Extruder Kit MK8 Aluminium 1.75mm Strand 3D Printer Reprap Prusa

RepRap Arduino Mega Pololu Shield (RAMPS) version 1.4 for 3D printer. RAMPS is a shield for the Arduino Mega - The outputs of the Arduino board are redirected to the motor drivers. To have the complete electronics for a 3D printer you need a RAMPS, an Arduino Mega and at least four stepper motor drivers

Mechanical End of Career CNC Ramps1.4 3D Printer features:
- Mechanical limit switch, Endstop
- 100% brand new and high quality
- 1A 125V AC switch - Cable length: 70cm
- PCB dimensions: 40mm x 15mm

Ideal for projects with ARDUINO you can use it with PIC, AVR, STM32.
Provides seconds, minutes, time and date, calendar up to the year 2100.
DS1302 Real Time Clock RTC Module AVR ARM PIC features:
- Chip: DS1302
- Power supply: 2V-5V
- Operating current: <2mA
- Dimensions: 44 x23 x 8mm
- Battery not included in this sale
- Connect the RTC to your Arduino
VCC -> Arduino + 3.3V
GND -> Arduino Gnd
CLK -> (SCLK_PIN)
DAT -> (IO_PIN)
RST -> (CE_PIN)

120x M3 Nylon Separator features:
- Hexagonal M3 made of nylon for screws and fastenings on PCB boards, model aircraft, DIY projects
- Can be used in prototyping and robotics projects
- Box dimension: 128x 66x 24mm
- Quantity: 120 units
- Color: white

The 28BYJ-48 has everything you need to start using stepper motors in your project. A stepper motor converts digital impulses into small movement steps. in one direction Characteristic: - Motor model: 28BYJ-48
- Motor phases: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per lap: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm
- Operating temperature: -45ºC to + 125ºC
- Motor cable length: 19cm
- Motor block diameter: 28mm
- Motor dimensions: 42mm x 32mm x 30mm

10x Female-Male Cables 20cm Jumpers Dupont features:
-Length: 20cm
-Quantity: 10 cables
-Connectors have male and female header contacts at either end
-Compatible with male and female connectors 2,54mm
-High quality and good working conditions
-Easy to install and use

Power supply DC 12V 16.7A 200W features:
- Supply voltage: 110 / 230V AC
- Output voltage: 12V DC - Output amperage: 16.7A
- Power at 12V: 200W
- Dimensions: 200mm x 99mm x 43mm
- IP20 ROHS CE

- It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features:
- Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATmega328
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O Pins: 14
- Analog input pins: 6
- DC current per I / O Pin: 40 mA
- DC Current per Pin 3.3V: 50 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328
- SRAM 2 KB - Atmega328