3D Printers

Linear Bearing LM12UU 12mm Ball Bearing for 3D Printer RepRap Prusa features:
- Reprap Prusa 3D Printer
- Measurements:
* Internal diameter 12mm
* External diameter 21mm
* Length 30mm
- Enclosure material: chrome-plated anti-corrosion steel
- Inner support material: technical plastic

Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance features:
- E3D Long Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 3.0mm
- Cartridge heater: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable

Bowden connector - a pneumatic connector with a 9.7mm screw and 1.75 cm length for the 6mm tube of 3D printer couplers for 1.75mm filament. 

Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features:
- E3D Short Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 3.0mm
- Cartridge heater: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable

Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features:
- E3D Long Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 1.75mm
- Heater cartridge size: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable
- Heater size: 6 x 20mm

Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC
Characteristic:
- Diameter: 0.2 / 0.3 / 0.4 mm
- Shank diameter approx. 3,2mm
- Total length approx. 38mm
- Material: Steel
- Quantity: 10 units
- High quality drill bits for making custom nozzles or cleaning block nozzles
- 3D printer bits - Drilling and cleaning of nozzles - 0.2 0.3 0.4 mm - RepRap

Linear Bearing LM8UU 8mm Ball Bearing for 3D Printer RepRap Prusa features:

- Measurements:
* Internal diameter: 8mm
* External diameter: 15mm
* Length: 24mm
- Enclosure material: anti-corrosion chrome steel
- Inner support material: technical plastic

Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features:
- E3D Short Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 1.75mm
- Cartridge heater: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable

Flexible Coupler 5mm/5mm Z-axis CNC 3D Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 5mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm

Sensor used to measure the temperature of the hotend or hot bed of your 3D printer
Characteristic:
- NTC Thermistor 100 K 3950
- Impedance: 100 K (25º of Temperature)
- Accuracy: 1%
- Sensor Diameter: 1.8 mm
- Cable Length: 1 m
- Cable: AWM UL 3398 150 ° C 300V
- Ready to be installed and used. Fully insulated
- Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS

3x Heat Sink Aluminium Adhesive A4988 DRV8825 features:
- Package includes: 3x Heatsink with adhesive
- Ideal for DRV8825, A4988 etc
- Dimensions: 9 x 9 x 5mm

- Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable
Characteristic:
- Voltage 12V
- Power 40W
- Material: Ceramic y Stainless steel
- Cartridge diameter 6 mm
- Cartridge length 20 mm
- Cable length approx. 1000 mm

- Inner diameter: 12mm
- Quantity: 1 unit

Characteristic: - Voltage 24V
- Power 40W
- Material: Ceramic and Stainless Steel
- Cartridge diameter 6 mm - Cartridge length 20 mm
- Cable length approx. 1000 mm

- Inner diameter: 8mm
- Quantity: 1 unit

Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features:
- This extruder is ready to mount and print
- PC4-M6 bowden pneumatic connector
- 12V 2-wire 40x40mm fan
- Metal fan cover
- MK8 heat sink
- MK8 aluminum extruder
- PAP Nema17 3.25V 1.3A motor with cable
- Capable of loading with 4.48 kg / cm

- Measurements:
- Inside diameter D: 4mm
- Outside diameter D: 13mm
- Width - dimension B: 5mm
- Quantity: 1 unit

- Measurements:
Inside diameter d: 5mm
Outside diameter D: 14mm
Width - dimension B: 5mm
- Quantity: 1 unit

Assembled MK8 Extruder Direct for Printer 3D features:
- This extruder is ready for assembly and printing
- 0.4mm nozzle
- NTC 100k 3950 thermistor with cable
- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable
- Filament stud 1.75mm
- Fan 12V 2 cables 40x40mm with metal protection
- MK8 heat sink
- MK8 aluminum extruder
- PN Nema17 3.25V 1.3A motor with cable
- Able to load with 4.48 kg/cm

Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features:
- 3D Printer Extruder
- 0.4mm Nozzle
- 100k 3950 NTC thermistor with cable
- MK8 heater block with 12v / 40W thermal ceramic resistance with cable
- 1.75mm filament stud M6x30mm

- Measurements:
* Inner diameter D: 5mm
* Outside diameter D: 14mm
* Width - dimension B: 5mm
* Dimension C1: 1mm
* Dimension D1: 16mm
- Quantity: 1 unit

This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface.
It can greatly improve the printing precision of your 3D printer.
Its features: are simple, smart and precise.
It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch.

Self-leveling sensor BLtouch 3D printer features:
- Supply voltage: 5V.
- Supply current: 15mA
- Max. Current: 300mA
- Len3Dh cable: 150mm
- Wiring:
- 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal)

- Measurements:
* Inner diameter D: 4mm
* Outside diameter D: 13mm
* Width - dimension B: 5mm
* Dimension C1: 1mm
* Dimension D1: 15mm
- Quantity: 1 unit

The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer.

This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block.

4x M3 x45 Screw Kit 3D Printer Leveling Spring features:
- 4x M3 x45mm steel screw and knurled nut
- 4x Leveling Springs, Hot Bed, 3D printer Extruder
* Outside diameter: 7.5mm
* Inner diameter: 5mm
* Length: 20mm

Extruder Kit MK8 Aluminium 1.75mm Strand 3D Printer Reprap Prusa features:
- MK8 1.75mm filament extruder kit
- Includes:
* MK8 extruder complete push system
* Square part dimensions: 40x40mm
* Part dimensions - handle L: 44x28mm

Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC
Characteristic:
- Diameter: 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.2 mm
- Shank diameter approx . 3.2mm
- Total length approx. 38mm
- Material: Steel
- Quantity: 10 units

Nozzle Throat 1.75mm 3D Printer PTFE features:
- Compatible with 1.75mm filament
- Inner diameter: 2 mm
- Exterior: 6 mm (M6 thread)
- Total length: 30 mm
- Comes with Teflon PTFE core 26mm long
- Outside diameter: 4 mm
- Application: makerbot 3D printer extruder
- Material: Stainless steel

- Measurements:
Inner diameter d: 8mm
Outside diameter D: 22mm
Width - dimension B: 7mm
- Dimension C1: 1,5mm
- Dimension D1: 25mm
- Quantity: 1 unit

The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts.

5x Bearing 608ZZ 8mm RepRap 3D Printer features:

- Ball Bearing 3D Printer Reprap Prusa
- Measurements:
Inside diameter D: 8mm
Outside diameter D: 22mm
Width - dimension B: 7mm
- Quantity: 5 units

T8 R2 80cm Spindle Kit with Bearing Support, Nut and Coupler features:
- With bearing bracket, nut, coupler for CNC 3D Printer
- T8 spindle
- Type: Trapezoidal screw
- Diameter: 8mm
- Tooth distance: 2mm
- Lengths: 800 mm
- Coupler 5mm / 8mm

Support for 30mm Fan E3D V6 3D Printer features:
- Support for 30mm fan
- Compatible with E3D V6
- For hotels with 22mm diameter
- E3D V6 Cooling Fan Cover 3D Printer
- Unique design surrounded, close contact with the radiator, gather wind around the radiator so that the heating block can work normally

4x Springs Leveling Hot Bed 3D Printer features:
3D Springs printer Bed level extruder for RepRap Prusa Mendel - A strong spring for 3D Printer Extruder
- Excellent elasticity, resistance to fatigue
- Nickel plating, corrosion resistance, high hardness
- Material: Carbon steel
- Outside diameter: 7.5mm
- Inner diameter: 5 mm
- Spring height: 20 mm
- Quantity of the ring: 9 rings
- Surface treatment: Nickel-plating

2x Spring Tensioning Strap Printer features:
- Use with 6mm strap
- Timing Belt GT2 Tensioner Spring for RepRap Prusa Mendel 3D printer
- Fits 3D printer timing belt system
- Fits belt width: less than or equal to 6mm
- Constant force to keep belt reasonably tight to avoid losing steps, skipping steps or unwanted movements
- Material: Metal
- Silver color
- Size: 12 x 12 x 8 mm (length x width x height)
- Quantity: 2 units

Pulley GT2 20 Teeth 8mm Bore Aluminum 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 16mm
- Inner hole: 8mm
- Use with strap: 6mm and 6.35mm
- Toothed width 7mm
- Quantity: 1 unit
- Ideal for fixing on the axis of the motors of your 3D printer

Flexible Coupler 5mm/8mm Z-axis CNC 3D Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to an 8 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 8mm

Linear Bearing LM16UU 16mm Ball Bearing for 3D Printer RepRap Prusa features:

- Reprap Prusa 3D Printer

- Measurements:
* Internal diameter 16mm
* External diameter 28mm
* Length 30mm
- Enclosure material: chrome-plated anti-corrosion steel
- Inner support material: technical plastic

Pulley GT2 20 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 18mm
- Inner hole: 5mm
- Use with strap: 6mm and 6.35mm
- Ideal to fix on the axis of the motors of your 3D printer

Pulley GT2 36 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 36
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 25mm
- Inner hole: 5mm
- Use with strap: 6mm and 6.35mm
- Ideal to fix on the axis of the motors of your 3D printer

Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 16
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 13mm
- Inner hole: 5mm
- Use with strap: 6mm
- Quantity: 1 unit of 16 teeth GT2 pulley, 6mm wide and 2 studs
- Ideal for fix on the axis of the motors of your 3D printer

GT2 Strap Kit 2m + 2x Pulley GT2 16 Teeth 6mm features:
- Number of teeth: 16
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 13mm
- Inner hole: 5mm
- Use with strap: 6mm
- GT2 strap made of rubber with fiberglass reinforced
- Length 2m
- Width: 6mm
- Belt height: 1.38 mm Ideal to fix on the axis of the motors of your 3D printer.

- Inner diameter: 16mm
- Quantity: 1 unit

1m 6mm GT2 strap 3D printer features:
- GT2 rubber strap with fiberglass reinforced
- Length: 1m
- Width: 6mm
- Strap height: 1.38 mm

Trapezoidal nut 2mm pitch for spindle diameter 8mm Characteristic:
- Diameter: 8mm - Toothed distance: 2mm - A 360º turn is equivalent to a 2mm linear advance
- Quantity: 1 unit

T8 Spindle 50cm with Trapezoid Nut R2 features:
- Type: Trapezoidal Screw
- Diameter: 8mm
- Tooth distance: 2mm
- Lengths: 500 mm
- Quantity:
* Nut 1 unit
* Spindle 1 unit

T8 Spindle 80cm with Trapezoid Nut R2 features:
- Type: Trapezoidal Screw
- Diameter: 8mm
- Tooth distance: 2mm
- Lengths: 800 mm
- Quantity:
* Nut 1 unit
* Spindle 1 unit

Bowden connector - a pneumatic connector with an M5 screw and 1.75 cm length for the 4mm tube of 3D printer couplers for 1.75mm filament. 

T8 R2 50cm Spindle Kit with Bearing Support, Nut and Coupler features:

- With bearing bracket, nut, coupler for CNC 3D Printer
- T8 spindle
- Type: Trapezoidal screw
* Diameter: 8mm
* Tooth distance: 2mm * Lengths: 500 mm
- Coupler 5mm / 8mm
* Material: Aluminum alloy

Bowden connector - a pneumatic connector with a 6 mm screw and 1.75 cm length for the 4mm tube of 3D printer couplers for 1.75 mm filament. 

Bowden connector - a pneumatic connector with a 9.7mm screw and 1.75 cm length for the 4mm tube of 3D printer couplers for 1.75mm filament. 

Pulley GT2 40 Teeth 6mm Aluminium 3D Printer Reprap CNC features:
- Number of teeth: 40
- Pitch: 2mm
- Material: Alloy aluminum
- Outside diameter: 27mm
- Inside hole: 5mm
- Use with strap: 6mm and 6.35mm

Pulley GT2 60 Teeth 5mm Aluminium 3D Printer Reprap CNC features:
- Number of teeth: 60
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 44mm
- Inner hole: 5mm
- Use with strap: 6-7mm GT2 Ideal to fix on the axis of the motors of your 3D printer, CNC machine.

SCS16UU is aluminum block shell. LM16UU linear bearing built-in.

It's a slide block for 16mm smooth rods.

Flexible Coupler 6mm/8mm CNC 3D Printer Shaft features:
- Flexible coupling in high quality aluminum with which you can join Nema 17, 6mm stepper motors to an 8 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 8mm

High quality flexible aluminum coupler, so you can join Nema 17, 6.35mm stepper motors to an 8mm threaded rod. They incorporate 4 captive screws so you can perfectly fix the couplings to the rod. Flexible Coupler 6.35mm/8mm shaft features:
- Material: Aluminum alloy
- Coupler height ( L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6.35mm / 8mm - Quantity 2 units

High quality aluminum flexible coupler, so you can join Nema 17, 8mm stepper motors to an 8mm threaded rod. They incorporate 4 screws studs so you can perfectly fix the couplings to the rod. Flexible Coupler 8mm/8mm shaft features:
- Material: Aluminum alloy
- Coupler height (L ): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 8mm / 8mm - Quantity - 2units

High quality flexible aluminum coupler, so you can join Nema 17, 8mm stepper motors to a 10mm threaded rod. They incorporate 4 screws captive so you can perfectly fix the couplings to the rod. Flexible Coupler 8mm/10mm shaft features:
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- External diameter: 19mm
- Shaft diameter: 8mm / 10mm - Quantity 2units

High quality flexible aluminum coupler, so you can join Nema 17, 6mm stepper motors to a 10mm threaded rod. They incorporate 4 screws studs so you can perfectly fix the couplings to the rod. Flexible Coupler 6mm/10mm shaft features:
- Material: Aluminum alloy
- Coupler height (L ): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 10mm - Quantity 2units

Flexible Coupler 5mm/6.35mm Z-Axis 3D CNC Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 6.35 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 6.35mm - Quantity 2units