Capsule Electret Condenser Microphones 9.5mm MIC Capsule Electret Condenser Microphones 9.5 MIC features: - Measures: 9.7 x 6.7mm- Impedance: 1.5kΩ- Working current: 0.5mA- Working voltage: 4.5V (1.5-10V)- Bandwidth: 50 ... 16000Hz- Signal to noise ratio: ‰¥58dB- Sensitivity: -42 ± 3dB- Sensitivity tolerance: ± 3dB- Distance between terminals: 2.54mm Code M0020 Available Price €0.79
Analogical Acoustic Sensor 4-Pin Microphone Sound Detector Module Sound detection module for Arduino projects, smart cars. Analogical Acoustic Sensor 4-Pin Microphone Sound Detector Module features: - Adjustable High Sensitivity Acoustic Sensor - LM393 comparator chip - Integrated indicator LED - AO analog output, output voltage signal in time real microphone - DO digital output, sensitivity adjustable through potentiometer - Frequency Range between 30 and 15000 Hz - Power 4 ~ 6V - Measurements 36x16x15mm Code S0017 Available Price €1.79
Battery holder 2x 18650 3,7V Parallel Lithium Battery Instruction: - The drawing of the polarities is not correct, it is wrong - Put the batteries in parallel Characteristic: - Cable 15cm long - Measures 74x42x 20mm - Weight: 10 gr. (Approx.) - Stack length max 67mm Code PP016 Available Price €1.85
Micro SD Card Reader/Recorder The micro SD card reader module is a simple solution for transferring data to and from a standard micro SD card.The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.Ideal for projects with ARDUINO, PIC, AVR, STM32.Micro SD Card Reader/Recorder features:- Supply voltage: 4.5V- 5.5V- Adjustable 3.3V built-in regulator for SPI pins- Consumption <200mA- Interface: SPI- Dimensions: 24mmx 42mm x 12mmSupports microSD cards (up to 2G) and micro SDHC (up to 32G) Code M0006 Available Price €2.49
Kapton type 10mm thermal tape Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acid and alkaline products - Resistant to solvent - Adhesive - Length Approx: 33m - Polyamide adhesive tape 10mm - Known as Kapton polyamide tape - Product for welding works on those that need to protect some component from the heat Code I0061 Available Price €2.15
10x Multicolor LED 5mm 7 colors fast blink 5mm multicolor LED with automatic color change. 7 different colors are emitted and the blinking is fast. Code P0136 Available Price €0.15
Rechargeable Battery XTAR 18650 2600mAh Li-ion Rechargeable Battery XTAR 18650 2600mAh Li-ion features: - With PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life - Quantity: 1 unit Code PP028 ✗ Out-of-Stock Price €9.99
DSC321 AT24C32 with Real Time Clock RTC Battery RTC DS3231 clock module with EEPROM 32k.High precision RTC module.Can be used in projects of Arduino, PIC, AVR, STM32 and other.DSC321 AT24C32 with Real Time Clock RTC Battery features:- Based on DS3231- EEPROM AT24C32 (32K)- I2C interface- LED work indicator- Includes CR2032 3V battery Code M0004 Available Price €4.49
Air Monitoring HAT for Raspberry Pi This HAT is an open source portable sensor that provides the level of suspended particulate matter quantity with its mass. It has a powerful and high-tech PMSA003 sensor that provides the information of suspended particulate matter (PM1.0, PM2.5, PM10) in the air per unit volume. Code RA127 ✗ Out-of-Stock Price €56.90
Kit Seeed Grove 30 sensors for Arduino The kit includes 30 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS002 Last items in stock Price €95.59
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
Kit Seeed Grove 20 sensors for Arduino The kit includes 20 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS001 Last items in stock Price €67.95
Gravity: IO Expansion Shield for Arduino V7.1 Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins. Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules. Code DF027 Available Price €14.95
T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features: - Shield to connect with breadboard - Dimension: 6 x 7.3x 1.9mm - Flat cable female / female 40 pins - Total length: 25cm - Quantity: 1x shield 1x flat cable Code RA010 Available Price €5.94
STEAM kit - Keyes Sensor Learning Starter Kit for BBC micro:bit Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit. Code B0128 Available Regular price €75.95 -€6.00 Price €69.95
Gravity: Starter Kit for Arduino Gravity: Starter Kit for Arduino is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. The Gravity Kit presented here is equipped with numerous electronic components, such as a motherboard that works with the Arduino Uno - DFRduino Uno v3. DFRobot Gravity IO Expansion shield for Arduino is enclosed as well. Code DF030 Last items in stock Price €95.95
Kit of 28 Sensors with shield for BBC micro: bit The 28 sensor kit is a great extension kit for your micro: bit. Using Sensor shield for micro: bit you can connect all the modules included in the pack only by the connectors without the need to solder or wire any part. Now you can just concentrate on programming with your big mirco: bit. Code B0076 ✗ Out-of-Stock Price €55.49
Serial Expansion HAT for Raspberry Pi This Serial Expansion HAT provides a 2-channel I2C and UART interface with 8 programmable GPIO Pins where you can connect more accessories and add-ons. Code RA128 Available Price €21.99
Air Monitoring HAT for Raspberry Pi This HAT is an open source portable sensor that provides the level of suspended particulate matter quantity with its mass. It has a powerful and high-tech PMSA003 sensor that provides the information of suspended particulate matter (PM1.0, PM2.5, PM10) in the air per unit volume. Code RA127 ✗ Out-of-Stock Price €56.90
Kit Seeed Grove 30 sensors for Arduino The kit includes 30 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS002 Last items in stock Price €95.59
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
Kit Seeed Grove 20 sensors for Arduino The kit includes 20 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS001 Last items in stock Price €67.95
Gravity: IO Expansion Shield for Arduino V7.1 Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins. Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules. Code DF027 Available Price €14.95
T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features: - Shield to connect with breadboard - Dimension: 6 x 7.3x 1.9mm - Flat cable female / female 40 pins - Total length: 25cm - Quantity: 1x shield 1x flat cable Code RA010 Available Price €5.94
STEAM kit - Keyes Sensor Learning Starter Kit for BBC micro:bit Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit. Code B0128 Available Regular price €75.95 -€6.00 Price €69.95
Gravity: Starter Kit for Arduino Gravity: Starter Kit for Arduino is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. The Gravity Kit presented here is equipped with numerous electronic components, such as a motherboard that works with the Arduino Uno - DFRduino Uno v3. DFRobot Gravity IO Expansion shield for Arduino is enclosed as well. Code DF030 Last items in stock Price €95.95
Kit of 28 Sensors with shield for BBC micro: bit The 28 sensor kit is a great extension kit for your micro: bit. Using Sensor shield for micro: bit you can connect all the modules included in the pack only by the connectors without the need to solder or wire any part. Now you can just concentrate on programming with your big mirco: bit. Code B0076 ✗ Out-of-Stock Price €55.49
Serial Expansion HAT for Raspberry Pi This Serial Expansion HAT provides a 2-channel I2C and UART interface with 8 programmable GPIO Pins where you can connect more accessories and add-ons. Code RA128 Available Price €21.99