M Multimeter Meter features: - Voltage 1000V, 10A CAT III- Total length 110cm- Red and black colors Code K0012 Available Price €3.95
Sonoff S26 - 2200W Sonoff S26 is the freshest version of an intelligent socket made for EU power standards. It is extremely user friendly - you only need to plug it in your socket and pair with your device and it should run! Code WS007 ✗ Out-of-Stock Price €16.99
Sonoff LED strip amplifier and power adapter KZ1202000 RGB This LED power amplifier with a Sonoff power adapter is designed to extend existing Sonoff LED lighting systems. With this signal amplifier, you have the option to extend your Sonoff LED strip system, as the included power adapter provides sufficient power. Code WS011 Last items in stock Price €9.49
10x Female-Female Cables 20cm Jumpers Dupont 2,54 10x Female-Female Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have female header contacts at either end -Compatible with male connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0005 Available Price €1.69
Sonoff Spider Z Smart Wifi RGB LED Strip Controller - support Alexa The perfect solution for not worrying about the length required on your RGB LED strip, now with a WiFi driver compatible with the eWeLink APP and voice assistants like Google Home or Alexa. Also includes a 24-key IR remote control. You will be able to turn on and control your strip lights anytime and anywhere, and control it with just a click on your smart phone or tablet via APP eWeLink, or voice assistants, without time and distance limitations. Code WS012 ✗ Out-of-Stock Price €11.49
10x Male-Male Cables 20cm Jumpers Dupont 2,54 10x Male-Male Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have male header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0007 Available Price €1.69
Sonoff IFAN03 + Control - WiFi+RF intelligent ceiling Fan controller The Sonoff IFan03 is an intelligent controller for ceiling fans with light that allows us to control it intelligently, either by the eWeLink application, by means of 433MHz RF control or by voice assistants such as Alexa or Google Home. Create your own scenes, turn on the light and/or the fan and adjust its speed, programming it to the hours you want. Code WS013 ✗ Out-of-Stock Price €24.90
10x Female-Male Cables 20cm Jumpers Dupont 10x Female-Male Cables 20cm Jumpers Dupont features: -Length: 20cm-Quantity: 10 cables-Connectors have male and female header contacts at either end-Compatible with male and female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0009 Available Price €1.69
Sonoff S55 - Wi-Fi Smart Waterproof Socket This intelligent WiFi plug can be controlled by the eWeLink APP, with which you can create routines and scenes, or by voice assistants such as Alexa or Google Home. Its IP55 Waterproof protection makes it ideal for outdoor functions in your home or workplace. Code WS014 ✗ Out-of-Stock Regular price €18.89 -€2.90 Price €15.99
USB to Micro USB On/Off Switch for Arduino Charger Cable It has an ON / OFF switch that will cut off power when you don't need it. USB to Micro USB On/Off Switch Arduino Charger Cable features: - Black color - Length: 150cm - Maximum current 1A Code K0054 Available Price €2.85
Sonoff Slampher - WiFi and RF 433MHz Intelligent Light Support Adapter This E27 bulb adapter will allow you to control its on and off by WiFi and to control your lamps by the free eWeLink APP, with which you can create routines and scenes, by IFTTT, or also by voice assistants such as Alexa or Google Home. Code WS015 Available Price €14.99
SONOFF L1 - Intelligent LED strip light WiFi IP65 5M Intelligent 5 metre LED strip by WiFi and RF, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. Code WS016 ✗ Out-of-Stock Price €36.99