Grove Starter Kit for Seeed Studio BeagleBone® Green

This BeagleBone® Green Gateway development board is a powerful single board computer (SBC). It is based on Seeed Studio's open source hardware and integrates the functions of Wi-Fi + Bluetooth (BLE) + Ethernet +2 Grove connectors, plus a NEON floating point accelerator and 3D graphics. All in one compact board!

This BeagleBone® development board is a powerful single board computer (SBC) Open source hardware design.

Seeed Studio BeagleBone® Green Wireless Development Board(TI AM335x WiFi+BT)

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we can measure the pulse width PWM depending on the distance of the obstacle.
Mounting bracket is ideal for installing the sensor on mobile platforms such as robots, vehicles, etc. HC-SR04 + Ultrasonic Sensor Support Arduino features:
- Supply voltage: 5V (4.5V-6V)
- Consumption: typical 30 mA, (35 mA max)
- Interface: VCC, GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED measurement indicator in progress
- Frequency: 40 kHz for 200 μs
- Size: 30 mm x 20 mm Feature of the support: - Material: Acrylic
- Transparent color
- Includes screws

Mini electricity generator, built base on a turbine and an electric generator that converts kinetic energy into electricity. The generator output is rectified and regulated for a maximum of 12V. Please note -if we want to generate more current, the turbine will oppose the greater resistance to the flow of water, and the voltage may drop if the water flow is not sufficient. This generator is made of plastic and the turbine is totally isolated from the generator and rectifier, the outputs are 1/2 "usually found in domestic pipes.

This module is a dust sensor capable of detecting more than one micron of dust particles.
It has two types of output: output of 4V high-level signal for a clean environment and 0.7V low-level signal for a particle-laden environment.
Its power supply is 5VDC and the particle detection range is maximum at 8000 units per 283ml. Dust Sensor Module PPD42NS PM2.5 features:
- Supply voltage: 5VDC
- Working current: 90mA
- Sensitivity: 0.5V / ( 0.1 mg / m3)
- Particle detection minimum value: 1 micron
- Output mode: Hi = 4V impulses (clean environment); Lo = 0.7V (charged environment)
- Temperature working: 0-45 ° C
- Working humidity: 0-90% RH
- PCB size: 59x45x22 mm

This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person.

The BME280 is an environmental sensor (SEN0236) integrating a temperature sensor, a humidity sensor and a barometer. Powered from 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 0 %RH to 100 %RH, pressure: 300 hPa to 1100 hPa.

Precision Temperature Sensor TO-92 LM335 LM335Z-ST features:
- Power supply from 5 to 30 Vdc
- Connection through analog input
- Temperature range from -40ºC to 100ºC
- Linearity +10 mV / ºK
- Accuracy of measurement: ± 2 ° C
- Manufacturer: Texas Instruments

EMG Muscle Signal Sensor Signal Electromyography features:
EMG Muscle signal sensor module kit with 6 disposable electrodes The EMG sensor serves as a bridge to detect small electrical pulses product of
muscle activity and transform them into a signal recognizable by Arduino. NOTE: DO NOT USE THIS SENSOR FOR MEDICAL PURPOSES.
Code Examples: https: //github.com/AdvancerTechnologies/MuscleSensorV3

Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. it comes with headers attached

Characteristic: - Supply voltage: 4.5V- 5.5V
- Consumption: 30 mA typical
- Analog output
- Range: 10cm to 80cm
- Dimensions: 29x12mm
- Cable length: 20cm GP2Y0A21YK0F Sharp Analog IR distance sensor 10CM-80CM Arduino

Three-axis electromagnetic field sensor module GY-273 including the HMC5883L chip that specifies the direction of the magnetic field of the ground.
Digital Compass GY-273 Compas Magnetometer features:

• Supply voltage: 2.16 - 3.6 VDC,
• I2C interface with SCL, SDA,
• signals - Measurement range: 1.3 to 8 Gauss,
• Measurement resolution: 12 bits,
• Measurement accuracy: 0.73 - 4.35 Gauss,
• Transmission speed 400kHz, 
• Sensitivity 230-1370 LSB / Gs,
• Output frequency: 75Hz,
• DRDY pin interruption,
• Dimensions of 18 mm x 13 mm.