Tools

DC 10V Analog Panel Voltmeter 0 to 10V features:
- 10V 0-10V DC analog voltage meter
- Type: Analog voltage meter
- Range of scale: DC 0-10V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

DC 15V Analog Panel Voltmeter 0 to 15V features:
- DC 15V 0-15V analog voltage meter
- Type: Analog voltage meter
- Range of scale: DC 0-15V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

DC 20V Analog Panel Voltmeter 0 to 20V features:
- 20V DC 0-20V analog voltage panel meter
- Type: Analog voltage meter
- Range of scale: DC 0-20V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

Soldering Station 48W features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 480 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

DC 30V Analog Panel Voltmeter 0 to 30V features:
- 30V 0-30V DC analog voltage meter
- Type: Analog voltage meter
- Range of scale: DC 0-30V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

DC 40V Analog Panel Voltmeter 0 to 40V features:
- DC 40V 0-40V analog voltage meter
- Type: Analog voltage meter
- Range of scale: DC 0-40V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

Soldering Iron Tin 60W Dual Watt 30W Replaceable Tip features:
- Power: 30W/60W
- Power: 220V-240V
- Equipped with B3 tip
- Long duration tip
- Certifications CE, RoHS
- Blister packaging
- Quantity: 1 unit

AC 300V Analog Panel Voltmeter 0 to 300V features:
- AC 0-300V analog voltage panel meter
- Type: Analog voltage meter
- Range of scale: AC 0-300V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips features:
- Pyrography type pencil, with 6 replacement tips with different shapes and thicknesses. Ideal for carpentry and joinery
- Can be used on different materials, the most common are wood, leather and rubber, but can also be used with other materials
- Number of nozzles: 6 units
- Power: 30W
- Voltage: 220-240V
- Caution: do not touch the tip of the pyrograph while it is hot. Change the mouthpiece with tweezers or wait for it to cool
- Certifications CE, RoHS, LVD

DC 10V Analog Panel Voltmeter 0 to 10V Rounded features:
- 0-10V DC analog voltage meter
- Type: Analog voltage meter
- Range of scale: DC 0-10V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

Soldering Iron 40W features:
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TUV certifications

DC 25V Analog Panel Voltmeter 0 to 25V Round features:
- 25V 0-25V DC analog voltage panel meter
- Type: Analog voltage meter
- Range of scale: DC 0-25V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

Hot Air Digital Soldering Station ZD-8907 SMD features:
- For welding and desoldering SMD components
- Power: 220V-240V
- Temperature regulation 200°C - 500°C
- Power consumption 320 W (max.)
- Air Flow 22 l/min. (Max.)
- Nozzle diameter 21.5 mm
- Dimensions 58 × 290 mm
- Certifications CE, RoHS, LVD
- Guarantee 12 months

Power supply: 220V-240V Temperature regulation 160 ° C -480 ° C Power consumption 320 W (max.) Flow of Air 24 l / min. (Max.) Dimensions 160x 225x 138mm CE, RoHS, LVD Certifications 12-month warranty

DC 30V Analog Panel Voltmeter 0 to 30V Rounded features:
- 30V 0-30V DC analog voltage meter
- Type: Analog voltage meter
- Range of scale: DC 0-30V
- Accuracy: Class 2.5
- Complete with screws for simple DIY installation

Soldering Gun with Dual Color 30W/70W features:
- Power: 30W, maximum 70W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TÃœV certifications Instructions: When connected, the initial power runs at 30W.
When you press the button, the energy runs around 70W.
When you release the button, the power will slowly descend to 30W again.

DC 10A Analog Panel Ammeter 0 to 10A features:
- DC 10A Ammeter Instrument Analog Amperage meter panel with shunt
- Type: Analogue ammeter
- Range: DC 0-10A
- Accuracy: class 2.5
- Size: 51 × 51 × 46mm
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

Soldering Station 48W + Soldering Set features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 450 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

ESD compatible gloves made of polyester with woven conductive fibres.

DC 20A Analog Panel Ammeter 0 a 20A features:
- DC 20A Analog Ammeter Panel AMP Current Meter 0-20A
- Type: AMP analog meter
- Range of scale: DC 0-20A
- Accuracy: Class 2.5
- Size: 51 × 51 × 46 mm
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:
- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.
- Fusing temperature 183°C/190°C.
- Alloy: Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

DC 30A Analog Panel Ammeter 0-30A features:
- DC 30A Analog Ammeter Panel Current Meter AMP 0-30A
- Type: AMP analog meter
- Range of scale: DC 0-30A
- Accuracy: Class 2.5
- Size: 51x 51x 46 mm
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

ZD-8906 Digital Soldering Station 30W features:
- For general electronics and repairs
- High potency ceramic resistance that provides a fast recovery of temperature
- Soldering iron holder
- Heating element for soldering iron: 30W
- Resistance: Ceramic
- Temperature: 160 °C - 550 °C
- Power: 220-240Vac
- Certifications CE, RoHS, LVD

DC 5A Analog Panel Ammeter 0 to 5A features:
- DC 5A Ammeter Instrument Analog Amperage meter panel with shunt
- Type: Analogue ammeter
- Range: DC 0-5A
- Accuracy: class 2.5
- Size: 82mm fi
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

DC 10A Analog Panel Ammeter 0 to 10A features:
- DC 10A Ammeter Instrument Analog Amperage meter panel with shunt
- Type: Analogue ammeter
- Range: DC 0-10A
- Accuracy: class 2.5
- Size: 82mm fi
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

DC 20A Analog Panel Ammeter 0 to 20A features:
- DC 20A Analog Ammeter Panel AMP Current Meter 0-20A
- Type: AMP analog meter
- Range of scale: DC 0-20A
- Accuracy: Class 2.5
- Size: 82mm fi
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

Tin ideal for application in consumer electronics circuits
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm features:
- 100gr. 0,5mm diameter welding wire. 60% tin and 40% lead
- Melting temperature 183 o C / 190 o C
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

DC 30A Analog Panel Ammeter 0 to 30A features:
- DC 30A Analog Ammeter Panel Current Meter AMP 0-30A
- Type: AMP analog meter
- Range of scale: DC 0-30A
- Accuracy: Class 2.5
- Size: 82mm fi
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g features:
- 50gr. 1mm diameter welding wire. 60% tin and 40% lead.
- Fusing temperature 183°C/190°C.
- Alloy: Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

Ideal for car, motorcycle, does not need a battery.
Voltmeter LED Waterproof Digital Display Red 3,5V 30V 0,56 features:
- Measuring range: from 3.5 VDC to 30 VDC ±% 1
- Operating current: <30mA
- Measuring refresh time: 500ms
- Dimensions: 54mm x24mm x15mm
- Cable length: 85 mm
- Color: black
- Screen: Red LED
- Operating temperature: -10ºC to 65ºC

Tin ideal for application in consumer electronics circuits.
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm features:
- 100gr. 1.2mm diameter welding wire
- 60% tin and 40% lead
- Fusing temperature 183 „ƒ / 190 „ƒ
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets.
The voltage and current are shown successively.
Current and Voltage Meter Tester features:
- Operating range:
       - Voltage 3 - 7,5V
       - Current 0 -3A
- Resolution: 10mV 1mA
- Error: <± 1.5%%
- Dimensions: 5.2 x 2 x 1.5 cm

Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets ...
USB Digital Power Voltmeter Tester Amps features:
- Operating range: voltage 3.5 - 9V
- Current 0 -3A
- Resolution: 10mV 1mA
- Error: <± 1.5%
- Dimensions: 60 x 23 x 19mm

Liquid Flux Alcohol Base TK83 100ml 
Flux liquid alcohol based for electronic welding. Type of flux: rosin
No Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1mm 1.0 features:
- Material: Copper
- Length: 1.5m
- Width: 1.0mm
- Desoldering Braid Solder Remover Wick 1mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

Voltmeter Ammeter 100V 50A Digital DC Red Blue features:
- Supply voltage: 4.5V to 30V
- Voltage measurement range: 0V to 100V (± 1%)
- Min voltage resolution: 0.1V
- Current measurement range: 0A to 50A (± 1%)
- Min current resolution: 0.1A
- Operating current: 5mA to 15mA
- Display: Red LED color (Voltage) and Blue LED color (Intensity)
- Includes reverse polarity protection
- Measurement refresh time: 500ms
- Screen dimensions: 48 x 29 mm
- Recessed hole: 45.5 x 26.5 mm
- Depth: 21 mm
- Cable length: 150 mm
- Operating temperature: - 10ºC to 65ºC
- No battery needed
- Dual panel with voltmeter and digital ammeter Useful links for Arduino />

Dimensions 12 x 2.5 x 1.8 cm

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 1.5mm
- Desoldering Braid Solder Remover Wick 1.5mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

Voltmeter Ammeter 100V 50A Shunt Digital DC Red Blue features:
- Supply voltage: 4.5V to 30V
- Voltage measurement range: 0V to 100V (± 1%)
- Min voltage resolution: 0.1V
- Current measurement range: 0A to 50A (± 1%)
- Min current resolution: 0.1A
- Operating current: 5mA to 15mA.
- Screen: red LED color (Voltage) and blue LED color (Intensity)
- Includes protection against reverse polarity
- Measurement refresh time: 500ms
- Screen dimensions: 48 x 29 mm
- Recessed hole: 45.5 x 26.5 mm
- Depth: 21 mm
- Cable length: 150 mm
- Operating temperature: -10ºC to 65ºC Useful links for Arduino / Raspberry programming and projects with Arduino />

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2mm features:
- Material: Copper
- Length: 1.5m
- Width: 2mm

DC 5A Analog Panel Ammeter features:
- DC 5A Ammeter Instrument Analog Amperage meter panel with shunt
- Type: Analogue ammeter
- Range: DC 0-5A
- Accuracy: Class 2.5
- Size: 51 × 51 × 46mm
- Complete with screws for simple DIY installation
- This meter has a built-in bypass, does not need external derivation

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 2.5mm

Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 features:
- Measuring range: from 3.5 VDC to 30 VDC ±% 1
- Operating current: <30mA
- Measuring refresh time: 500ms
- Dimensions: 54mm x24mm x15mm
- Cable length: 85 mm
- Color: Black
- Display: Blue LED
- Operating temperature: -10ºC to 65ºC

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 3mm features:
- Material: Copper
- Length: 1.5m
- Width: 3mm

Voltmeter LED Waterproof Digital Display DC Green 3.5V 30V DC 0.56 features:
- Measuring range: from 3.5 VDC to 30 VDC ±% 1
- Operating current: <30mA
- Measuring refresh time: 500ms
- Dimensions: 54mm x24mm x15mm
- Cable length: 85 mm
- Color: Black
- Display: Green LED
- Operating temperature: -10ºC to 65ºC

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 0.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 0.5mm

Tin ideal for application in consumer electronics circuits
Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:
- 10 gr. welding wire of 1 mm diameter. 60% tin, 40% lead
- Melting temperature 187/190 C
- Alloy Sn60Pb40
- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required.  - Quantity: 1 unit
- High quality - manufactured in EU

Voltmeter Amperemeter DC Red and Blue 100V 10A features:
- Supply voltage: 4.5V to 30V
- Voltage measurement range: 0V to 100V (± 1%)
- Min voltage resolution: 0.1V
- Current measurement range: 0A to 10A (± 1%)
- Min current resolution: 0.01A
- Operating current: 5mA to 15mA
- Display: Red LED color (Voltage) and Blue LED color (Intensity)
- Includes reverse polarity protection
- Measurement refresh time: 500ms
- Screen dimensions: 48 x 29 mm
- Recessed hole: 45.5 x 26.5 mm
- Depth: 21 mm
- Cable length: 150 mm
- Operating temperature: - 10ºC to 65ºC
- No battery needed
- Dual panel with voltmeter and digital ammeter

Tin ideal for application in consumer electronics circuits
Tin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm features:
- 10 gr. welding wire of 1 mm diameter. 99,3% tin, 0,5-0,9% copper and 0,07% lead
- Melting temperature 227 C
- Alloy Sn99Cu1
- Flux 3% Roma IPC-J-STD-004B, SW32 DIN8511  - RohS2 compliant  - Quantity: 1 unit
- High quality - manufactured in EU

Voltmeter DigitaI Blue 0-200V DC 0.56 features:
- 3-wire recessed LED Voltmeter
- No battery needed
-Measuring range: 0-200 Vdc
- Supply voltage: 4.5-30 Vdc
- Screen: 0.56 € Blue Led
- Color: Black
- Includes reverse polarity protection
- Operating current:

Digital Voltmeter Green 0-200V DC 0.56 features:
- 3-wire recessed LED Voltmeter
- No battery needed
- Measurement range: 0-200 Vdc
- Supply voltage: 4.5-30 Vdc
- Screen: 0.56 € Green Led
- Color: Black
- Includes reverse polarity protection
- Operating current:

Soldering Iron Cleaner with Brass Ball Holder features:
- Brass wire cleaner for solder tips with support
- It allows to remove the welding residues from the tips
- Cleans better and does not cause temperature drops as with sponges
- You do not need extra water to clean the tip
- Easy and effective cleaning at the tip
- Dimensions: diameter 50mm
- Support dimensions: 60x68mm

Digital Voltmeter Red 0-200V DC 0.56 features:
- No battery needed
- Measurement range: 0-200 Vdc
- Supply voltage: 4.5-30 Vdc - Screen: 0.56 € Red Led
- Color: Black
- Includes reverse polarity protection
- Operating current:

Universal Battery Tester AA AAA 1.5V 9V features:
- Type: Household battery tester
- You accept:
* Button batteries
* 1.5 V: AAA, HP16, MN2400, AA R03, HP7, MN1500, UM3 C, HP11, MN1400, SP11, LR14, UM2 D, HP2, MN1300, SP2, R20
* 9 V: PP3, 6F22, MN1604, 006P
* Dimensions: 5.5 x 5.2 cm

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm

3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80 mm
- Length 70 mm
- Long duration tip

Digital Voltmeter Red 0V to 30V DC 0.56 features:
- Measurement range: 0-30 Vdc
- Supply voltage: 4.5-30 Vdc
- Screen: 0.56 € Red Led
- Color: black
- Includes reverse polarity protection
- Operating current:

Long Life Replacement Tip Welder B11 Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80mm
- Length 70 mm
- Long duration tip
- Quantity: 1 unit

Digital Voltmeter Green 0V to 30V DC 0.56 features:
- Measurement range: 0-30 Vdc
- Supply voltage: 3.5-30 Vdc
- Screen: 0.56 € Green Led
- Color: black
- Includes reverse polarity protection
- Operating current:

Long Life Replacement Tip Welder B12 Ø 3.8mm 40W features:
  - Power: 40W
- Rod: ø 3.80mm
- Length: 70 mm
- Long duration tip
- Quantity: 1 unit