Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €6.85
Raspberry Pi Pico The first Raspberry microcontroller with the proprietary RP2040 chip and a dual-core Arm Cortex-M0+, the Foundation's cost-effective yet highly flexible solution. Designed for high performance and with a high degree of digital interfaces. Programming in C/ C++ and MicroPython. Code RA124 Available Price €4.99
Raspberry Pi Pico (With Soldered Header) The first Raspberry microcontroller with the proprietary RP2040 chip and a dual-core Arm Cortex-M0+, the Foundation's cost-effective yet highly flexible solution. Designed for high performance and with a high degree of digital interfaces. Programming in C/ C++ and MicroPython. Code RA131 ✗ Out-of-Stock Price €7.99
T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin features: - Shield expansion module for Raspberry Pi 2 and Pi 3, B and B + - Dimension: 6 x 7.3x 1.9mm Code RA004 Available Price €2.99
T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features: - Shield to connect with breadboard - Dimension: 6 x 7.3x 1.9mm - Flat cable female / female 40 pins - Total length: 25cm - Quantity: 1x shield 1x flat cable Code RA010 Available Price €5.94
Raspberry Pi Pico W with WIFI Following the hugely popular Raspberry Pi Pico, the new Raspberry Pi Pico W is a wireless version of the board based on the RP2040, which adds 2.4 GHz 802.11n WiFi connectivity. The chip has 26 GPIO pins that operate at 3.3V, as well as a built-in temperature sensor. The Raspberry Pi Pico is programmed in C/C++ and MicroPython, via a microUSB connector. Code RA151 Available Regular price €9.95 -€0.50 Price €9.45
Raspberry Pi Pico GPIO Expansion Board The Raspberry Pi Pico GPIO Expansion Board is an advanced product with a 3.3V output voltage that allows you to easily work on the GPIO pins of your Pico, via two ways (male and female header). Ideal for using both male and female jumpers/bridge cables. Code RA125 Available Price €8.95
DS3231 Precision RTC Real Time Clock Module AVR ARM DS3231 Precision RTC Real Time Clock Module AVR ARM features: - Can be used in projects of Arduino, Raspberry Pi, PIC, AVR- Function compatible with the DS 3231- Power supply voltage: +2.3 V to +5.5 V- Temperature range: -40 ° C to + 85 ° C- Low energy consumption- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation- Two alarm calendar- Interface: I2C Code RA011 Available Price €2.95
Raspberry Pi Pico Relay Board The Raspberry Pi Pico Relay Board allows you to control up to 4 devices and loads up to 240V AC at 7A, 30V DC at 10A. It provides a way for users to control high voltage/current devices. Code RA126 Available Price €24.95
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €9.95 -€1.30 Price €8.65
Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features: - Interface type: USB - Supports IEEE 802.11e draft 802.11n - Supports USB 2.0, compatible with USB 1.1 and 1.2 - Support systems: - Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux - Operating distance: 91 meters indoors, 275 meters in open space - Transfer rate: 150Mbps (downlink) and 150Mbps (uplink) - Works with old Wireless-G and Wireless-B networks - WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM - Frequency range: 2.4 to 2.4835 GHz - Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment - Transmission mode: DSSS Code RA015 Available Regular price €8.49 -€2.00 Price €6.49
Grove Shield for Raspberry Pi Pico v1.0 Grove Shield for Pi Pico v1.0 is a plug-and-play Shield for Raspberry Pi Pico that integrates with various types of Grove connectors, such as I2C, UART, digital and analog ports. It allows the construction of prototypes and projects in an easy and fast way without soldering or jumper wires, allowing to explore the infinite possibilities of the Pico. Code SS021 Available Price €7.90
Raspberry Pi 2-3 Model B Multifunction Expansion GPIO Module This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included. The module offers a set of mini jumpers to configure the GPIO. Code RA016 Available Price €7.95
Pimoroni Unicorn HAT Pimeroni Unicorn HAT is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. It is featured with a matrix of 64 RGB LEDs powered directly through the Pi board. The applications of the HAT spread from just a simple games in the classroom up to color indications in your robot. All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI0001 Last items in stock Price €35.99
Pimoroni Display-O-Tron HAT for Raspberry Pi Pimeroni Display-O-Tron is one of the most popular and at the same time easiest to use HATs in Pimoroni offering. It is featured with 16x3 character LCD supporting a complete ASCII character set. The shield is powered directly through the Pi board. The board comes with multiple capactive touch pads on top of that. All functions of the shield are accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimoroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI004 Last items in stock Price €36.99
Pimoroni Unicorn HAT HD Pimeroni Unicorn HAT HD is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. Compared to the Unicorn HAT it is equiped with twice as many LEDs in a row and a column giving a matrix of 256 LEDS! All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI005 Last items in stock Price €49.99
Pimoroni Automation HAT The Pimeroni Automation HAT (PIM213) is a great solution for home automation. The controller board includes relays, powered outputs and buffered inputs up to 24V as well as analog channels. Set of LEDs showing the current state of each of the channels. So if you need to get a light automation or garden sprinkling phasing set in place, this is the board just for you Code PI099 Last items in stock Price €39.99
Pimoroni pHAT Stack - Fully Assembled Kit Can't stand to run out of pins in your Raspberry Pi? You have a cool new accessory but there's no way to plug it in? If you answered yes to any of the above, then this pHAT could be just for you. This piece has 6 sets of 40 GPIOS - one for your Pi and the rest (5) for your collection of HATs that you might want to plug in at the same time. Use it for a specific project or just to play with several HATs at once. Code PI040 Last items in stock Price €24.99
SparkFun Pi Servo HAT - Obsolete 16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal. You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper. Code SP0016 ✗ Out-of-Stock Price €16.99
SparkFun Pi AVR Programmer HAT - OBSOLETE You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following. The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects. Code SP0017
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
Pimoroni Pico Scroll Pack - White The 17 x 7 rectangular matrix has a total of 119 white LEDs that can be controlled individually. A dedicated extension to the Raspberry Pi Pico. The device uses the 12C bus for communication and can be safely powered via the USB port. Code PI044 Last items in stock Price €21.49
Pimoroni Fan SHIM Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish Code PI009 Available Price €15.99
Pimoroni Pico Explorer Base The Pico Explorer Base is an expansion board for the Raspberry Pi Pico, designed to teach circuit properties and allow you to perform science experiments, build small robots and inventions. The board includes functional components such as a mini prototyping board, motor drivers, ADC and GPIO cables, a speaker, a display with four usable buttons, switches and Breakout Garden rails for the expansion module. Code PI046 Last items in stock Price €32.49
Raspberry Pi Sense HAT Sense HAT is your absolute classic used for a well-known and popular Astro Pi projects. It features set of sensors (Pressure, humidity, IMU and temperature) and a great 8x8 LED screen. It is a full set for your Raspberry - you can both measure your projects environment, display it on the screen as well as manouver and input data with joystick and buttons included on the HAT. Code RA999 Available Price €46.99
SparkFun Altavoz Hamburger SparkFun Hamburger speaker is a high quality speaker in a small form and with even smaller price. You wouldn't believe you can get a quality product for less than 7€, right? Well, we couldn't believe that as well, but SparkFun makes that possible. Code SP022 ✗ Out-of-Stock Price €7.99
SparkFun Qwiic HAT for Raspberry Pi The Qwiic HAT is an absolute basic of Qwiic system for Raspberry. It enables a quick and efficient connection of an sensor to your Raspberry over I2C bus (GND, 3.3 V, SDA and SCL). As Qwiic enables daisy chaining of components, you can pretty much install as many sensors on the Qwiic HAT as you want. On top of that it fits perfectly Pi Tin enclosure from SparkFun enabling connection while in case. Code SP031 Available Price €7.99
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89
Serial Enabled 16x2 LCD - White on Black 5V It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328. Code SP035 Last items in stock Regular price €36.99 -€10.00 Price €26.99
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP038 Last items in stock Price €34.99
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
Kit Seeed Grove 20 sensors for Arduino The kit includes 20 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS001 Last items in stock Price €67.95
Kit Seeed Grove 30 sensors for Arduino The kit includes 30 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS002 Last items in stock Price €95.59
Kit Seeed Grove 40 sensors for Arduino The kit includes 40 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS003 Last items in stock Price €109.90
Kit Seeed Grove Arduino Starter Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR! Code SS004 Available Price €35.90
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
Seeed Grove Base kit for Raspberry Pi The Grove Base Kit for Raspberry is all you need to start playing and making with your Raspberry Pi board. It is compatible with boards Pi 3 and Pi 4 and includes 8 basic sensors, a display and a motor. All of that on the grove connectors making it a seamless experience. Code SS006 Last items in stock Regular price €65.99 -€6.00 Price €59.99
Seeed Respeaker 6/Mic Circular Array Kit for Raspberry Pi With this small module, you can integrate your Raspberry with Amazon Alexa voice module or Google Assistant. It has never before been so easy. Get a chance to experience challenges of the newest technological developments in AI and smart home technologies. Code SS007 Backorder Price €59.99
Kit of 28 Sensors with shield for BBC micro: bit The 28 sensor kit is a great extension kit for your micro: bit. Using Sensor shield for micro: bit you can connect all the modules included in the pack only by the connectors without the need to solder or wire any part. Now you can just concentrate on programming with your big mirco: bit. Code B0076 ✗ Out-of-Stock Price €55.49
ReSpeaker 2-Mics Pi HAT ReSpeaker 2-Mics Pi HAT is a dual-microphone expansion board for Raspberry Pi designed for AI and voice applications. You can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on. Code SS015 Backorder Price €15.90
Raspberry Pi HQ Official Camera - Sony IMX477 12,3 megapíxeles Impressive, professional, high-definition camera module. Official product of Raspberry Pi. The official Raspberry Pi HQ Camera includes a 1/3" (8.5mm) Sony IMX477 sensor with 12.3MPx resolution and up to 50% increased sensitivity of pixels per area, offering greater sensitivity to light. It is specially designed to work with CS or C-mount interchangeable lenses (CS-C adapter included). It allows you to use both fixed and varifocal lenses, and you can also use other lenses such as M12 lenses by using an M12 to CS mount converter. Code RA094 Available Regular price €61.40 -€6.41 Price €54.99
Raspberry Pi v2 Oficial Camera - Sony IMX219 8 Megapixel Sensor HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity. Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features: High-quality images High data capacity Fixed 8 megapixel focus (includes focus adjustment tool) Compatible with 1080p, 720p60 and VGA90 Sony IMX219PQ CMOS image sensor 15-pin ribbon cable Code RA053 Last items in stock Price €29.89
Raspberry Pi v2 NoIR Oficial Camera - Sony IMX219 8 Megapixel Sensor Raspberry Pi HD Pi NoIR V2 camera board Raspberry Pi HD Pi NoIR camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. The Pi NoIR (without infrared) is the same as the standard camera module but without an infrared filter. Therefore, it is excellent for photography and video in the dark. The module uses Sony's IMX219PQ image sensor that offers high-speed, high-sensitivity video images. The Pi NoIR module offers contamination from Reduced image such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi NoIR Camera Board, Sony IMX219 8 Megapixel Sensor features: and benefits: No infrared filter High quality images Code RA054 Available Regular price €29.89 -€4.90 Price €24.99
Raspberry Pi 5 Megapixel Camera Module The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. Code RA073 Available Price €8.95
2-DOF Pan-Tilt HAT for Raspberry Pi - tilt camera holder HAT kit with 2 DOF turn & tilt stand designed for Raspberry Pi. Includes the integrated PWM chip PCA9685 that allows RPi to control camera movement, and the TSL25911FN ambient light sensor that detects light intensity through the I2C interface. Code RA098 Available Regular price €25.99 -€3.00 Price €22.99
Raspberry Pi4 4GB Basic Kit The Raspberry Pi 4 kit includes everything you need to enter the world of Raspberry Pi- all hardware in one box. plus step-by-step guide. Code RA093 ✗ Out-of-Stock Regular price €88.41 --€67.68 Price €156.09
Raspberry Pi 400, PC embedded in a keyboard - English Raspberry Pi 400 is the ideal tool, both educational, perfect for students of all ages, and for personal use. This RPi based on model 4, offers a low cost and portable solution, being ideal for home study and for teaching computer concepts such as programming, physical computing and networking. The Raspberry Pi 400 has a quad-core ARM Cortex A72 processor with 4GB of RAM, an Ethernet socket, 3 USB ports, two microHDMI ports and a 40-pin GPIO. English version keyboard Code RA113 ✗ Out-of-Stock Price €109.90
Pimoroni Scroll pHAT HD - Red This HAT for Raspberry has a lot of individual LED pixels to use it as a scrollable display. Control the brightness of its 119 pixels (17x7) individually by PWM and create animations or texts. Code PI011 Available Price €21.89
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit This touch HAT for Raspberry Pi will inspire your next interactive project with up to 12 capacitive touch sensors, from fruit keyboards to interactive lighting. Code PI012 Last items in stock Price €22.90
Pibow Coupé 4 - Ninja - Case for Raspberry Pi 4 The Pibow Coupé 4 is the ideal slim, hackable and attractive case for your Raspberry Pi 4. Code PI013 Available Price €9.95
Pibow Coupé 4 - Rainbow - Case for Raspberry Pi 4 The Pibow Coupé 4 is the ideal slim, hackable and attractive case for your Raspberry Pi 4. Code PI014 Available Price €9.95
Air Monitoring HAT for Raspberry Pi This HAT is an open source portable sensor that provides the level of suspended particulate matter quantity with its mass. It has a powerful and high-tech PMSA003 sensor that provides the information of suspended particulate matter (PM1.0, PM2.5, PM10) in the air per unit volume. Code RA127 ✗ Out-of-Stock Price €56.90
Serial Expansion HAT for Raspberry Pi This Serial Expansion HAT provides a 2-channel I2C and UART interface with 8 programmable GPIO Pins where you can connect more accessories and add-ons. Code RA128 Available Price €21.99
PiRelay v2 Relay Shield for Raspberry Pi Controls 4 devices and loads up to 240V AC / 7A, 30V DC / 10A, a way to control high voltage / current devices. Helps the user to improve the intelligence of the devices. It consists of an "Optocoupler". Code RA129 Last items in stock Price €35.99
16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels 16mm fixed lens compatible with Raspberry Pi official HQ Camera (Reference RA094) C-mount, long distance telephoto type (up to 40m) 10 Mpx. Code RA132 Last items in stock Regular price €61.49 -€11.50 Price €49.99
Kit Raspberry Pi 400 Personal all-in-one Computer on keyboard Kit Raspberry Pi 400- PC embedded in a keyboard + accessories is the ideal tool, both educational, perfect for students of all ages, and for personal use. This RPi based on model 4, offers a low cost and portable solution, being ideal for home study and for teaching computer concepts such as programming, physical computing and networking. The Raspberry Pi 400 has a quad-core ARM Cortex A72 processor with 4GB of RAM, an Ethernet socket, 3 USB ports, two microHDMI ports and a 40-pin GPIO. Code RA096 Available Regular price €149.95 -€45.20 Price €104.75
STEAM kit - Keyes Sensor Learning Starter Kit for BBC micro:bit Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit. Code B0128 Available Regular price €75.95 -€6.00 Price €69.95
Pimoroni pHAT Stack - Solder kit Can't stand to run out of pins in your Raspberry Pi? You have a cool new accessory but there's no way to plug it in? If you answered yes to any of the above, then this pHAT could be just for you. This piece has 6 sets of 40 GPIOS - one for your Pi and the rest (5) for your collection of HATs that you might want to plug in at the same time. Use it for a specific project or just to play with several HATs at once. Code PI045 Last items in stock Price €19.99
Grove - Starter Kit for Arduino The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want. Code SS035 Available Regular price €66.95 -€8.00 Price €58.95