Nano plate V3.0 CH340 + Arduino compatible pins It has an ATMega328P chip running at 16Mhz with a factory loaded bootloader Characteristic: - Microcontroller: ATmega328 - Operating Voltage (logic level): 5V - Input Voltage (recommended): 7-12V - Digital I / O Pins: 14 (6 PWM outputs) - Analog Inputs: 8 (A0-A7) - DC Current per Pin I / O 40 mA - Flash Memory: 32 KB (2 KB used by the bootloader) - SRAM: 2 KB - EEPROM: 1 KB - Clock Frequency: 16 MHz - USB Communication - CH340 - Dimensions: 18 mm x 44 mm Code B0026 Available Price €8.26
UNO Board CH340 clone - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields Characteristic: - ATmega328P 16MHz chip with external quartz crystal- Microprocessor: ATMega328P- Operating voltage: 5V- Input voltage (recommended): 7-12V- Input voltage (limits): 6-20V- Clock speed: 16 MHz- Digital I / O pins: 14 (6 with PWM)- Analog input pins: 6- DC current for Pin I / O: 20 mA- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P- SRAM 2 KB - AtMega328P- EEPROM 1 KB - AtMega328P- Communication: USB female Type B Code B0011 Available Regular price €6.19 -15% Price €5.26
UNO WIFI Board CH340 compatible Arduino, NodeMCU, WeMos ESP8266 - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields Characteristic: - ATmega328P 16MHz chip with external quartz crystal- Microprocessor: ATMega328P- Operating voltage: 5V- Input voltage (recommended): 7-12V- Input voltage (limits): 6-20V- Clock speed: 16 MHz- Digital I / O pins: 14 (6 with PWM)- Analog input pins: 6- DC current for Pin I / O: 20 mA- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P- SRAM 2 KB - AtMega328P- EEPROM 1 KB - AtMega328P- Communication: micro USB female Code B0070 Available Price €9.91
L298N Motor Drive Controller Board Module Dual H Bridge DC It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. L298N Motor Drive Controller Board Module Dual H Bridge DC features: - Minimum operating voltage: 5 V- Maximum operating voltage: 35 V- Maximum current: ± 2 A- Logic voltage: 5V- PWM signal inputs for speed control- Outputs: for 2 DC motors or for a bipolar stepper motor- Measures: 43x43x24 mm Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles Code M0100 Available Price €2.31
A4988 + Stepstick Radiator Stepper Motor Reprap Stepstick A4988 controller Driver for stepper motors Used with Ramps 1.4 - RepRapArduino Mega Pololu Shield A4988 + Stepstick Radiator Stepper Motor Reprap features: - Minimum operating voltage: 8 V - Operating voltage maximum: 35 V - Maximum current: ± 2 A (adequately ventilated or refrigerated) - Logic voltage: 3 V / 5.5V - Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16 - Factory soldered temples - Use potentiometer to adjust current - Measurements: 20x16x12 mm Code I0014 Available Price €1.57
Power Supply DC 5V 6A 30W Power Supply DC 5V 6A 30W features: - Supply voltage: 110 / 230V AC - Output voltage: 5V DC - Output amperage: 6A - Power at 5V: 30W - Dimensions: 110mm x 78mm x 36mm Code A0085 ✗ Out-of-Stock Regular price €10.66 -€2.00 Price €8.66
Circular force sensing resistor The resistance of the sensor has a force measurement range of 0-10 kgIts resistance varies depending on how much pressure is applied to the detection area, the greater the force, the lower the resistance.Peel and stick the rubber backing on the other side of the detection area to mount.It can detect the applied force in the detection area in the range of 0g-10kg. Circular force sensing resistor features: - Detection area: 1.27cm / 0.5 inches- Output signal: passive variable resistance- Force detection range: 0 g ~ 10 kg- Length: 6 cm / 2.36 inches- Width: 1.9cm / 0.75 inches Code S0135 Available Price €7.02
USB Cable for Arduino Type A-B USB Cable for Arduino Type A-B features: - Length: 50cm- Color: Blue Code K0158 Available Price €1.23
MyoWare Cable Shield This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person. Code SP072 Backorder Price €5.36
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Last items in stock Price €7.43
EMG Muscle Signal Sensor Signal Electromyography EMG Muscle Signal Sensor Signal Electromyography features: EMG Muscle signal sensor module kit with 6 disposable electrodes The EMG sensor serves as a bridge to detect small electrical pulses product of muscle activity and transform them into a signal recognizable by Arduino. NOTE: DO NOT USE THIS SENSOR FOR MEDICAL PURPOSES. Code Examples: https: //github.com/AdvancerTechnologies/MuscleSensorV3 Code M0116 ✗ Out-of-Stock Price €30.50
SparkFun Biomedical sensor pad set 10pcs This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel. This is not a medical device and is to be used for strictly educational purposes. Code SP029 Available Price €10.70
Heart Rate Oximetry Sensor Module for Arduino MAX30100 This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics. Code S0148 Available Regular price €5.74 -€1.00 Price €4.74
MyoWare Power Shield MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V. Code SP071 Backorder Price €5.36
Advancer Technologies MyoWare Muscle Sensor This sensor from Advancer Technologies is an improved version of the bestseller from this producer. It got several upgrades including single supply voltage of 3.1V up to 5V, polarity protection in the power pins output and RAW EMG. Code SP026 Backorder Price €62.39
Smart bathroom scale with Tuya App (Android, iOS): Stylish smart scale with tempered glass platform with heart rate measurement and 12 body analysis functions. Compatible with the Tuya Smart App (iOS 8.0 or higher, Android 6.0 or higher). Easy-to-read LED display. Code VE017 Out-of-Stock Price €33.05
mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module - human presence, FMCW, Configurable Underlying Parameter, Arduino support, Home Assistant, ESPHome Code SS050 Last items in stock Price €9.91
mmWave Radar - Human Presence Detection Sensor (9 Meters) Microwave radar presence and motion sensor using FMCW technology, compatible with Arduino and Raspberry Pi. Code DF029 Available Price €29.74
MyoWare LED Shield This LED shield goes in set with the MyoWare Muscle Sensor. It is a 10-segment bar graph showing the reads from the sensor. Put the two together and you get a great system that allows you to measure and show your muscle activity. Pretty cool, huh? The shield comes equipped with a LiPo power source making it full autonomous. Code SP025 Last items in stock Price €37.18
MyoWare Cable Shield This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person. Code SP072 Backorder Price €5.36
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Last items in stock Price €7.43
EMG Muscle Signal Sensor Signal Electromyography EMG Muscle Signal Sensor Signal Electromyography features: EMG Muscle signal sensor module kit with 6 disposable electrodes The EMG sensor serves as a bridge to detect small electrical pulses product of muscle activity and transform them into a signal recognizable by Arduino. NOTE: DO NOT USE THIS SENSOR FOR MEDICAL PURPOSES. Code Examples: https: //github.com/AdvancerTechnologies/MuscleSensorV3 Code M0116 ✗ Out-of-Stock Price €30.50
SparkFun Biomedical sensor pad set 10pcs This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel. This is not a medical device and is to be used for strictly educational purposes. Code SP029 Available Price €10.70
Heart Rate Oximetry Sensor Module for Arduino MAX30100 This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics. Code S0148 Available Regular price €5.74 -€1.00 Price €4.74
MyoWare Power Shield MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V. Code SP071 Backorder Price €5.36
Advancer Technologies MyoWare Muscle Sensor This sensor from Advancer Technologies is an improved version of the bestseller from this producer. It got several upgrades including single supply voltage of 3.1V up to 5V, polarity protection in the power pins output and RAW EMG. Code SP026 Backorder Price €62.39
Smart bathroom scale with Tuya App (Android, iOS): Stylish smart scale with tempered glass platform with heart rate measurement and 12 body analysis functions. Compatible with the Tuya Smart App (iOS 8.0 or higher, Android 6.0 or higher). Easy-to-read LED display. Code VE017 Out-of-Stock Price €33.05
mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module - human presence, FMCW, Configurable Underlying Parameter, Arduino support, Home Assistant, ESPHome Code SS050 Last items in stock Price €9.91
mmWave Radar - Human Presence Detection Sensor (9 Meters) Microwave radar presence and motion sensor using FMCW technology, compatible with Arduino and Raspberry Pi. Code DF029 Available Price €29.74