5x Female Strip 20 Short Pins

Rocker Switch 3A 250V On/Off SPST features:
- AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch
- Rocker switch; Type: On/Off (SPST)
- Control on and off SPST and 2 terminals
- Voltage and Current: AC250V, 3A
- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)
- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)
- Black

Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features:
- Controller CP2102
- 5 pins: 3.3v, 5.0v, TxR, RxD, GND
- Standard USB type to male and 5 pin TTL connector
- 3 Status LEDs: Power, RX and TX
- USB 2.0 specification with 12Mbps maximum speed

IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features:
- Based on the PCF8574A chip
- Power: 5V
- Supports I2C Protocol
- A potentiometer for regulate contrast
- Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL
- Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32

It consists of a 16-character, 2-row display.
The display is compatible with the HD44780 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features:
- LCD screen , 16 characters and 2 lines
- 5V power supply
- HD44780 compatible controller
- Backlit blue background, white letters
- Include an adjustable contrast pin
- Dimensions (mm): 80 x 36 x 12

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3000mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3000mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.5A
- recommended maximum discharge current 4.5A
- maximum charge voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

Voltage Regulator 2% 5V 1.5A TO-220 L7805ACV features:
- Output Type: Fixed
- Voltage Output: 5V
- Manufacturer: ST Microelectronics
- Current Output: 1.5A
- Max input voltage: 35V
- Input voltage min .: 5V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- 2% output voltage tolerance (A version)
- Quantity: 1 unit

Relay Module DC 12V 10A 1 Channel Low/High Trigger features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)

Characteristic: -Low voltage electric cables
-Normal: EN 50525-2-31
-Number of conductors: 1x0.35mm2
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer diameter: 2.4mm

-Length 1m