Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 ✗ Out-of-Stock Price €3.26
Battery LIPO 2800mAh 3.7V LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features: -Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output. Code PP042 ✗ Out-of-Stock Price €9.58
Gravity: Analogue heart rate monitor sensor (ECG) for Arduino The DFRobot heart rate monitor sensor (SEN0213) is used to measure the electrical activity of the heart. Code DF015 Last items in stock Price €23.93
Raspberry Pi v2 Oficial Camera - Sony IMX219 8 Megapixel Sensor HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity. Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features: High-quality images High data capacity Fixed 8 megapixel focus (includes focus adjustment tool) Compatible with 1080p, 720p60 and VGA90 Sony IMX219PQ CMOS image sensor 15-pin ribbon cable Code RA053 ✗ Out-of-Stock Price €24.70
16GB Class 10 MicroSD memory card with adapter 16GB Class 10 MicroSD memory card with adapter features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0019 Backorder Price €4.09
Development Board Ra-02 LoRa SX1278 Ra-02 Module (433MHz) Long range NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC ESP8266-12E is an improved version of ESP8266-12 It works as a standard WiFi 802.11 b / g / n 2.4 GHz USB Communication - CP2102 Chip Characteristic: ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode Code W0108 ✗ Out-of-Stock Price €7.43
Shield Li-Po Battery for WeMos D1 Mini ESP826 Shield Li-Po Battery for WeMos D1 Mini ESP826 features: Connect the lithium battery to this shield to supply power for the entire D1 mini system. When the battery is depleted, it is not necessary disconnect the battery, just use the usb port to charge directly. - Charging voltage: max: 10V, recommend: 5V - Charging current: max: 1A - Voltage lithium battery: 3.3-4.2V - Boost power supply: 5V (max: 1 A) - LED color: red for charging, green for fully charged - Ports: * Micro USB - Charging port (normal 5V) * Connect to the lithium battery (normal 3.3-4.2V) * J1 - setting the maximum charging current, 0.5 A or 1A Code W0076 Available Regular price €3.93 -€1.00 Price €2.93
Arduino Oplà IoT Kit - Spanish - Official Internet of Things Kit This new official Arduino Stuff online starter kit is the perfect kit to start your adventure with Arduino. It offers everything you need to introduce your home or environment to the world of home automation and Smart Home. This programmable platform consists of various sensors, touch buttons, actuators, and even a screen, all embedded inside a sophisticated spherical housing, allowing you to add smart connectivity to your devices. The 8 projects included in the Oplà IoT Kit allow users to turn everyday devices into intelligent devices, which can be remotely controlled from a mobile phone. Code AKX26 Last items in stock Price €120.58
DS3231 Precision RTC Real Time Clock Module AVR ARM DS3231 Precision RTC Real Time Clock Module AVR ARM features: - Can be used in projects of Arduino, Raspberry Pi, PIC, AVR- Function compatible with the DS 3231- Power supply voltage: +2.3 V to +5.5 V- Temperature range: -40 ° C to + 85 ° C- Low energy consumption- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation- Two alarm calendar- Interface: I2C Code RA011 Available Price €2.44
Raspberry Pi Sense HAT Sense HAT is your absolute classic used for a well-known and popular Astro Pi projects. It features set of sensors (Pressure, humidity, IMU and temperature) and a great 8x8 LED screen. It is a full set for your Raspberry - you can both measure your projects environment, display it on the screen as well as manouver and input data with joystick and buttons included on the HAT. Code RA999 Available Price €38.83
Kit Seeed Grove Arduino Starter Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR! Code SS004 Available Price €29.67
Pimoroni Display-O-Tron HAT for Raspberry Pi Pimeroni Display-O-Tron is one of the most popular and at the same time easiest to use HATs in Pimoroni offering. It is featured with 16x3 character LCD supporting a complete ASCII character set. The shield is powered directly through the Pi board. The board comes with multiple capactive touch pads on top of that. All functions of the shield are accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimoroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI004 Last items in stock Price €30.57
Pimoroni Fan SHIM Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish Code PI009 Available Price €13.21
PiRelay v2 Relay Shield for Raspberry Pi Controls 4 devices and loads up to 240V AC / 7A, 30V DC / 10A, a way to control high voltage / current devices. Helps the user to improve the intelligence of the devices. It consists of an "Optocoupler". Code RA129 Last items in stock Price €29.74
Grove - Starter Kit for Arduino The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want. Code SS035 Available Regular price €55.33 -€8.00 Price €47.33
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €8.22 -€1.30 Price €6.92
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €6.60
Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €5.66
DS3231 Precision RTC Real Time Clock Module AVR ARM DS3231 Precision RTC Real Time Clock Module AVR ARM features: - Can be used in projects of Arduino, Raspberry Pi, PIC, AVR- Function compatible with the DS 3231- Power supply voltage: +2.3 V to +5.5 V- Temperature range: -40 ° C to + 85 ° C- Low energy consumption- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation- Two alarm calendar- Interface: I2C Code RA011 Available Price €2.44
Raspberry Pi Sense HAT Sense HAT is your absolute classic used for a well-known and popular Astro Pi projects. It features set of sensors (Pressure, humidity, IMU and temperature) and a great 8x8 LED screen. It is a full set for your Raspberry - you can both measure your projects environment, display it on the screen as well as manouver and input data with joystick and buttons included on the HAT. Code RA999 Available Price €38.83
Kit Seeed Grove Arduino Starter Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR! Code SS004 Available Price €29.67
Pimoroni Display-O-Tron HAT for Raspberry Pi Pimeroni Display-O-Tron is one of the most popular and at the same time easiest to use HATs in Pimoroni offering. It is featured with 16x3 character LCD supporting a complete ASCII character set. The shield is powered directly through the Pi board. The board comes with multiple capactive touch pads on top of that. All functions of the shield are accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimoroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI004 Last items in stock Price €30.57
Pimoroni Fan SHIM Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish Code PI009 Available Price €13.21
PiRelay v2 Relay Shield for Raspberry Pi Controls 4 devices and loads up to 240V AC / 7A, 30V DC / 10A, a way to control high voltage / current devices. Helps the user to improve the intelligence of the devices. It consists of an "Optocoupler". Code RA129 Last items in stock Price €29.74
Grove - Starter Kit for Arduino The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want. Code SS035 Available Regular price €55.33 -€8.00 Price €47.33
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €8.22 -€1.30 Price €6.92
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €6.60
Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €5.66