PiRelay v2 Relay Shield for Raspberry Pi Controls 4 devices and loads up to 240V AC / 7A, 30V DC / 10A, a way to control high voltage / current devices. Helps the user to improve the intelligence of the devices. It consists of an "Optocoupler". Code RA129 Last items in stock Price €35.99
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
Pimoroni Pico Explorer Base The Pico Explorer Base is an expansion board for the Raspberry Pi Pico, designed to teach circuit properties and allow you to perform science experiments, build small robots and inventions. The board includes functional components such as a mini prototyping board, motor drivers, ADC and GPIO cables, a speaker, a display with four usable buttons, switches and Breakout Garden rails for the expansion module. Code PI046 Last items in stock Price €32.49
Serial Expansion HAT for Raspberry Pi This Serial Expansion HAT provides a 2-channel I2C and UART interface with 8 programmable GPIO Pins where you can connect more accessories and add-ons. Code RA128 Available Price €21.99
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €9.95 -€1.30 Price €8.65
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin features: - Shield expansion module for Raspberry Pi 2 and Pi 3, B and B + - Dimension: 6 x 7.3x 1.9mm Code RA004 Available Price €2.99
Kit Seeed Grove Arduino Starter Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR! Code SS004 Available Price €35.90
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies. Code SP021
PiRelay v2 Relay Shield for Raspberry Pi Controls 4 devices and loads up to 240V AC / 7A, 30V DC / 10A, a way to control high voltage / current devices. Helps the user to improve the intelligence of the devices. It consists of an "Optocoupler". Code RA129 Last items in stock Price €35.99
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
Pimoroni Pico Explorer Base The Pico Explorer Base is an expansion board for the Raspberry Pi Pico, designed to teach circuit properties and allow you to perform science experiments, build small robots and inventions. The board includes functional components such as a mini prototyping board, motor drivers, ADC and GPIO cables, a speaker, a display with four usable buttons, switches and Breakout Garden rails for the expansion module. Code PI046 Last items in stock Price €32.49
Serial Expansion HAT for Raspberry Pi This Serial Expansion HAT provides a 2-channel I2C and UART interface with 8 programmable GPIO Pins where you can connect more accessories and add-ons. Code RA128 Available Price €21.99
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €9.95 -€1.30 Price €8.65
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin features: - Shield expansion module for Raspberry Pi 2 and Pi 3, B and B + - Dimension: 6 x 7.3x 1.9mm Code RA004 Available Price €2.99
Kit Seeed Grove Arduino Starter Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR! Code SS004 Available Price €35.90
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies. Code SP021