Arduino

Sensor Module FZ0888 IR Infrared Speed Meter features:
- The FZ0888 encoder module is a device that can help you in the creation of your robotics and automation project, Whether you want to know the speed of a motor or its exact position
- The module has a digital output (DO) which can be connected to your preferred microcontroller.
The operating mode:
- When the sensor is blocked, the DO output is high
- The AO signal is not enabled in this module
- Power supply: 3.3-5V
- Power consumption current 20 mA max
- PCB dimensions: 32 x 14 mm

Arduino Starter Kit is a perfect kit to start your adventure with Arduino. It offers a range of original components, which ensure compatibility with all Arduino parts and give you access to full range of official materials. Additionally, you get a 15 projects booklet, which is pretty much all you need to start rolling with your Arduino projects

Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor features:
- Operating range: 0.2mm to 15mm
- Receiver: Phototransistor
- Emitter: Infrared Led
- Wavelength: 950 nm

The ideal package for teachers looking for classroom solutions that introduce programming and electronics through fun and engaging interactive projects.

It is a ready-made package with the curriculum available for ready-made classes - it comes with a booklet of 15 introduction classes written by Arduino team.

The Arduino Starter Kit class package is a solution package, containing six of the popular Arduino Starter Kits. This classroom package is for a classroom of at least twelve students - the recommended ratio is two students per kit - and is intended for use by middle school teachers looking for a comprehensive educational solution based on the Arduino platform.

The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision.
The ideal obstacle detection detector for the installation of smart robots.
TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object.
The working wavelength is 950nm.
The transmitter is infrared LED and the phototransistor receiver.
By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected).
The sensor allows the detection of an object at a distance of up to 12 mm.

The kit includes 20 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes.

Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.
DS18B20 Submersible Probe Sensor Temperature features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Red Vcc
      - Yellow digital output
- Inocidable steel
- Cable length: 1m

The kit includes 30 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes.

The kit includes 40 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes.

The module has two outputs: analog A0 and digital D0
Digital output D0 - signal 0 appears or 1 depending on the threshold setting
The threshold is set with the potentiometer
The sensor can be used for example:
Automatic watering for potted plants
With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants
Characteristic:
Operation: 3.3V -5V
- Sensitivity adjustable by potentiometer
- Dual output mode: analog and digital
- Red LED - power indicator
- Green LED - indicator digital switching output
- PCB measurements: 3 x 1.5 cm
- Probe measurements: 6 x 3 cm

Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR!

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we can measure the pulse width PWM depending on the distance of the obstacle.
Mounting bracket is ideal for installing the sensor on mobile platforms such as robots, vehicles, etc. HC-SR04 + Ultrasonic Sensor Support Arduino features:
- Supply voltage: 5V (4.5V-6V)
- Consumption: typical 30 mA, (35 mA max)
- Interface: VCC, GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED measurement indicator in progress
- Frequency: 40 kHz for 200 μs
- Size: 30 mm x 20 mm Feature of the support: - Material: Acrylic
- Transparent color
- Includes screws

Mini UNO ATMega328 basic kit for Arduino to learn programming.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.

Descripción: Light sensor module to measure light intensity and obtain digital data from it.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
BH1750FVI (Rohm) is used to adjust backlighting of LCD screens and keyboards by manufacturers of mobile phones, digital cameras, navigation and portable gaming devices. Light Sensor Module BH1750 FVI Arduino Raspberry features:
- Chip BH1750FVI
- Supply voltage 3V-5V
- Integrated 16bit AD converter
- Detection range: 0-65535 lx (with an accuracy of 1 lux)
- Interface: II2C
- Low dependence on the light source (eg incandescent lamp, fluorescent lamp, halogen lamp, white LED, sunlight)
- Dimensions 18.4 x 14 mm

Mini UNE ATMega328 basic kit for Arduino to learn programming.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.

Perfect kit to learn programming and electronics in the middle of Arduino. This kit includes a manual in Spanish with 20 basic projects. It allows to build various projects of varying complexity, from the easiest ... to the most complicated. The kit does not include an Arduino board. To put it, you can buy an original Arduino board or a Chinese equivalent separately.

10x Photoresistor 5mm GL5516 LDR 5-10k for Arduino.
Photoresistor is a resistor whose resistance decreases when increasing the intensity of the light that falls on it. 10x Photoresistor GL5516 LDR features:
- Model: GL5516
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 90mW.
- Resistance with light (10lux): 5-10KΩ
- Resistance with darkness (0lux): 0.5MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC

Photoresistance is a resistor whose resistance decreases as the intensity of the light that falls on it increases. 10x Photoresistor GL5539 LDR 50k - 100k features:
- Model: GL5539
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 100mW
- Resistance with light (10lux): 50-100KΩ
- Resistance with darkness (0lux): 5MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC

UNO R3 Basic Kit ATMega328 in a box for Arduino. It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
100% Arduino compatible
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x Protoboard Breadboard 5x7cm
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 3x BC547B Bipolar Transistor NPN 50V 100mA 0.1A TO-92
- 3x BC557B Bipolar Transistor PNP 50V 100mA 0.1A TO-92
- 1x PCF8574P I/>

Starter kit with the UNO R3 module sensors in a box for Arduino.
Compatible with Arduino
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module
- 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x USBASP Programmer Adapter Cable Atmega8 Atmega128 AVR
- 5x Push Switch Button B3F Omron Yellow Key
- 1x Linear 5K Potentiometer OHM kΩ

Barometric Pressure, Temperature and Altitude Sensor BMP180 features:
- Module based on the atmospheric pressure sensor BMP180
- Supply voltage: 1.8 - 3.6 V
- Energy consumption: 0.5uA
- I2C interface
- Measuring range: 300 - 1100hPa
- Dimensions: 10 x 13 mm
- Includes soldering pins

Perfect kit to learn programming in the middle of Arduino the basic of electronics
It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.   Characteristic:   It includes the following module references:   - 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module
- 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor
- 1x Infrared LED Flame Sensor 5mm
- 3x Photoresistor GL5516 LDR

Characteristic: - Supply voltage: 4.5V- 5.5V
- Consumption: 30 mA typical
- Analog output
- Range: 10cm to 80cm
- Dimensions: 29x12mm
- Cable length: 20cm GP2Y0A21YK0F Sharp Analog IR distance sensor 10CM-80CM Arduino

Perfect kit to learn programming in the middle of Arduino the basic of electronics It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.   Characteristic:   It includes the following module references:   - 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x ProtoShield Prototype Expansion Board with Mini Breadboard 170 points for Arduino Proto V5.0
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor

Sensor used to measure the current in the circuit to which it is connected.
It is based on the ACS712 chip, capable of measuring intensity in both DC and AC. Current Sensor ACS712 AC/DC 20A Hall Current Ammeter features:
- Output: Analog
- Power: 5V
- Accuracy: 1.5%
- Measuring capacity: +/- 20A
- Dimensions: 31 x 13 mm

Ideal for projects with ARDUINO, Smart Car
Detects transparent and translucent obstacles
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:
- Current consumption: up to 100 mA
- Supply voltage 5V
- Current consumption <25mA
- Response time of 2 ms
- Measured distance: 3-80cm 15st angle
- Screw to adjust the sensitivity, the back
- Output status led indicator
- Operating temperature: -25°C - + 55°C
- Material: high-strength plastic
- Type of output: normally open, NPN
- Dimensions: 18 mm in diameter, Length 45 mm
- Cable length 55cm
- Departures:
      - Brown: +
      - Blue: -
      - Black: OUT

Perfect "Starter Kit Mega XL" to learn programming with arduino the basis of electronics. It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x R3 REV3 ATmega2560 16U2 Mega2560 + USB 100% Compatible - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor
- 1x fire sensor
- 3x Photoresistor GL5516 LDR
- 4x Push Switch Button B3F Omron Blue Key 12mm

2x CNY70 Reflective Optical Sensor with Transistor Output features:
- Reflective optical sensor with transistor output
- Reflective optical coupler used to distinguish edge or line detection
- Dimensions of the housing are 7 x 7 x 6 mm
- Supply voltage: 5V
- Maximum diode current: 50 mA
- Maximum collector-emitter voltage: 32V
- Maximum collector current of 50 mA
- Quantity: 2 units

  Perfect "Kit XXL Mega Sensors" to learn programming with Arduino, the basis of electronics. It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
100% suitable with screen, RFID and keyboard.   Characteristic:   It includes the following module references:   - 1x Mega2560 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor
- 1x fire sensor
- 3x Photoresistor GL5516 LDR

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.
HC-SR04 Ultrasonic Sensor Distance Measuring Module features:
- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm
- Quantity: 1 unit
Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:
Automatic robot operation with obstacle detection />

Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º.
An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features:
- Infrared sensor with control circuit
- Adjustable sensitivity and time
- Operating voltage: 4.5V- 20V
- Consumption in Idle state:

Kit electronic components for Arduino UNO Mega.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x Protoboard Breadbord 400 points Arduino
- 20x Male-Male Cables 20cm Jumpers Dupont 2,54
- 1x LED Diode Assortment Kit 30 pcs 5mm red, green, yellow
- Resistors:
 - 10x Resistors 200R Ohm 5% 0,25W 1/4W
 - 10x Resistors 1K Ohm 5% 0,25W 1/4W
 - 10x Resistors 10K Ohm 5% 0,25W 1/4W
 - 10x Resistors 100K Ohm 5% 0,25W 1/4W
- 2x Photoresistor GL5516 LDR
- Push switch buttons:
 - 1x Push Switch Button B3F Omron Blue Key 12mm

Level sensor for liquids with float.
The liquid level sensor acts as a switch. The state is changed by means of a magnet located on the float. It can be used to detect liquid levels that are too high or too low.
Ideal for all those applications where it is necessary to control the level of non-corrosive liquids such as water tanks, aquariums.
Characteristic:
- Maximum Load: 50W
- Maximum Switching Voltage: 250V
- Maximum Switching Current: 0.5A
- Maximum charging current: 1A
- Operating temperature: -10ºC to + 60ºC
- Size: 58mm x 18mm

check it Contenido:
- 20x Cable macho-macho 20cm - 10x Cable hembra-macho 20cm - Kit de diodos LED - 20 unidades ( 5x rojo, 5x verde, 5x amarillo, 5x blanco) Resistencias:
- 220R- 10 unidades
- 10k- 5 unidades
- 1k-   5 unidades
- Transistor TIP120 TO-220 - 1 unidad
- Diodo LED RGB - 1 unidad
- Condensador electrolítico 470uF/50V - 2 unidades check it Content:
- Prototype plate 400 points
- 20x Cable Jumper mach-macho
- LED diode kit - 30 units (10x red, 10x green, 10x yellow) Resistances:
- 100k- 10 units
- 10k- 10 units
- 1k- 10 units
- 220R- 10 units
- Photoresistor GL5516 Type LDR 10k - 2 units
- Push buttons Omron B3F Blue, Red, White - 3 units
- 100uF / 50V electrolytic capacitor - 5 units

Encapsulated with water resistant stainless steel with sensor dimensions 6 * 50mm, cable length 300 cm. DS18B20 Waterproof Digital Temperature Sensor Probe 3m features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 ° C to 125 ° C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
             - Vcc red
             - Yellow digital output
- Inocidable steel
- Cable length: 3m

The perfect Arduino sensor kit to start learning about the world of electronics with Arduino. It comes with our step-by-step guide to each sensor, as well as its libraries. 

M18 Inductive Proximity Sensor features:
- Inductive proximity sensor detection switch LJ18A3-8-Z / BX
- NPN DC6-36V
- A Often used for 3D printer bed leveling
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- NPN NO (Normal Open )
- Detecting distance 8mm
- DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum - Operating temperature -25 ° C to + 70 ° C (Non-freezing condition)
- Head diameter 18 mm
- Size 6.9 x 2cm
- Cable length 90cm

Ethanol alcohol sensor module.
MQ gas sensor uses a small indoor heater with an electrochemical sensor.
When the alcohol molecules in the air comply with the electrode the ethanol "changes" into acetic acid and then more current is produced.
MQ-3 Alcohol Sensor Module Ethanol Breathalyzer features:
- Main chip: alcohol sensor MQ-3 and comparator LM393
- Working voltage: 5V
- Current: 150mA
- Digital output: TTL 0/1
- Analog output: analog voltage sensing value
- Detection concentration:
- 0.05mg/L - 10mg/L
- Quick response features:
- Adjustable sensitivity with the potentiometer
- Size: 32mm x 20mmx 18mm

The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement.
This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree. DHT22/AM2302 Temperature Humidity Sensor features:
- Voltage Operating: 3 to 5.5 VDC
- Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy - Maximum sampling rate: 2 seconds

Also available with waterproof casing and 100cm cable and 200cm. DS18B20 Temperature Sensor TO-92 0.5ºC Precision 5V Integrated features:
- Device function: Temperature sensor
- Type of output: Digital
- Supply voltage: 3V to 5.5V
- Accuracy: ± 0.5ºC
- Temperature threshold: Programmable
- Operating temperature: -55ºC to + 125ºC
- Encapsulated: TO-92
- Supply current: 1.5mA

Precision Temperature Sensor TO-92 LM335 LM335Z-ST features:
- Power supply from 5 to 30 Vdc
- Connection through analog input
- Temperature range from -40ºC to 100ºC
- Linearity +10 mV / ºK
- Accuracy of measurement: ± 2 ° C
- Manufacturer: Texas Instruments

Encapsulated with water resistant stainless steel with sensor dimensions 5.5*50mm, cable length 200 cm. DS18B20 Probe 2m Submersible Temperature Sensor features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Vcc red
      - Yellow digital output
- Inocidable steel
- Cable length: 2m  

Kit Funduino I / O Expansion starter kit for Arduino UNO R3.
Kit 37 Sensors in a Box for Arduino features:
Including the referencias of módulos siguientes: - 1x módulo Funduino I / O Expansion
- 1x módulo zumbador activo Keyes
- 1x módulo foto resistencia Keyes
- 1x módulo sensor of temperatura Keyes
- 4x módulos sensor LED sombrero of Keyes paja
- 1x módulo sensor of sonido Keyes
- 1x módulo sensor Rotation Keyes
- 1x pulsador módulo
- 1x distancia sensor HC-SR04
- 1x módulo Joystick Doble 2 Ejes XY
- 1x servo 9g SG90
- 9x Dupont cables con conector 3 pins
- 20x Hembra-Macho Cables 20cm
- 1x USB cable for Arduino UNO Tipo A-B 50cm Helpful Links:
Install the IDE Arduino development interface

LM35 Temperature Sensor LM35DZ TO92 features:
- The output is linear and each degree Celsius equals 10 mV
- Power supply from 4 to 30 Vdc
- Connection through analog input
- Temperature range from 0ºC to 100ºC
- Linearity +10 mV / ºC
- Quantity: 1 unit

Contents Makey Makey Board USB Cable 7 Alligator Clips 6 Connector Wires Instructions with Visual Project Start Guide Online Documentation 20 Color Stickers Start out easy with a banana piano. First setup takes seconds. Then make games controllers, musical instruments, and countless inventions. Advance to additional inputs and multi-key remapping up to 18 keys.
Turn everyday objects like bananas into touchpads! Connect the world around you to your computer! Setup takes just seconds. Just plug, clip, and play! No programing knowledge needed. No software to install. Works with Mac and Windows.
1000s of possibilities! Draw your own game controller, sneak a cat selfie, and dance like never before.
Ages 8 to infinity.

Sound detection module for Arduino projects, smart cars. Analogical Acoustic Sensor 4-Pin Microphone Sound Detector Module features:
- Adjustable High Sensitivity Acoustic Sensor
- LM393 comparator chip
- Integrated indicator LED
- AO analog output, output voltage signal in time real microphone
- DO digital output, sensitivity adjustable through potentiometer
- Frequency Range between 30 and 15000 Hz
- Power 4 ~ 6V
- Measurements 36x16x15mm

Perfect "Mega XXL Darwin Kit" to learn programming and electronics with Arduino. It allows you to build various projects of varying complexity, from the easiest... to the most complicated. The elements are placed in the box to keep everything in order.

5.8GHz Doppler Radar Motion Sensor features:
- Microwave motion detector module
- The main applications can be security alarms and sensors, Automatic door systems, ATM machines, car reverse systems, light sensors, can also be used for traffic monitoring and monitoring applications.
- High resistance to radio-frequency interference
- Frequency: 5.8GHz
- Operating Voltage: 3.3V - 20V TTL 3.3V
- Standby Current: 3mA
- Detection Range: 3-8 meters, 360 degrees
- Power of Output: 2mW
- Dimensions: 32x23 mm
- R6 - time-delay; initial value 2.2k - 1s, without delay resistance 30s, can be adjusted up to 250k
- R9 - for sensitivity adjustment

This new official Arduino Stuff online starter kit is the perfect kit to start your adventure with Arduino. It offers everything you need to introduce your home or environment to the world of home automation and Smart Home. This programmable platform consists of various sensors, touch buttons, actuators, and even a screen, all embedded inside a sophisticated spherical housing, allowing you to add smart connectivity to your devices.

The 8 projects included in the Oplà IoT Kit allow users to turn everyday devices into intelligent devices, which can be remotely controlled from a mobile phone.

Sensor used to measure the current in the circuit to which it is connected. Characteristic: - Output: Analog
- Power: 5V
- Accuracy: 1.5%
- Measuring capacity: +/- 30A
- Dimensions: 31 x 13 mm

The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel.

Discover the unlimited potential of robotics and mechanics with BRACCIO!

The humidity sensor DHT11 comes in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. DHT11 Temperature and Humidity Sensor features:
- Operating voltage: 3 to 5 VDC
- Humidity measurement range: 20-95% ± 5% accuracy
- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy
- Maximum sampling rate: 2 seconds
- Working current 2.5mA
- Iterfaz 1-wire
- Dimensions: 2.3 x1.2x 0.5cm
- Quantity: 1 unit

Perfect "Kit XXL Sensors" to learn programming with Arduino, the basis of electronics. It allows to build various projects of various complexity, from the easiest ... to the most complicated. The elements are placed in the box to keep everything in order. The kit does not include an Arduino board. An original Arduino board or a Chinese equivalent can be purchased separately.  

- The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement - This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree
Characteristic:
- Operating voltage: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy
- Maximum sampling rate: 2 seconds
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Write texts on the OLED 0.96 '' screen
- Read the measurements of the temperature / humidity sensor DHT22 / AM2302 on a 0.96 '' OLED screen
Send />

Perfect kit to learn programming in the middle of Arduino the basic of electronics It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.  The kit does not include an Arduino board. An original Arduino board or a Chinese equivalent can be purchased separately.  

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer features:
- This sensor can be configured as auto Z axis level
- Sensor detection switch inductive proximity LJ12A3-4-Z / BY
- PNP DC6-36V
- Often used for 3D printer bed leveling
- Typical application: printer bed level sensor 3D
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- PNP NO (Normal Open)
- Detecting Distance 4mm - DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum
- Operating temperature -25 ° C at + 55 ° C (Non-freezing condition)
- Head diameter 12 mm
- Size 6.2 x 2cm
- Cable length 100cm

Ideal for projects with ARDUINO, Smart Car. Sensor Module Infrared Obstacle Detector Car Robot features:
- Power supply: 3.3 - 5V DC
- OUT level 0/1 output
- Sensitivity adjustment
- Power LED
- Distance from detection: 2 - 30cm (max60cm)
- detection angle: 35º
- LED output status indicator
- Dimensions: 40x13x8mm

MQ-2 Gas and Smoke Module Sensor Detector Methane Propane Butane LPG features:
- Main chip: MQ-2 flammable gas and smoke sensor and comparator LM393
- Working voltage: 5V
- Current: 150mA
- Digital output: TTL 0/1
- Analog output: analog voltage sensing value
- Quick response features:
- Concentration detection:
  200ppm - 5000ppm LPG, propane
  300ppm - 5000ppm butane
  5000ppm - 20000ppm methane
  300ppm - 5000ppm H2
  100ppm -2000ppm alcohol
- Adjustable sensitivity with the potentiometer
- Size: 32mm x 20mmx 18mm

MQ-4 Gas Methane Sensor Module for Arduino features:
- Main chip: MQ-4 methane sensor and comparator LM393
- Working voltage: 5V
- Current: 150mA
- Digital output: TTL 0/1
- Analog output: analog voltage sensing value
- Quick response features:
- Detection concentration:
200ppm- 10000ppm CH4, natural gas
- Adjustable sensitivity with the potentiometer
- Size: 32mm x 20mmx 18mm