Kit Mega XXL Darwin for Arduino

Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins.  Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules.

Kit Funduino I / O Expansion starter kit for Arduino UNO R3.
Kit 37 Sensors in a Box for Arduino features:
Including the referencias of módulos siguientes: - 1x módulo Funduino I / O Expansion
- 1x módulo zumbador activo Keyes
- 1x módulo foto resistencia Keyes
- 1x módulo sensor of temperatura Keyes
- 4x módulos sensor LED sombrero of Keyes paja
- 1x módulo sensor of sonido Keyes
- 1x módulo sensor Rotation Keyes
- 1x pulsador módulo
- 1x distancia sensor HC-SR04
- 1x módulo Joystick Doble 2 Ejes XY
- 1x servo 9g SG90
- 9x Dupont cables con conector 3 pins
- 20x Hembra-Macho Cables 20cm
- 1x USB cable for Arduino UNO Tipo A-B 50cm Helpful Links:
Install the IDE Arduino development interface

check it Contenido:
- 20x Cable macho-macho 20cm - 10x Cable hembra-macho 20cm - Kit de diodos LED - 20 unidades ( 5x rojo, 5x verde, 5x amarillo, 5x blanco) Resistencias:
- 220R- 10 unidades
- 10k- 5 unidades
- 1k-   5 unidades
- Transistor TIP120 TO-220 - 1 unidad
- Diodo LED RGB - 1 unidad
- Condensador electrolítico 470uF/50V - 2 unidades check it Content:
- Prototype plate 400 points
- 20x Cable Jumper mach-macho
- LED diode kit - 30 units (10x red, 10x green, 10x yellow) Resistances:
- 100k- 10 units
- 10k- 10 units
- 1k- 10 units
- 220R- 10 units
- Photoresistor GL5516 Type LDR 10k - 2 units
- Push buttons Omron B3F Blue, Red, White - 3 units
- 100uF / 50V electrolytic capacitor - 5 units

Gravity: Starter Kit for Arduino is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. The Gravity Kit presented here is equipped with numerous electronic components, such as a motherboard that works with the Arduino Uno - DFRduino Uno v3. DFRobot Gravity IO Expansion shield for Arduino is enclosed as well.

This starter kit aims to quickly get you connected to Seeed Studio BeagleBone® Green. It contains 10 Grove modules and we provide you with 3 step-by-step projects to get you started quickly with all modules. The set comes in a handy box and is attractively priced!

The Makey Makey clone board - economic and compatible - is small and has a USB port to connect it to a computer and alligator clips to connect other objects. Just plug, clip and play, no programming skills or cumbersome software installation required. With a set-up in seconds, your child can get inventing, whether at home or in the classroom.

Perfect kit to learn programming in the middle of Arduino the basic of electronics It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.   Characteristic:   It includes the following module references:   - 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x ProtoShield Prototype Expansion Board with Mini Breadboard 170 points for Arduino Proto V5.0
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor

The Arduino Engineering Kit Rev 2 is a versatile and practical learning tool. By creating fun, real-world projects, you can understand basic engineering and mechatronics concepts and learn to program in MATLAB and Simulink. The versatility of the elements gives you the opportunity to adapt the content and create your own curriculum based on it. The kit includes online courseware, step-by-step instructions, lessons and exercises. It works best when studying in small groups.

Starter kit with the UNO R3 module sensors in a box for Arduino.
Compatible with Arduino
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module
- 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x USBASP Programmer Adapter Cable Atmega8 Atmega128 AVR
- 5x Push Switch Button B3F Omron Yellow Key
- 1x Linear 5K Potentiometer OHM kΩ

Perfect kit to learn programming and electronics in the middle of Arduino. This kit includes a manual in Spanish with 20 basic projects. It allows to build various projects of varying complexity, from the easiest ... to the most complicated. The kit does not include an Arduino board. To put it, you can buy an original Arduino board or a Chinese equivalent separately.