Module Relay 12V Light sensor LDR
  • Module Relay 12V Light sensor LDR

Module Relay 12V Light sensor LDR

RL019

This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold.
The optical isolation relay effectively protects the chip and ensures better performance.
This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1
- Supply voltage: 12VDC
- Output load capacity: 250V 10A AC / 30V 10A DC
- Relay activation current: & gt; 100mA
- Insulation: Yes
- Indicator LED: Green and Red
- PCB size: 5x2.6 cm / 1.96x1.02 "

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Module Relay 12V Light sensor LDR description

This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. < br /> Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold.
The optical isolation relay effectively protects the chip and ensures better performance.
This module is used for light detection, brightness detection , control of lamps and automatic equipment.

Characteristic:

- Channels: 1
- Supply voltage: 12VDC
- Output load capacity: 250V 10A AC / 30V 10A DC
- Relay activation current: & gt; 100mA
- Insulation: Yes
- Indicator LED: Green and Red
- PCB size: 5x2.6 cm / 1.96x1.02 "

Data sheet

Voltages
12V
Número de canales
1

Customers who bought this product also bought

DC 30A Analog Panel Ammeter 0 to 30A

DC 30A Analog Panel Ammeter 0 to 30A features:
- DC 30A Analog Ammeter Panel Current Meter AMP 0-30A
- Type: AMP analog meter
- Range of scale: DC 0-30A
- Accuracy: Class 2.5
- Size: 82mm fi
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

H0109

Price €2.39

Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length

Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Type of laser: cross
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

M0041

Price €3.26

W1209 12V DC Thermostat Digital Temperature Controller Switch

W1209 12V DC Thermostat Digital Temperature Controller Switch features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50 -110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measurement accuracy: 0.1 ° C
- Refresh rate: 0.5 s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Power of output: 10A relay
- Sensor probe: NTC waterproof sensor (10K 0.5%)
- Environmental requirements: -10 ~ 60 ° C Humidity 20% -85%
- Dimensions: 48 x 40 mm

M0102

Price €3.13

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL001

Price €1.98

UNO Board CH340 clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: USB female Type B

B0011

Regular price €6.19 -15% Price €5.26

LED matrix module 32x8 red MAX7219 SPI

Voltage Sensor Module 0.02445V ~ 25V. When the module is powered by 5V the voltage detection does not exceed 25V, and when the module is powered with 3.3V the voltage detection does not exceed 16.5V. Arduino Compatible.

M0192

Price €6.57

Related articles on blog

€2.88

2,88 tax excl.

1
15 items
Price €2.88

Order until 4pm we will send today
30 days return