Components and sensors

2x Electronic Clips Crocodile 2x50mm Black + Red features:
- Length: 50mm
- Quantity: 2 units

2x Banana Connector Diameter 4mm Red and Black features:
- Length: 40 mm
- Diameter plug: 4mm
- Quantity: 2 units

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

Relay SRD-05 DC-2P 5V 10A SPDT features:
- Supply voltage: 5V
- Output Current: 10A
- For power switching with 5V DC signals - Microcontroller, Arduino, Electronica

2x IDC 10 female connector for flat cable AWG 1.27 features:
- Number of pins: 10
- Pin Pitch: 2.54mm
- Flat Cable Pin Pitch: 1.27mm
- Quantity: 2 units

Alligator clip connectors Red and  Black.

1 Channel 5V Relay Module.
This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL).
Relay Module 1 Channel 5V 10A features:

- Channel: 1
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- LED indicator
- Dimensions: 30x 54mm

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

Ideal to power your Arduino board through the power input.
Adapter Battery 9V 6F22 Jack Connector DC features:
- Cable 7cm long
- Battery connector 9V, 6F22
- Male connector DC 5.5 / 2.5

Relay Module DC 12V 10A 1 Channel Low/High Trigger features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)

Relay Module DC 5V 10A 2 Channel Low/High Trigger features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- It has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

3.5mm Mini Jack Chassis Panel Mount Earphones Stereo Front Connector features:
- Quantity: 1 unit
- 3.5mm jacks for mounting on flat surfaces
- 3-pole connectors suitable for use with headphones and other stereo audio equipment
- Termination method: welding
- Color: gold / black

Plastic Housing DB9 DB15 Cover Connector RS232 D-SUB features:
- Plastic housing for DB9 DB15 connector

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

Characteristic:
- Channels: 4 (independent protected by Optocouplers)
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Isolation: Yes
- Indicator LED: For each channel
- Dimensions: 54x 72mm
- 5V Optocoupled 4-Channel Relay Module
- This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
User manual for the remote control + 4-channel 315 MHz IC2262 receiver:
- Relay Module Programming 5V 10A 4 Channel with remote control + 4 channel receiver

Banana Connector Plug 4mm Male Red features:
- Test Plug Arduino Robot PCB

Crocodile Clip 30A 2x75mm Black + Red features:
- Length: 75mm
- Handle length: 38mm
- Isolated
- Quantity: 2 units

This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, from the TTL 8 Channel High Trip 5V 10A Relay Module features:
- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage Vcc: 5Vdc
- Output Current: 10A
- High trip min 3.3V input IN1. ..IN8
- Relay activation current: 5 ~ 10mA
- Isolation: Yes
- Indicator LED: For each channel
- Dimensions: 55x 139mm
- Weight: 120g
COM GND jumper input: connects GND optocouplers and GND of the circuit

5V Relay Module with 8 opto-coupled channels.
This module can be directly controlled by the microcontroller ( Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL).
8 Channel Arduino 5V 10A Relay Module features:

- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Isolation: Yes
- LED indicator: For each channel
- Dimensions: 54x 135mm

10x Ring Terminals Isolation features:
- M3.5 Cable connector 0.5-1.5 mm2
- Max current 19A
- Isolated
- Quantity: 10 units

Terminals Fork Isolation features:
- M3.5 Cable connector 0.5-1.5 mm2
- Max current 19A
- Isolated
- Quantity: 10 units

This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL, PLC output).
16 Channel Relay Module 12V 10A AVR features:
- Channels: 16 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 3mA
- Insulation: Yes
- Low shot: 0-2V
- LED indicator: For each channel
- Dimensions: 18x 9x 2cm

This module is a three way switch ( COM, NO and NC ) that uses the intensity of the ambient light to control directly the load at the output. Its adjustment potentiometer allows changing the sensitivity and setting the start threshold of the relay. The relay is energized when it is darker than the threshold.

Female Strip 40 Short Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 1 unit of strips of 40 female pins each

This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold.
The optical isolation relay effectively protects the chip and ensures better performance.
This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1
- Supply voltage: 12VDC
- Output load capacity: 250V 10A AC / 30V 10A DC
- Relay activation current: & gt; 100mA
- Insulation: Yes
- Indicator LED: Green and Red
- PCB size: 5x2.6 cm / 1.96x1.02 "

5x Female Strip 20 Short Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 5 units of strips of 20 female pins each

The DC-DC 25A solid state relay has a 3-32VDC input and a 6-60VDC output. It has a maximum load capacity of 25A.
It has a long operating life and high reliability, a compact size. This relay switches very quickly. Fotek SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output 

5x Strip 16 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 5 units of strips of 16 female pins each

The DC-AC 12A solid state relay has a 3-32VDC input and a 24-380VAC output. It has a maximum load capacity of 12A.
It has a long operating life and high reliability, a compact size. This relay switches very quickly. Solid State Relay SSR-25 DA 12A DC-AC Output 24V-380VAC 

10x Strip 8 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 10 units of strips of 8 female pins each

10x Strip 6 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 10 units of strips of 6 female pins each

The multifunctional relay control module, FRM01, is designed for customers with different synchronization and control needs.
The FRM01 is controlled by the STM8S003F3P6 microcontroller and has 18 different functions.
Each function can be customized to meet customer needs in a variety of time and power control applications.
The FRM01 is equipped with a high-quality power relay, a high-power voltage transistor, red and blue LED indicators, an LED display on a double-sided PCB board.
The output of the board is driven by a high quality power relay capable of controlling the AC and DC loads. Timer Relay Module FRM01 features:
- Operating voltage: 12 VDC
- 4 buttons: SET, SWI, NUM +, NUM-
- Operating temperature: -20 °C - + 60 °C

Relay 5VDC SPDT 5VDC JQC-3FF for industrial applications, automation and process control and consumer electronics. Relay SPDT JQC-3FF 5VDC-1ZS features:
- Coil voltage: 5 VDC,
- Coil power: 360 mW,
- Switching capability:
 - 10A @ 277 VAC
 - 12A @ 125 VAC
- Operating time: between 5ms and 10ms,
- Plastic sealed and flux proofed types available,
- Environmental friendly product (RoHS compliant),
- Working temperature: -40ºC to 70ºC,
- Outline dimensions: 19.0 x 15.2 x 15.5 mm.

15x Strip 5 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 15 units of strips of 5 female pins each

15x Strip 4 Short Female Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 15 units of strips of 4 female pins each

W1209 12V DC Thermostat Digital Temperature Controller Switch features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50 -110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measurement accuracy: 0.1 ° C
- Refresh rate: 0.5 s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Power of output: 10A relay
- Sensor probe: NTC waterproof sensor (10K 0.5%)
- Environmental requirements: -10 ~ 60 ° C Humidity 20% -85%
- Dimensions: 48 x 40 mm

W1209 DC 12V Thermostat + Transparent Box Temperature Controller features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50-110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measure accuracy: 0.1 ° C
- Refresh rate: 0.5s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Output power: 10A relay
- Probe sensor: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 ° c Humidity 20% -85%
- Dimensions: 48 x 40mm

3-Pin Female PCB Header Short Strip features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through

The Sonoff MINI is a WiFi-controlled universal switch, built with the ESP8266 chip. It works with the voltage of 230V and makes it possible to control any device anywhere in the world. Thanks to its size it is very mobile and fits in most power supplies.

Dupont Connector 2.54mm Female features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

SONOFF BasicR2 v2.2 Intelligent Switch offers you perfect intelligence control solutions for your home or workplace.
By using the wireless control of the free "eWeLink" application, it helps simplify your life so easily.
You can check the status of your appliance at any time and in any place, and control it by simply clicking on your smartphone or tablet through APP eWeLink, without limitation of time and distance. WI-FI Intelligent Remote Control Switch Sonoff features:
- Enclosure material: Flame retardant ABS
- Security: WPA / WPA2
- Power supply: 90 - 250V
- Max. Current: 10A
- Max. Power: 2200W,
- Establish schedules for automatic control:
      - It has unique, repetitive and countdown timers that you can use to control the on />

Dupont Connector 2.54mm Male features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

Sonoff TH16 is a WiFi-controlled universal switch. It works with the voltage of 230V up to 3500W and makes it possible to control any device anywhere in the world. The module can integrate humidity sensors Si7021 or AM2301 (can be purchased separately) or temperature sensor DS18B20

WiFi Smart Wall Switch Sonoff T1 Gang 86

Smart WiFi RF APP Touch Control Wall Light Switch features:
works with Amazon Alexa,  Google Assistant DIY Smart Home, Nest  via iPhone Android.

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Connector Jack 2.1x5.5mm Power Supply DC Male features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

Sonoff 4CH is a 4 channel WiFi switch allowing control of 4 devices at the same time. It is a very similar device as Sonoff Basic, nonetheless extending Basic's functionality to more than 1 device. The devices can be controlled either by switches as provided on the 4CH box or by eWeLink application as with any other Sonoff product

POW provides yet another great functionality of measuring power consumption. Remote switch POW R2 works pretty much the same way as Basic just with added functionality of controlling and documenting power consumption. As with all the Sonoff products it works with eWeLink making it pretty much compatible with any larger smart home ecosystem.

Inlet Module Plug Fuse Switch 220V C14 3D Printer features:
- Voltage and current of 10A, 250V AC
- Plug type - 3 pins IEC320 C14
- Color of the red switch
- Diameter holes 40 mm
- Distance between holes 39mm
- Size 47 x 27 mm
- Total size of 58 x 50 x 34 mm

Sonoff 4CH is a 4 channel WiFi switch allowing control of 4 devices at the same time. It is a very similar device as Sonoff Basic, nonetheless extending Basic's functionality to more than 1 device. The devices can be controlled either by switches as provided on the 4CH box or by eWeLink application as with any other Sonoff product

SONOFF Basic R3 Intelligent Switch offers you perfect intelligence control solutions for your home or workplace. By using the wireless control of the free "eWeLink" application, it helps simplify your life so easily.

Male 40 Pin Header 1x40 features: Type: Male, Insertion position: Vertical, Separation between pins: 2.54mm

Sonoff S26 is the freshest version of an intelligent socket made for EU power standards. It is extremely user friendly - you only need to plug it in your socket and pair with your device and it should run!

15x Strip 2 Short Female Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 15 units of strips of 2 female pins each

This LED power amplifier with a Sonoff power adapter is designed to extend existing Sonoff LED lighting systems. With this signal amplifier, you have the option to extend your Sonoff LED strip system, as the included power adapter provides sufficient power.

Jack Stereo 3.5mm Female Connector Chassis 5P features:
- Type: Stereo
- Welding connections
- 3.5 mm connector for PCB mounting

The perfect solution for not worrying about the length required on your RGB LED strip, now with a WiFi driver compatible with the eWeLink APP and voice assistants like Google Home or Alexa. Also includes a 24-key IR remote control.

You will be able to turn on and control your strip lights anytime and anywhere, and control it with just a click on your smart phone or tablet via APP eWeLink, or voice assistants, without time and distance limitations.

5x Strip Simple Row Male 40 Pins Header Various Colors features:
- Type: Male
- Insertion position: Vertical
- Separation between pins: 2.54mm
- Quantity: 5 strips of 40 pins Male each

The Sonoff IFan03 is an intelligent controller for ceiling fans with light that allows us to control it intelligently, either by the eWeLink application, by means of 433MHz RF control or by voice assistants such as Alexa or Google Home.

Create your own scenes, turn on the light and/or the fan and adjust its speed, programming it to the hours you want.

20 Mini Jumpers 2.54mm Short Circuit Board PCB features:
- Mini standard 2.54mm jumpers for making short circuit bridges on printed circuit boards, hard disks, PCBs, etc.