Pimoroni Fan SHIM
  • Pimoroni Fan SHIM
  • Pimoroni Fan SHIM
  • Pimoroni Fan SHIM

Pimoroni Fan SHIM

PI009

Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish

Pimoroni
606034879409
PIM461
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Description of Pimoroni Fan for Raspberry:

Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish

The Fan gives significantly improved performance fully satisfying increased needs from Raspberry Pi 4. Check out full blog entry on Medium to read more details.

Based on the Python libraries you can set-up the fan to turn on and off based on the temperature of the CPU or to do it manually. And all of that in 10 EUR only!

https://solectroshop.com/img/p/6/3/2/0/6320.jpg

Installation guide 

Features of Pimoroni Fan for Raspberry:

  • Features
  • 30mm 5V DC fan
  • 4,200 RPM
  • 0.05 m3/min air flow
  • 18.6 dB acoustic noise (whisper-quiet)
  • Friction-fit header
  • No soldering required
  • RGB LED (APA102)
  • Tactile switch
  • Basic assembly required
  • Compatible with Raspberry Pi 4 (and 3 B+, 3 A+)
  • Dimensions: 45x39x11mm

Interesting links for Pimoroni Fan for Raspberry Pi:

Note
  • When mounting or detaching the fan, or assembled Fan SHIM, do not push on the fan itself, as it is liable to break.
  • Be careful to mount your Fan SHIM on the correct pins on your Pi, with the Pi shut down and power disconnected. Shifting it left by one pin or down a full row of pins could cause damage to both the Fan SHIM and the Pi. Check out the photos in our tutorial if you're not sure.
  • Not heatsink-compatible!
  • Because Fan SHIM uses pin BCM18 to control the fan, and this pin is also used by I2S audio devices, you won't be able to use I2S DACs like pHAT DAC, pHAT BEAT, and the IQAudio boards at the same time as Fan SHIM

Customers who bought this product also bought

Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF

Can be connected with the ESP8266 module with Ipex
Compatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA male connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1.13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

W0024

Price €1.95

5x Strip 16 Pin Female Short

5x Strip 16 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 5 units of strips of 16 female pins each

K0141

Price €0.26

Gel Battery 12V 7Ah

Gel Battery 12V 7Ah features:

  • Long service life - both in cyclic and buffer operation
  • No delamination effect from the gelled electrolyte
  • It tolerates high operating temperatures well
  • It fully recovers to its original capacity from deep discharge

PP104

Regular price €18.99 -€2.42 Price €16.57

Dupont Connector 2.54mm Female

Dupont Connector 2.54mm Female features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

K0110

Price €2.19
€15.99

13,21 tax excl.

Tax included 1
Last 6 items
Price €15.99

Order until 4pm we will send today
30 days return