SparkFun WiFi Shield - ESP8266 The SparkFun WiFi ESP8266 Shield is a shield for Arduino R3 R3 board enabling internet connection. ESP8266 as you all know is a solid fundament for any IoT project an in this version it can be simply and easily put on your board. It is a great middle ground between the sole module and the development board such NodeMcu or WeMos. So if you need a relatively cheap and super reliable way to internet for your Arduino project - this is the shield for you! ESP8266 shield WiFi comes with an AT-command firmware, hence can be controlled by any UART. It works great with any Arduino R· layout. The shield doesn´t have the headers on. Code SP006 Last items in stock Price €21.99
SparkFun Altavoz Hamburger SparkFun Hamburger speaker is a high quality speaker in a small form and with even smaller price. You wouldn't believe you can get a quality product for less than 7€, right? Well, we couldn't believe that as well, but SparkFun makes that possible. Code SP022 ✗ Out-of-Stock Price €7.99
CO₂ Humidity and Temperature Sensor - SCD40 (Qwiic) This SparkFun CO2, humidity and temperature sensor incorporates Sensirion's new generation of SCD40 photoacoustic CO2 sensors for highly accurate environmental readings. The sensor is capable of detecting concentrations from 0 to 40000 ppm with high precision above 400-2000 ppm ±(50 ppm+5%). The SCD40 has an integrated CMos® temperature and humidity sensor for greater precision. Code SP097 Last items in stock Price €74.95
SparkFun IoT RedBoard - ESP32 Development Board SparkFun IoT RedBoard development board compatible with Arduino. It incorporates an ESP32 chip with a 32-bit dual-core Xtensa LX6 microprocessor with a clock frequency of up to 240 MHz. It enables WiFi and Bluetooth wireless communication, making it versatile for Smart Home and IoT projects. Code SP048 Available Price €45.49
Serial Enabled 16x2 LCD - White on Black 5V It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328. Code SP035 Last items in stock Regular price €36.99 -€10.00 Price €26.99
SparkFun ESP8266 Thing - Dev Board (wo headers) ESP8266 Thing Dev board from Sparkfun is a reliable, strong solution for IoT projects. The ESP8266 is a well-known WiFi controller from the boards such as NodeMcu and or WeMos. This board increases the reliability to maximum though. This version comes without headers. Code SP007 Last items in stock Price €25.99
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP038 Last items in stock Price €34.99
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
SparkFun Biomedical sensor pad set 10pcs This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel. This is not a medical device and is to be used for strictly educational purposes. Code SP029 Available Price €12.95
SparkFun micro:climate kit for micro:bit - v3.0 The SparkFun micro:Climate kit is a complete weather station kit that builds on the weather:bit carrier board with weather and soil moisture sensors, all powered by the micro:bit. board. Code SP073 Backorder Price €179.00
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Last items in stock Price €109.90
2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 features:- Type Output: fixed- Voltage Output: 3.3V- Manufacturer: Texas Ins- Output Current: 800mA- Max input voltage: 20V- Operating temperature: 0ºC to + 125ºC- Encapsulated: TO-220- Polarity: Positive- Quantity: 2 units Code T0012 Available Price €1.15
SparkFun Arduino IoT Weather Meter Kit The SparkFun Weather Meter Kit is a set of basic mechanical and electronic components to build a weather station. With the SparkFun Arduino IoT Weather Station kit in sight, you can create your own weather station. The kit allows monitoring via the Arduino Cloud, an IoT platform. Code SP100 Last items in stock Price €165.90
Precision Temperature Sensor TO-92 LM335 LM335Z-ST Precision Temperature Sensor TO-92 LM335 LM335Z-ST features:- Power supply from 5 to 30 Vdc- Connection through analog input- Temperature range from -40ºC to 100ºC- Linearity +10 mV / ºK- Accuracy of measurement: ± 2 ° C- Manufacturer: Texas Instruments Code S0120 Available Price €3.99
74LS86N DIP14 Input Logic NAND Gates O-Exclusive 74LS86N DIP14 Input Logic NAND Gates O-Exclusive features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 4.75 - 5.25 VDC- High level input voltage V (IH): 2 VDC- Low level input voltage V (IL): 0.8 VDC- Input clamp voltage V (IK): -1.5 VDC- High level output voltage V (OH): 2.4 - 3.4 VDC- Low level output voltage V (OL): 0.2 - 0.4 VDC - High level output current I (OH): -800 μA- Low level output current I (OL): 16 mA- Input current to VCC: 1 mA- High level input current I (IH): 40 μA- Low level input current I (IL): -1.6 mA- Short circuit output current I (OS): -55 - -18 mA Code T0048 Available Price €1.10
74HC00N DIP14 Input Positive Logic NAND Gates 74HC00N DIP14 Input Positive Logic NAND Gates features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 2 - 6 VDC- High level input voltage V (IH): 1.5 - 4.2 VDC- Low level input voltage V (IL): 0.5 - 1.8 VDC- Input voltage V (I): 0 - 6 VDC- Output voltage V (O): 0 - 6 VDC- High level output voltage V (OH): 1.9 - 5.9 VDC- Low level output voltage V (OL): 0.1 - 0.33 VDC - Leakage current I (I): ± 1000 nA- I (DC) supply current: 20 mA - Operating temperature: -40 ° C to 85 ° C- Storage temperature: -65 ° C to 150 ° C Code T0049 Available Price €1.10
74HC02N DIP14 Input Positive Logic NOR Gates Integrated Circuit 74HC02N DIP14 Input Positive Logic NOR Gates Integrated Circuit features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: NXP - Input voltage VCC: 2 - 6 VDC- High level input voltage V (IH): 1.2 - 4.2 VDC- Low level input voltage V (IL): 0.5 - 1.8 VDC- Input voltage V (I): 0 - 6 VDC- Output voltage V (O): 0 - 6 VDC- High level output voltage V (OH): 1.9 - 5.9 VDC- Low level output voltage V (OL): 0.1 - 0.33 VDC - Leakage current I (I): ± 1000 nA- Power supply current I (DC): 20 μA - Operating temperature: -40 ° C to 85 ° C- Storage temperature: -65 ° C to 150 ° C Code T0051 Available Price €1.10
CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers features: - Blister: DIP14,- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Positive Trigger VP (min): 2.9 - 9.4 VDC- Negative trigger VN (min): 1.9 - 7.3 VDC- Hysteresis voltage VH (min): 0.9 - 3.5 VDC- Input voltage VDD: -0.5 - 20 VDC- High level input voltage V (IH): 1.5 - 4.2 VDC- Low level input voltage V (IL): 0.5 - 1.8 VDC- High level output voltage V (OH): 5 - 10 VDC- Low level output voltage V (OL): 0.05 VDC - High level output current I (OH): -6.8 - -1 mA- Low level I output current (OL): 1 - 6.8 mA- Inactive current of device I (DD): 10 - 20 μA Code T0052 Available Price €1.10
CD4011BE DIP14 Quadruple Input Logic Gates CMOS NAND Integrated Circuit CD4011BE DIP14 Quadruple Input Logic Gates CMOS NAND Integrated Circuit features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - High level input voltage V (IH): 3.5 - 11 VDC- Low level input voltage V (IL): 1.5 - 4 VDC- High level output voltage V (OH): 5 - 15 VDC- Low level output voltage V (OL): 0.05 VDC - High level output current I (OH): -6.8 - -1 mA- Low level I output current (OL): 1 - 6.8 mA- Inactive current of device I (DD): 0.25 - 5 μA- Input current I (IN): ± 0.1 μA - Operating temperature: -55 ° C to 125 ° C- Storage temperature: -65 ° C to 150 ° C Code T0053 Available Price €1.10
CD40106BE DIP14 CMOS Hex Schmitt Triggers Inverter Integrated Circuit CD40106BE DIP14 CMOS Hex Schmitt Triggers Inverter Integrated Circuit features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Positive Trigger VP (min): 2.2 - 6.8 VDC- Positive Trigger VP (max): 3.6 - 10.8 VDC- Negative trigger VN (min): 0.9 - 4 VDC- Negative trigger VN (max): 2.8 - 7.4 VDC- Hysteresis voltage VH (min): 0.3 - 1.6 VDC- Hysteresis voltage VH (max): 1.6 - 5 VDC- Input voltage VDD: -0.5 - 20 VDC- High level input voltage V (IH): 1.5 - 4.2 VDC- Low level input voltage V (IL): 0.5 - 1.8 VDC- High level output voltage V (OH min): 5 - 15 VDC Code T0054 Available Price €1.10
Low power Bluetooth / Multi-standard SensorTag CC2650STK TI The new SensorTag IoT kit invites you to realize your product idea connected to the cloud. The new SensorTag now includes 10 low-power MEMS sensors in a small red package. And it's expandable with DevPacks to make it easy to add your own sensors or actuators. Connect to the cloud with low-power Bluetooth and Get your sensor data online in 3 minutes. The SensorTag is ready to go right away with an iOS and Android app, no programming experience to get started. The new SensorTag is based on The CC2650 Wireless MCU, which offers 75% less power consumption than previous Bluetooth low energy products. This allows the SensorTag to run on batteries, and offers years of battery life with a single coin cell battery. Code W0088 Backorder Price €45.00
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (with Headers) Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. it comes with headers attached Code SP001 Available Price €16.99
SparkFun Triple Axis Accelerometer Breakout - ADXL335 This accelometer is powered with 1.8 to 3.6V and consumes only up to 320 uA of current. The circuit fits on the small 18mm on 18mm board and is fully compatible with Arudino Code SP002 Available Price €21.99
SparkFun Triple Axis Accelerometer Breakout - LIS331 This board features and extremely low power LIS331HH accelerometer. The unit is a MEMS three axis linear accelerometer with a I2C- SPI serial interface enabling use with embedded applications. The range of measurement includes three options +-6g/+-12g/+-24g and enables datalogging with output rates fro 0.5 Hz to 1kHz. Check this and plenty of other accelerometers in our offering of both Sparkfun and other producers Code SP003 Available Price €18.95
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (wo headers) Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. it comes with headers attached It is a version without headers of a popular BOB-09868 from SparkFun. In our offer, we have a versuib with headers (SP0001) and with QWIC system (SP0005). Code SP004 Last items in stock Price €16.99
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (Qwiic) Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. It comes with QWIIC connectors Code SP005 Last items in stock Price €14.99
SparkFun ESP8266 Thing - Dev Board (with Headers) ESP8266 Thing Dev board from Sparkfun is a reliable, strong solution for IoT projects. The ESP8266 is a well-known WiFi controller from the boards such as NodeMcu and or WeMos. This board increases the reliability to maximum though. This version comes with headers. Code SP008 Last items in stock Price €21.99
SparkFun ESP32 Thing The SparkFun ESP32 thing is an upgrade to boards based on the popular ESP8266. What the 32 version has to offer on top? Well one of the largest upgrades is support for Bluetooth communications and nearly 30 I/O pins. Makes it pretty perfect for any IoT solution, right? Code SP009 Last items in stock Price €27.99
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies. Code SP021
SparkFun FTDI Basic Breakout - 5V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP023 Available Price €19.99
SparkFun FTDI Basic Breakout - 3.3V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP024 Available Price €19.99
SparkFun 16x2 SerLCD - Black on RGB 3.3V This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself. We have the same screen with a reverse color version, i.e. RGB on black with a reference of SP028 Code SP028 Last items in stock Regular price €27.99 -€10.00 Price €17.99
SparkFun 16x2 SerLCD - RGB on Black 3.3V This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself. We have the same screen with a reverse color version, i.e. black on RGB with a reference of SP028 Code SP027 Last items in stock Regular price €27.99 -€10.00 Price €17.99
SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic) This tiny little board features two chips from Maxim Integrated: MAX32664 and MAX30101. The 30101 Oximetry module is the sensor on board responding for both oximetry and heart rate sesnsing. The MAX32664 is equipped with a Cortex M4 handling algorithimc calculations, digital filtering and automatic gain control. The board comes with I2C and SparkFun has provided to it Qwiic connectors for ease of use. Code SP030 Last items in stock Price €52.99
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89
SparkFun GPS Breakout This small GPS breakout is yet another Qwiic module from SparkFun as per usual based on I2C - meaning that you can keep your serial port free for other applications. The board features XA1110 GPS module from GTOP and MediaTek MT3333 chipset already loaded with SparkFun firmware enabling clean and easy use of both ports. Code SP034 Last items in stock Price €65.99
Bus Pirate - v3.6a This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board. This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin. Code SP037 Last items in stock Price €39.99
74LS86N DIP14 Quadruple 2-Input Positive-AND Gates 74LS86N DIP14 Input Logic NAND Gates O-Exclusive features: - Blister: DIP14- Number of pins: 14- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 4.75 - 5.25 VDC- High level input voltage V (IH): 2 VDC- Low level input voltage V (IL): 0.8 VDC- Input clamp voltage V (IK): -1.5 VDC- High level output voltage V (OH): 2.4 - 3.4 VDC- Low level output voltage V (OL): 0.2 - 0.4 VDC - High level output current I (OH): -800 μA- Low level output current I (OL): 16 mA- Input current to VCC: 1 mA- High level input current I (IH): 40 μA- Low level input current I (IL): -1.6 mA- Short circuit output current I (OS): -55 - -18 mA Code T0077 Backorder Price €1.10
MyoWare Cable Shield This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person. Code SP072 Backorder Price €6.49
MyoWare Shield - Mini protoboard for MyoWare sensor Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid. Code SP070 Last items in stock Price €3.29
MyoWare Muscle Sensor Development Kit - OBSOLETE This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together. Code SP074
MyoWare Power Shield MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V. Code SP071 Backorder Price €6.49
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Available Price €8.99
SparkFun RedBot Sensor - Accelerometer The accelerometer sensor is an add-on for your RedBot that provides shock and motion detection. The sensor works by measuring acceleration forces on the x, y and z axes. By measuring the amount of acceleration (or lack thereof), your robot can better understand its movements. Code SP078 Available Price €8.99
Hook-up Wire SparkFun breadboard patch cable - White (22 AWG) 25ft (7.62m) reel of white patch cable for electronics prototyping and breadboarding. 22AWG (approx. 0.34mm2) cross section. Code SP080 Available Regular price €4.29 -7% Price €3.99
Hook-up Wire SparkFun breadboard patch cable - White (22 AWG) 25ft (7.62m) reel of red patch cable for electronics prototyping and breadboarding. 22AWG (approx. 0.34mm2) cross section. Code SP079 Available Regular price €4.29 -7% Price €3.99
Hook-up Stranded Wire SparkFun - Red (22 AWG) 25ft (7.62m) reel of red Flexible Jumper Wire for electronics prototyping, soldering wire or any project where you need flexible wire. 22AWG (approx. 0.34mm2) cross-section. Code SP076 Last items in stock Price €4.59
Hook-up Stranded Wire SparkFun - Black (22 AWG) 25ft (7.62m) reel of black Flexible Jumper Wire for electronics prototyping, soldering wire or any project where you need flexible wire. 22AWG (approx. 0.34mm2) cross-section. Code SP077 Backorder Price €4.59
Hook-Up Wire SparkFun - Assortment (Stranded, 22 AWG) 25ft (7.62m) reels of 6-colour Strandedjumper wire for electronics prototyping and breadboarding. 22AWG cross section (approx. 0.34mm2) Code SP082 Last items in stock Price €31.99
MyoWare 2.0 Cable Shield This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person. Code SP045 Available Price €7.49
Load Cell Weight Sensor 50kg Pressure sensor sometimes called strain gauge. Load cell for measuring weights up to 50kg. The transducer measures the strain of the metal structure and converts it into a few mV. Code Sp096 Available Regular price €7.69 -€0.99 Price €6.70