Current and Voltage Meter Tester Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets.The voltage and current are shown successively.Current and Voltage Meter Tester features:- Operating range: - Voltage 3 - 7,5V - Current 0 -3A- Resolution: 10mV 1mA- Error: <± 1.5%%- Dimensions: 5.2 x 2 x 1.5 cm Code K0081 Available Price €2.89
Raspberry Pi v2 Oficial Camera - Sony IMX219 8 Megapixel Sensor HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity. Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features: High-quality images High data capacity Fixed 8 megapixel focus (includes focus adjustment tool) Compatible with 1080p, 720p60 and VGA90 Sony IMX219PQ CMOS image sensor 15-pin ribbon cable Code RA053 Last items in stock Price €29.89
Raspberry Official power supply for Raspberry Pi 4, USB-C 5V 3A The official Raspberry 4 power supply with USB-C connector up to 3.1 A in white. Code RA067 Available Price €8.85
Raspberry Pi Shield MPI35 3.5 inch TFT LCD screen 240x320 The screen is intended for use with a 3.5-inch acrylic case, reference in our store: RA018 Raspberry Pi Shield MPI35 3.5 inch TFT LCD screen 240x320 features: - XT2046 touch controller - Resistive touch screen - Current consumption: 250mA (unconfirmed) - Screen type: TFT LCD screen - Color: 16 bits - Display backlight: White LED - Characters x Lines: 480x320 - Communication format: Parallel - Form factor: 3.5 "Screen size - Pinhole: 2.54 mm Code RA055 Available Price €19.99
Wio Terminal - ATSAMD51 - RTL8720DN WiFi Bluetooth - Seeedstudio Wio Terminal: ATSAMD51 Core development board with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G / 5G. Arduino and MicroPython compatible, Wio Terminal is an ATSAMD51-based microcontroller with wireless connectivity compatible with Realtek RTL8720DN. Its CPU speed runs at 120MHz (Boost up to 200MHz). The Realtek RTL8720DN chip supports Bluetooth and Wi-Fi, providing the backbone for IoT projects. The Wio terminal itself is equipped with a 2.4 ”LCD screen, integrated IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared emitter (IR 940 nm). Code SS010 Last items in stock Price €55.49
Micro:bit BBC v2 - WiFi Single Board Micro-Computer, BLE 5.0, OBSOLETE This version has been withdrawn from sale. Select model BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer (solectroshop.com) The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. Code B0111
Battery charger BMS 3,7-96V 10A - Automatic charge controller module This 3.7-96V 10A battery charger is an automatic charge controller module that prevents the battery from dropping below a voltage level, the value of which is adjustable. It is suitable for 1.5 to 120V batteries, as using it will save time and energy. Code A0130 Available Price €10.90
Micro HDMI - HDMI cable 1.5m HDMI - Micro HDMI cable can be used to connect HDTVs to tablets, smartphones or any device equipped with a Micro HDMI socket to experience audio and video quality (up to 1080p) from home. Thanks to the built-in Ethernet network, this cable allows you to share the Internet connection between several devices without having to use a separate Ethernet cable for each of them. Check your device's user manual to make sure you have the right connectors. This cable, made of good materials for HDMI, guarantees clean transmission between HDMI devices. No interference or data loss in digital transmission. Compatible with all HD formats available on the market and suitable for 480p/480i/720p/1080i and 1080p resolutions. Also compatible with HDMI 1.3b. Code K0305 Available Price €5.49
Pimoroni Display-O-Tron HAT for Raspberry Pi Pimeroni Display-O-Tron is one of the most popular and at the same time easiest to use HATs in Pimoroni offering. It is featured with 16x3 character LCD supporting a complete ASCII character set. The shield is powered directly through the Pi board. The board comes with multiple capactive touch pads on top of that. All functions of the shield are accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimoroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI004 Last items in stock Price €36.99
Kit Raspberry Pi 400 Personal all-in-one Computer on keyboard Kit Raspberry Pi 400- PC embedded in a keyboard + accessories is the ideal tool, both educational, perfect for students of all ages, and for personal use. This RPi based on model 4, offers a low cost and portable solution, being ideal for home study and for teaching computer concepts such as programming, physical computing and networking. The Raspberry Pi 400 has a quad-core ARM Cortex A72 processor with 4GB of RAM, an Ethernet socket, 3 USB ports, two microHDMI ports and a 40-pin GPIO. Code RA096 Available Regular price €149.95 -€45.20 Price €104.75
M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12 M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. Long Focal Length. Code WV013 Available Price €35.95
Grove - Starter Kit for Arduino The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want. Code SS035 Available Regular price €66.95 -€8.00 Price €58.95
Pimoroni Unicorn HAT HD Pimeroni Unicorn HAT HD is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. Compared to the Unicorn HAT it is equiped with twice as many LEDs in a row and a column giving a matrix of 256 LEDS! All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI005 Last items in stock Price €49.99
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
Gravity: IO Expansion Shield for Arduino V7.1 Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins. Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules. Code DF027 Available Price €14.95
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
SparkFun Pi AVR Programmer HAT - OBSOLETE You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following. The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects. Code SP0017
Raspberry Pi4 4GB Basic Kit The Raspberry Pi 4 kit includes everything you need to enter the world of Raspberry Pi- all hardware in one box. plus step-by-step guide. Code RA093 ✗ Out-of-Stock Regular price €88.41 --€67.68 Price €156.09
Power Adapter 220VAC DC 5.1V, 3A USB-C Power Adapter 220VAC DC 5.1V, 3A USB-C features: - Input voltage: 100 ~ 240V AC 50Hz- Output voltage: 5.1V DC- Output current: 3A- DC connector: USB-C- Cable length 80cm Code RA063 Available Price €8.85
Official Raspberry Pi Mouse, Red/White, Wired Official Raspberry Pi Mouse with wheel. - compatible with all Raspberry Pi products - with its comfortable ergonomic design and its colorful display, it is designed to complement official products existing. Official Raspberry Pi Mouse, Red/White, Wired features: - High quality 3 button optical mouse with scroll wheel - Ergonomic design for convenience of use - Compatible with all Raspberry Pi products - USB-A Plug and Play connector Code RA064 Last items in stock Price €9.99
Raspberry Official power supply for Raspberry Pi 4, USB-C 5V 3A The official Raspberry 4 power supply with USB-C connector up to 3.1 A in white. Code RA067 Available Price €8.85
Kit Raspberry Pi 400 Personal all-in-one Computer on keyboard Kit Raspberry Pi 400- PC embedded in a keyboard + accessories is the ideal tool, both educational, perfect for students of all ages, and for personal use. This RPi based on model 4, offers a low cost and portable solution, being ideal for home study and for teaching computer concepts such as programming, physical computing and networking. The Raspberry Pi 400 has a quad-core ARM Cortex A72 processor with 4GB of RAM, an Ethernet socket, 3 USB ports, two microHDMI ports and a 40-pin GPIO. Code RA096 Available Regular price €149.95 -€45.20 Price €104.75
Micro HDMI - HDMI cable 1.5m HDMI - Micro HDMI cable can be used to connect HDTVs to tablets, smartphones or any device equipped with a Micro HDMI socket to experience audio and video quality (up to 1080p) from home. Thanks to the built-in Ethernet network, this cable allows you to share the Internet connection between several devices without having to use a separate Ethernet cable for each of them. Check your device's user manual to make sure you have the right connectors. This cable, made of good materials for HDMI, guarantees clean transmission between HDMI devices. No interference or data loss in digital transmission. Compatible with all HD formats available on the market and suitable for 480p/480i/720p/1080i and 1080p resolutions. Also compatible with HDMI 1.3b. Code K0305 Available Price €5.49
Serial Expansion HAT for Raspberry Pi This Serial Expansion HAT provides a 2-channel I2C and UART interface with 8 programmable GPIO Pins where you can connect more accessories and add-ons. Code RA128 Available Price €21.99
M12 High Resolution Lens, 5MP, 20.2° FOV, 25mm Focal length, Compatible with Raspberry Pi High Quality Camera M12 M12 Long Focal Length Lens, 5MP, Long Focal Length 25mm, F1.7 Large Aperture, Compatible with Raspberry Pi High Quality Camera M12 Code WV014 Available Price €22.95
Raspberry Pi4 4GB Basic Kit The Raspberry Pi 4 kit includes everything you need to enter the world of Raspberry Pi- all hardware in one box. plus step-by-step guide. Code RA093 ✗ Out-of-Stock Regular price €88.41 --€67.68 Price €156.09
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
Grove Starter Kit for Seeed Studio BeagleBone® Green This starter kit aims to quickly get you connected to Seeed Studio BeagleBone® Green. It contains 10 Grove modules and we provide you with 3 step-by-step projects to get you started quickly with all modules. The set comes in a handy box and is attractively priced! Code SS040 Available Regular price €59.95 -€19.96 Price €39.99
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
Pimoroni Automation HAT The Pimeroni Automation HAT (PIM213) is a great solution for home automation. The controller board includes relays, powered outputs and buffered inputs up to 24V as well as analog channels. Set of LEDs showing the current state of each of the channels. So if you need to get a light automation or garden sprinkling phasing set in place, this is the board just for you Code PI099 Last items in stock Price €39.99
Seeed Grove Base kit for Raspberry Pi The Grove Base Kit for Raspberry is all you need to start playing and making with your Raspberry Pi board. It is compatible with boards Pi 3 and Pi 4 and includes 8 basic sensors, a display and a motor. All of that on the grove connectors making it a seamless experience. Code SS006 Last items in stock Regular price €65.99 -€6.00 Price €59.99
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
M12 High Resolution Lens, 12MP, 160° FOV, 3.2mm Focal length, Compatible with Raspberry Pi High Quality Camera M12 M12 High Resolution Lens, 12MP, 160° FOV, 3.2mm Focal length, Compatible with Raspberry Pi High Quality Camera M12 Code WV011 Available Price €29.95