Pimoroni Display-O-Tron HAT for Raspberry Pi

This Serial Expansion HAT provides a 2-channel I2C and UART interface with 8 programmable GPIO Pins where you can connect more accessories and add-ons.

16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal.

You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper.

The kit includes 30 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes.

This fingeprint scanner from ADH-Tech combines a highly precise fingerprint sensor module with an onboard MCU and UART interface enabling trivially very connection to any project.

The scanner independently reads and analyses the fingerprint thanks to an MCU algorithm that can send a converted digital signal to a peripheral serial interface for a data read. The onboard MCU algorithm enables operations such as for example a fingerprint enroll.

The Pimeroni Automation HAT (PIM213) is a great solution for home automation. The controller board includes relays, powered outputs and buffered inputs up to 24V as well as analog channels. Set of LEDs showing the current state of each of the channels. So if you need to get a light automation or garden sprinkling phasing set in place, this is the board just for you

Pimeroni Unicorn HAT is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. It is featured with a matrix of 64 RGB LEDs powered directly through the Pi board. The applications of the HAT spread from just a simple games in the classroom up to color indications in your robot. All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout

2 Channel Relay Module 5V 10A for Arduino features:
- 5V relay module with 2 optocoupled channels
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- LED indicator: For each channel
- Dimensions: 40x 50mm

Sense HAT is your absolute classic used for a well-known and popular Astro Pi projects. It features set of sensors (Pressure, humidity, IMU and temperature) and a great 8x8 LED screen. It is a full set for your Raspberry - you can both measure your projects environment, display it on the screen as well as manouver and input data with joystick and buttons included on the HAT.

Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish

This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included.
The module offers a set of mini jumpers to configure the GPIO.