ARDUINO PORTENTA VISION Shield Ethernet It is the ideal industrial upgrade for the powerful Arduino Portenta H7 that adds a low power Himax camera, two microphones, Ethernet connectivity and microSD slot, everything you need for the fast creation of cutting-edge ML applications. Code ASX21 Backorder Price €57.90
Arduino Uno R3 Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog Code BAR66 Available Price €23.99
Arduino Nano Every Arduino has decided to further develop its catchy Nano project in the direction of more power. Nano Every is the simplest of the new series as it doesn´t include any sensors nor connectivity solution, however still significantly more powerful than standard Nano (50% more program memory and 2 times more RAM). Above characteristics make it perfect for projects of small devices with more advanced functionalities, such as audio processing or robotics. Code BAR33 ✗ Out-of-Stock Price €20.99
Arduino Pro PORTENTA H7 The Arduino Portenta H7 represents a new family of chips designed for IoT applications. The board uses the STM32H747 microcontroller equipped with Cortex-M7 and Cortex-M4 cores, which allows it to run programs written in Arduino®, MicroPython or JavaScript. In addition, the Arduino Portent H7 is characterised by high performance and at the same time energy efficiency. Code ABX42 Available Price €125.99
Arduino Uno Rev3 SMD Arduino Uno R3 SMD is a variation of the Uno with SMD. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power connector, an ICSP header and a reset button. In addition, Uno SMD offers the following additional features: - ATmega16U2 instead of 8U2 as a USB to serial converter - 1.0 Code A000073 Backorder Price €24.99
Arduino Nano 33 Iot Nano 33 IoT as the name would suggest is an WiFi enabled version of the famous Nano. It has an upgraded microcontroller to ARM Cortex SAMD21 y el módulo NINA-W10 (based on ESP32) from u-blox and a module IMU LSM6DS3. Code BAR32 Available Price €26.99
Arduino Uno Wifi Rev2 Imagine the simplicity of the Arduino One connected to the communication module. Seems too good to be true, right? That's Arduino One WiFi. Arduino Uno WiFi REV2 (ABX00021) with its integrated IMU (Inertial Measurement Unit) and WiFi is the ideal board to start making your first Internet application from scratch, or to use in the educational field. It has 14 digital input / output pins (5 of which are PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, an accelerometer, an RGB LED, a power connector and an ICSP header. Code BAR21 Available Regular price €56.59 -€5.00 Price €51.59
Arduino Nano 33 Ble Nano was already a great invention and a super facilitator of many projects, but with Nano BLE opens yet another set of opportunities. First of all, the BLE module - the newest and lowest energy consumption connectivity solution, which effectively allows you to leverage the same technology as used in the newest mass-produced electronic devices Code BAR34 Available Price €33.99
Arduino MKR FOX 1200 (without antenna) The Arduino MKR FOX 1200 board offers a practical and cost-effective solution for adding Sigfox connectivity to projects requiring low power. Code ABX14R ✗ Out-of-Stock Price €43.49
Arduino Micro Arduino Micro is based on the same architecture as Arduino Leonardo, but with a smaller form factor, which allows for easy placement on the test plates. That is, it has almost the same functionality but with a much smaller size. And that of size. As we all know, in electronics has meant a lot during the last decades (see example of computers). Developed together with Adafruit, the Leonardo has 20 digital input / output pins of which 7 can be used as PWM outputs and 6 analogue inputs, a 16 MHz crystal oscillator, a micro USB connection, an ICSP header and a reset button. The important thing is also that it comes already equipped with the USB despite its small size because we don't need to install an additional converter. Code BAR53 Backorder Price €23.34
Arduino Nano Arduino Nano A000005 is the smaller, friendlier version of Uno's badge. Perfect for IoT applications and for mobile device prototypes. This board is based on the ATmega328 and has a wide range of applications, thanks to its small size and flexibility. Code BAR05 ✗ Out-of-Stock Price €25.39
Arduino Nano 33 Ble Sense rev2 On top of all the upgrades presented in Nano BLE (64 MHz clock, 1Mb flash memory, 256Kb SRAM) Nano BLE Sense Rev2 brings basic sensors to the table. It is truly impressive how Arduino team managed to fit those on such a small factor, nonetheless they did and did so for 5 basic modules. In the package, you get 9 axis IMU, humidity and temperature sensor, barometric sensor, microphone and vision sensor (gesture, proximity, color and light intensity). Such a set together with TensorFlow compatibility enables basic machine learning functionalities straight after taking the board out of the box. Code BAR35 Available Price €49.49
Arduino Nano RP2040 Connect with headers Arduino Nano RP2040 Connect ABX00053 is the first Raspberry Pi SoC board. The smallest and most versatile plug&play board with dual core, connectivity, audio and machine learning capabilities. Code ABX053 Available Price €34.99
Arduino Mega 2560 Rev3 Arduino Mega 2560 R3 A000067 has been designed with larger and more ambitious projects in mind. It has 54 digital input / output pins (15 of which can be used as PWM outputs), 16 analog inputs, 4 UART (i.e. hardware serial ports). The large number of analog and digital pins, along with larger MEMORY, make the Mega 2560 ideal for devices such as 3D printers and other demanding applications. The Mega 2560 board is compatible with most shields designed for Arduino Uno. Code BAR67 Available Regular price €49.99 -€5.00 Price €44.99
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
Arduino Due Arduino Due is the perfect board for powerful large-scale Arduino projects. This is the only Arduino microcontroller based on the Microchip SAM3X8E with an Arm Cortex-M3® processor. If other basic boards are not enough for your ideas and demands, this one will surely satisfy them. Add to this 54 pins (54 digital input/output pins, 12 analog inputs, 2 DAC, 2 CAN and 4 UARTS) and you have a board that will not stop before any obstacle. Code BAR62 Last items in stock Price €56.00
Arduino Edge Control A remote monitoring and control solution, optimised for outdoor environments. Collect real-time data from smart sensors and leverage everything to the edge, in your smart farm management. Code AKX034 Backorder Price €216.59
Arduino Leonardo The Arduino Leonardo is one of the most popular versions of the series, behind only the legendary Uno plate to which it has very similar features (see our comparison below). The board contains a microcontroller ATmega32u4 with the participation of 20 digital inputs/outputs, of which 7 can be used as PWM outputs and 6 analog inputs. The system works with the clock signal with the frequency of 16 MHz, has 32K Flash and 2.5 KB of SRAM RAM. Code BAR57 ✗ Out-of-Stock Price €22.13
Arduino Mkr Wifi 1010 Arduino MKR WiFi 1010 ( ABX00023 ) es la evolución del MKR1000 y está equipado con un módulo ESP32 de u-blox. Su objetivo es acelerar y simplificar la creación de prototipos de aplicaciones IoT basadas en WiFi gracias a la flexibilidad del módulo ESP32 y su bajo consumo de energía. CONECTIVIDAD USB MICRO TIPO B WIFI & BLE Code ABX023 Last items in stock Price €46.90
Arduino NICLA Vision Nicla Vision combines a powerful STM32H747AII6 Dual ARM® Cortex® M7/M4 IC processor with a TinyML-enabled 2 MP colour camera, as well as a smart 6-axis motion sensor, integrated microphone and distance sensor. Supports MicroPython, and offers WiFi and Bluetooth® Low Energy connectivity. Code ABX00051 Last items in stock Price €120.99
ARDUINO UNO R4 WIFI Arduino Uno R4 WiFi is the original Arduino Uno module with the powerful 32-bit Renesas RA4M1 ARM Cortex M4 ARM Cortex M4 microcontroller. The board is equipped with 256 kB of Flash memory and 32 kB of SRAM, 14 digital I/O, including 6 PWM, 6 ADC and 1 DAC. Popular communication interfaces such as SPI, I2C, UART and CAN are available. It operates with a voltage of 5 V. The ESP32-S3-Mini chip handles WiFi and Bluetooth communication. The Uno R4 WiFi features a 12x8 matrix of addressable red LEDs as well as a Qwiic connector. Code ABX00087 Backorder Price €31.59
SparkFun Qwiic HAT for Raspberry Pi The Qwiic HAT is an absolute basic of Qwiic system for Raspberry. It enables a quick and efficient connection of an sensor to your Raspberry over I2C bus (GND, 3.3 V, SDA and SCL). As Qwiic enables daisy chaining of components, you can pretty much install as many sensors on the Qwiic HAT as you want. On top of that it fits perfectly Pi Tin enclosure from SparkFun enabling connection while in case. Code SP031 Available Price €7.99
Arduino NICLA Voice Nicla Voice combines a powerful Syntiant® NDP120 Neural Decision Processor™ (NDP), a high-performance IM69D130 microphone, a BMI270 6-axis intelligent motion sensor, a BMM150 3-axis magnetometer and Bluetooth® Low Energy connectivity. Code ABX00061 Last items in stock Price €95.59
SparkFun 16x2 SerLCD - Black on RGB 3.3V This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself. We have the same screen with a reverse color version, i.e. RGB on black with a reference of SP028 Code SP028 Last items in stock Regular price €27.99 -€10.00 Price €17.99
Arduino Mkr Wan 1300 - Obsolete Arduino MKR WAN 1300 tiene el mismo factor de forma que las otras placas Arduino MKR y ofrece mucha funcionalidad en un paquete muy pequeno. Utiliza el microcontrolador Atmel SAMD21 y el módulo Murata MCWX1ZZABZ LoRa para la conectividad. El MKR WAN 1300 ha sido disenado para conectar proyectos y aplicaciones con conectividad LoRa. Code ABX00017
SparkFun 16x2 SerLCD - RGB on Black 3.3V This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself. We have the same screen with a reverse color version, i.e. black on RGB with a reference of SP028 Code SP027 Last items in stock Regular price €27.99 -€10.00 Price €17.99
Arduino NICLA Sense ME Nicla Sense ME is the smallest Arduino-developed board equipped with a range of the latest Bosch environmental and motion sensors. The module is based on the nRF52832 ARM Cortex M4 chip clocked at 64 MHz with 512 kB of Flash, 64 kB of RAM and 2 MB of SPI Flash and 2 MB of QSPI embedded memory. The Nicla Sense ME features the Bosch BHI260AP, BMP390, BMM150 and BME688 embedded sensors. Code ABX00050 Last items in stock Price €95.59
SparkFun FTDI Basic Breakout - 3.3V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP024 Available Price €19.99
SparkFun FTDI Basic Breakout - 5V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP023 Available Price €19.99
SparkFun ESP32 Thing The SparkFun ESP32 thing is an upgrade to boards based on the popular ESP8266. What the 32 version has to offer on top? Well one of the largest upgrades is support for Bluetooth communications and nearly 30 I/O pins. Makes it pretty perfect for any IoT solution, right? Code SP009 Last items in stock Price €27.99
SparkFun ESP8266 Thing - Dev Board (with Headers) ESP8266 Thing Dev board from Sparkfun is a reliable, strong solution for IoT projects. The ESP8266 is a well-known WiFi controller from the boards such as NodeMcu and or WeMos. This board increases the reliability to maximum though. This version comes with headers. Code SP008 Last items in stock Price €21.99
SparkFun ESP8266 Thing - Dev Board (wo headers) ESP8266 Thing Dev board from Sparkfun is a reliable, strong solution for IoT projects. The ESP8266 is a well-known WiFi controller from the boards such as NodeMcu and or WeMos. This board increases the reliability to maximum though. This version comes without headers. Code SP007 Last items in stock Price €25.99
SparkFun Pi Servo HAT - Obsolete 16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal. You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper. Code SP0016 ✗ Out-of-Stock Price €16.99
SparkFun Pi AVR Programmer HAT - OBSOLETE You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following. The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects. Code SP0017
Arduino Starter Kit Classroom Pack The ideal package for teachers looking for classroom solutions that introduce programming and electronics through fun and engaging interactive projects. It is a ready-made package with the curriculum available for ready-made classes - it comes with a booklet of 15 introduction classes written by Arduino team. The Arduino Starter Kit class package is a solution package, containing six of the popular Arduino Starter Kits. This classroom package is for a classroom of at least twelve students - the recommended ratio is two students per kit - and is intended for use by middle school teachers looking for a comprehensive educational solution based on the Arduino platform. Code KA007 Last items in stock Price €599.00
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
Arduino Kit Starter Oficial Arduino Starter Kit is a perfect kit to start your adventure with Arduino. It offers a range of original components, which ensure compatibility with all Arduino parts and give you access to full range of official materials. Additionally, you get a 15 projects booklet, which is pretty much all you need to start rolling with your Arduino projects Code KA002 Available Price €105.95
SparkFun WiFi Shield - ESP8266 The SparkFun WiFi ESP8266 Shield is a shield for Arduino R3 R3 board enabling internet connection. ESP8266 as you all know is a solid fundament for any IoT project an in this version it can be simply and easily put on your board. It is a great middle ground between the sole module and the development board such NodeMcu or WeMos. So if you need a relatively cheap and super reliable way to internet for your Arduino project - this is the shield for you! ESP8266 shield WiFi comes with an AT-command firmware, hence can be controlled by any UART. It works great with any Arduino R· layout. The shield doesn´t have the headers on. Code SP006 Last items in stock Price €21.99
Arduino Oplà IoT Kit - Spanish - Official Internet of Things Kit This new official Arduino Stuff online starter kit is the perfect kit to start your adventure with Arduino. It offers everything you need to introduce your home or environment to the world of home automation and Smart Home. This programmable platform consists of various sensors, touch buttons, actuators, and even a screen, all embedded inside a sophisticated spherical housing, allowing you to add smart connectivity to your devices. The 8 projects included in the Oplà IoT Kit allow users to turn everyday devices into intelligent devices, which can be remotely controlled from a mobile phone. Code AKX26 Last items in stock Price €145.90
SparkFun Ardumoto - Motor Driver Shield The Ardumoto Shield was created based on the L298 H-bridge as a two-motor controller for Arduino. It was designed to be able to drive two DC motors up to 2A per channel. Together with its Arduino, it will provide the perfect platform to control RC vehicles, or small autonomous robots. Its use has been made easier, LEDs with control signal have been added and the possibilities for advanced users have been increased. Code SP011 Available Price €23.99
TinkerKit Braccio Robot Arduino - Robot Arm 6 DOF The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel. Discover the unlimited potential of robotics and mechanics with BRACCIO! Code T050000 Available Regular price €286.49 -€30.00 Price €256.49
Arduino PORTENTA Breakout Board The Portenta Breakout module extends the capabilities of the Arduino Portenta module with additional connectors and cables. The module includes a power switch, a DIP switch for selecting the start mode of the Arduino Portenta, as well as a series of connectors: USB A, RJ5, microSD, OpenMW, MIPI 20T JTAG. The board also includes the RTC chip, as well as a slot for the CR2032 battery, a screw connector for the power supply and all the cables for the Arduino Portenta module. Code ASX00031 Available Regular price €54.95 -€4.96 Price €49.99
MyoWare Cable Shield This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person. Code SP072 Backorder Price €6.49
MyoWare Shield - Mini protoboard for MyoWare sensor Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid. Code SP070 Last items in stock Price €3.29
Arduino Engineering Kit REV2 The Arduino Engineering Kit Rev 2 is a versatile and practical learning tool. By creating fun, real-world projects, you can understand basic engineering and mechatronics concepts and learn to program in MATLAB and Simulink. The versatility of the elements gives you the opportunity to adapt the content and create your own curriculum based on it. The kit includes online courseware, step-by-step instructions, lessons and exercises. It works best when studying in small groups. Code AKX022 Available Regular price €289.95 -€15.00 Price €274.95
MyoWare Muscle Sensor Development Kit - OBSOLETE This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together. Code SP074
MyoWare Power Shield MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V. Code SP071 Backorder Price €6.49
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Available Price €8.99
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89
MyoWare 2.0 Cable Shield This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person. Code SP045 Available Price €7.49
SparkFun micro:climate kit for micro:bit - v3.0 The SparkFun micro:Climate kit is a complete weather station kit that builds on the weather:bit carrier board with weather and soil moisture sensors, all powered by the micro:bit. board. Code SP073 Backorder Price €179.00
SparkFun DataLogger IoT - 9DoF SparkFun DataLogger IoT - 9DoF is a pre-programmed data logger to automatically log IMU, GPS and various pressure, humidity and distance sensors - all without having to write a single line of code! DataLogger automatically detects, configures and logs Qwiic sensors. It is specifically designed for users who only need to capture a large amount of data in a CSV or JSON file and return it to their larger project. Code SP099 Last items in stock Price €94.90
Teensy 4.0 It's a tiny board, programmable from the Arduino IDE, that hides enormous potential. The Teensy 4.0 is equipped with a 32-bit ARM Cortex-M7 processor at a blazingly fast 600 MHz. The use of the NXP iMXRT1062 chip makes the Teensy 4.0 the fastest microcontroller on the market at launch. Code SP101 Available Price €37.89
SparkFun Qwiic Shield for Teensy SparkFun Qwiic Shield for Teensy is a quick and easy way to prepare an expansion board equipped with Qwiic connectors . This shield is compatible with Teensy 4.0, Teensy 3.2 and Teensy LC boards. The board is equipped with an I2C bus connector (GND, 3.3 V, SDA and SCL) and four SparkFun Qwiic connectors Code SP102 Available Price €5.95
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Last items in stock Price €109.90
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (with Headers) Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. it comes with headers attached Code SP001 Available Price €16.99
SparkFun Triple Axis Accelerometer Breakout - ADXL335 This accelometer is powered with 1.8 to 3.6V and consumes only up to 320 uA of current. The circuit fits on the small 18mm on 18mm board and is fully compatible with Arudino Code SP002 Available Price €21.99
SparkFun Triple Axis Accelerometer Breakout - LIS331 This board features and extremely low power LIS331HH accelerometer. The unit is a MEMS three axis linear accelerometer with a I2C- SPI serial interface enabling use with embedded applications. The range of measurement includes three options +-6g/+-12g/+-24g and enables datalogging with output rates fro 0.5 Hz to 1kHz. Check this and plenty of other accelerometers in our offering of both Sparkfun and other producers Code SP003 Available Price €18.95
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (wo headers) Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. it comes with headers attached It is a version without headers of a popular BOB-09868 from SparkFun. In our offer, we have a versuib with headers (SP0001) and with QWIC system (SP0005). Code SP004 Last items in stock Price €16.99