Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB Boost converter provides stable performance at 5V output even when operating with two AA batteries:- Input voltage min 2V-output 5V/ ~ 400mA- Input voltage min 3V-output 5V/ ~ 800mA- Input voltage min 3.5V-output 5V/ ~ 1200mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB features:- Input Voltage: 2V - 5.0V DC- Output Voltage: 5.1V + / 0.1V- Max Output Current: 1200mA- LED operation indicator- Protection over short circuit: no- Measures of PCB 26 x 18 Code A0002 Available Price €2.20
DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo Descent module.Use a multimeter to check the output voltage and adjust the potentiometer.Control of voltage and current.DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo features:- Input voltage: 4-38V- Output voltage: 1.25-36V- Current output: adjustable, 4.5A (max 5A)- Output power: 75W maximum- Operating temperature: -40 to + 85 ºC- Operating frequency: 180KHz- Efficiency conversion: up to 96%- Short circuit protection: Yes (limited current 8A)- Protection over temperature: the output switches off automatically- Size: 62mm x 26mm x 14mmPrincipal functions:- Step-down converter with overcurrent protection- Li-Po battery charger, Li-Ion Code A0014 Available Price €3.49
Boost Buck Step Up-Down Automatic Converter Descripción:This is a powerful, efficient step-up (boost) and step-down (buck) switching voltage converter. It will automatically change between boosting and bucking to maintain a stable output voltage, regardless of the input.The output is set with a multi-turn potentiometer.Boost Buck Step Up-Down Automatic Converter features:- IC Chip: LM2577S-ADJ and LM2596S-ADJ - Module Properties: non-isolated Boost Buck constant current, constant voltage module (CC CV) charging module- Scope: High-power constant current LED driver.- Battery charger (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride batteries (battery) charger, solar panels, wind generators. Code A0017 Available Price €9.49
LED Power Supply Transformer DC 12V 5A 60W LED Power Supply Transformer DC 12V 5A 60W features:- Supply voltage: 110/230V AC- Output voltage: 12V DC- Output amperage: 5A- Power at 12V: 60W- Dimensions: 110mm x 78mm x 36mm Code A0053 ✗ Out-of-Stock Price €10.95
Battery holder 1x 18650 3.7V Power cable Characteristic: - Cable 15cm long - Measurements 74x21x 19mm - Weight: 8 gr. (approx.) - Stack length max 67mm Code PP014 Available Price €0.99
4x 18650 3.7V Parallel Lithium Battery 4x 18650 3.7V Parallel Lithium Battery features: - Cable 10cm long - Measures 80x76x 20mm - Stack length max 67mm Code PP017 Available Price €2.89
Boost Adjustable Power Converter LM2587 5A DC 4.5-35V A high-performance step-up regulator Boost Adjustable Power Converter LM2587 5A DC 4.5-35V features: - Input voltage: 3.5 ~ 32v - Output voltage: 4.5 ~ 35v (adjustable) - Output current: 3A, maximum 5A (heatsink heat is required) - Conversion efficiency: up to 90% - Operating frequency: 100KHz - Short circuit protection: current limiting - Operating temperature: industrial grade (- 40 to 85) - PCB dimensions: 52 x 37 mm Code A0019 Available Price €6.99
6V 4.5W DIY Solar Panel 6V 4.5W DIY Solar Panel features: - Mobile DIY System Photovoltaic Charger Cell -Work Voltage: 6V -Power output: 4.5W -Working current: 0-750mA -Product size: 165x165x3 mm Code A0063 ✗ Out-of-Stock Price €12.89
Solar Panel DIY 4V 30mA DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA. Code A0061 Available Price €2.49
DC Step Down Converter 3.3V 2A 3.4-6V DC Step Down Converter 3.3V 2A 3.4-6V features: - Voltage drop module- Input voltage: 3.4-6V- Output voltage: 3.3V- Current output: adjustable, max 2A- Operating temperature: -40 to + 85 ºC- Operating frequency: 1.5MHz- Efficiency conversion: up to 95%- Short circuit protection: Yes (limited current 8A)- Protection over temperature: the output switches off automatically- Size: 12 x 15 mm- Full charge output ripple: Vpp <50 mV- Output accuracy: ± 0.1V- Current IQ without load: 0.2mA- Stop current (EN) <10uA Code A0068 Available Price €3.38
Mobile Charger 5V 3A 3100mA Micro USB 15W Mobile Charger 5V 3A 3100mA Micro USB 15W features: - Raspberry PI Red Power Supply - Charger for Raspberry Pi 2 and Pi 3, B and B + - External 220V a 5V / 3.1A (3100mA) 15W - Plug type: Micro USB - Additional USB A socket - AC-DC adapter - 100-265V AC input, 50-60Hz - Output 5V / 3.1A (3100mA) 15W - Cable length: 130cm - RoHs, CE - High Quality Code RA014 Last items in stock Price €10.99
TP4056 Module Lithium Battery Charger with Protection Micro USB TP4056 Module Lithium Battery Charger with Protection features: - TP4056 Li-Ion Micro USB Charger - Upgraded version of previous TP4056 - Micro USB connection to charge directly from the PC - Ideal for 18650 batteries - Based on the TC4056A regulator - Input Voltage: 4.5V - 5.5V DC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Overvoltage protection 4.2V - Over discharge protection 2.4V - LED indicator: charging blue, charging red - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Overcurrent protection: 3A - Measurements 26 x 19 x 5 mm - Possibility of current change through Rprog Code A0026 Available Price €1.69
Solar panel DIY 6V 1W Solar panel DIY 6V 1W features: - Mobile DIY Solar System Photovoltaic Charger Cell - Working voltage: 6V - Output power: 1W - Working current: 0-200 mA - Product size: 110x60x3 mm Code A0062 Available Price €3.95
Battery Holder R6 LR06 4+4 8x AA 12V Battery Holder R6 LR06 4+4 8x AA 12V features: - Cable 14cm long- Measures 58x 32x 30mm- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7) Code PP009 Available Price €1.89
TP4056 Lithium Battery Charger Module 5V Mini USB TP4056 Lithium Battery Charger Module 5V mini USB features: - Based on TP4056ES regulator - Lipo mini USB Li-Ion charger - Input Voltage: 4.5V - 5.5 VDC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Indicator LED: charging red, charging green - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A - Measurements: 25x19x5 mm - Ideal for 18650 batteries Code A0008 Available Price €0.99
XL6009 DC-DC Step-Up Booster Controller LM2577 - The XL6009 module has a superior performance than the LM2577 module - The regulator-booster of High performance Characteristic: - Based on the XL6009E1 regulator - Input voltage: 3V-32V, - Output voltage: 5-35V (adjustable), - Output current: 2A maximum 3A (heat sink is required) - Conversion efficiency: up to 94% - Rectifier: not synchronous rectification - Short circuit protection: current limitation, since recovery - Operating temperature: industrial grade (-40 ° C - 85 ° C) - Load regulation: ± 0.5% - Voltage regulation: ± 0.5% - Size: 50 x 22 x 15 mm Code A0005 Available Price €2.45
Converter DC USB Step Down 7V-24V to 5V 3A Converter DC USB Step Down 7V-24V to 5V 3A features:- Voltage reduction module with USB connector- DIY mobile power supply, to achieve the 5v output to charge the phone, mp3, mp4, psp, etc. can not charge for the ipad- The USB output converter module has short circuit protection 5A current automatic protection- Based on the monolithic MP2307 controller- Rectification: not synchronous- Input voltage: DC 7v to 24v- Output voltage: DC 5v- Output current: 3A (Little time 4A)- Output connection: USB Type A female connector- Input connection: Terminal with screws- Efficiency of transformation: 96%- Switching frequency: 340KHz- Output ripple: 30mV (max.)- Load regulation: ± 0.5% Code A0016 Available Price €3.99
Breadboard Power Supply Protoboard 830/400 Points MB102 Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. Breadboard Power Supply Protoboard 830/400 Points MB102 features:- Input voltage supports up to 12V- Selectable 3.3V or 5V- USB input or standard DC 2.1 x5.5mm connector- Maximum current 700mA- It fits perfectly on the MB-102 breadboard feeding the two lateral buses- Weight: 15 gr. (approx.) Compatible only with MB-102 type plates Code A0003 Available Price €1.95
Power Supply 24V 15A 360W Power Supply 24V 15A 360W features: -Power supply voltage: 110 / 230V AC -Output voltage: 24V DC -Output amperage: 15A -Power at 24V: 360W -Dimensions: 215mm x 115mm x 50mm Code A0128 Available Regular price €28.95 -€2.00 Price €26.95
Battery holder 2x AA 3V Battery holder 2x AA 3V features: - Cable 15cm long - Measurements 59x 33x 16mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7) Code PP002 Available Price €0.99
Power supply DC 12V 8.3A 100W Power supply DC 12V 8.3A 100W features: - Supply voltage: 110 / 230V AC - Output voltage: 12V DC - Output Amperage: 8.3A - Power at 12V: 100W - Dimensions: 129mm x 99mm x 40mm - With LED Strip Code A0059 Available Price €13.59
Power supply DC 12V 12.5A 150W LED strip Power supply DC 12V 12.5A 150W LED strip features: - Supply voltage: 110 / 230V AC - Output voltage: 12V DC - Output amperage: 12.5A - Power at 12V: 150W - Dimensions: 159mm x 99mm x 43mm - With led strip Code A0080 Available Price €16.49
Power supply DC 24V 5A 120W Power supply DC 24V 5A 120W features: - Supply voltage: 110 / 230V AC - Output voltage: 24V DC - Output amperage: 5A - Power at 24V: 120W - Dimensions: 199mm x 99mm x 43mm - With LED Strip Code A0055 Backorder Price €17.54
Rechargeable Battery Samsung INR18650 2500mAh Li-ion Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features: IMPORTANT: This battery does not have a protection circuit. Use it at your own risk. Do not charge over 4.2V Do not discharge below 3V Do not change polarity Do not heat the battery, or expose it to high temperatures Do not wet or expose to environments of High humidity For long periods of storage it should be stored below 45 ° C After long periods of storage you will probably need to do some charging cycles to increase the capacity again. Quantity: 1 unit Nominal capacity: 2500mAh (0.2C, 2.75V discharge) Minimum capacity: 2450mAh (0.2C, 2.75V discharge) Charging voltage: 4.2 ± 0.05 V Code PP030 ✗ Out-of-Stock Price €6.59
12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell Suitable for a small solar power system, etc. 12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell features: - Working voltage: 12V - Output power: 1.5W - Product size: 115x 85x 3 mm Applications: - Charge cell phones - Home lighting - DIY solar powered toys Code A0070 Available Price €4.89
Adjustable DC Module LM2596 1,25-32V 3A Step Down 3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features: - Based on the LM2596S-ADJ regulator - Rectification: Asynchronous - Output Voltage: 1.25v - 32v DC (adjustable) - Voltage of Input: 3.2v - 35v DC - Max Output Current: 3A (with heat sink) - Ripple at output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2.5% - Operating Temperature: -40ºC to + 85ºC - Measurements 43x 21x 14 mm Code A0004 Available Price €1.99
Converter module AMS1117 Buck fixed output 5V 800mA This module is a voltage regulator that creates an output voltage of 5V with a maximum current of 800mA. The integrated regulator is referenced AMS1117. The module has two two point connectors for quick connection. Converter module AMS1117 Buck fixed output 5V 800mA features: - Based on the regulator AMS1117-5V - Input voltage: 4.5-12VDC - Output voltage: 5VDC (+/- 0.05V) - Max output current: 800mA - Operating temperature: -40C to + 150C - PCB size: 25x12 mm Code A0073 Available Price €1.49
10A DC-DC Converter Adjustable Downstream 8V-40V to 1.25V-36V This power supply delivers an output voltage lower than that of the input and allows power loads up to 10A. It has its heat sink, it is Recommended to use it for loads up to 8A for optimal cooling. Includes its foot protection kit, which greatly facilitates heat dissipation and use. 10A DC-DC Converter Adjustable Downstream 8V-40V to 1.25V-36V features: - Input voltage: DC 8V-40V - Output voltage: DC 1.25V-36V adjustable with potentiometer (can only be used as a reducing module, the input must be higher than 1.25V output) - Output current: 8A (Max 10A for a short time), adjustable with potentiometer. Below 5A it can cool naturally - Output power: Max 150W - Key components: - Electrolytic capacitors 470µF - 50V Code A0074 Available Price €13.49
6V 2W Solar Panel Do-it-yourself Mobile Photovoltaic Charger Cell Suitable for a small solar power system, etc. 6V 2W Solar Panel Do-it-yourself Mobile Photovoltaic Charger Cell features: - Working voltage: 6V - Output power: 2W - Product size: 136x 110x 3 mm Applications: - Charge cell phones - Home lighting - DIY solar powered toys Code A0071 Available Price €5.95
Small Industrial Solar Panel 60x30mm 0.14W 0.5V 200mA Suitable for a small very low voltage solar power system. Can be used as a power source current. Characteristic: - Working voltage: 0.5V - Maximum output current: 200mA - Output power: 0.14W - Product size: 60x 30 mm Code A0072 Available Price €1.99
Solar charger USB DC mobile power supply This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker. Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features: - Operating temperature: -40 ° C - 85 ° C - Input voltage: 3.6 - 20 VDC - Output voltage: 5 VDC - Output current: 2A - Conversion efficiency: 95% - Size: 30x25x117 mm Code A0075 ✗ Out-of-Stock Price €9.49
XL4015 DC-DC 5A Digital Step-down LED Converter with Voltmeter, Ammeter and USB Output This Step-down voltage converter includes 5 functions in one module. It can be used as a voltmeter, ammeter and measurements can be recovered through its USB port. The output voltage and voltage can be adjusted thanks to two potentiometers present in the module. It has an efficiency Very high, it has a display screen for voltage, current and two buttons to configure what you want to see. Characteristic: - Voltage of input: 5.5 - 36 V - Output voltage: 1.25-32 V continuously adjustable - Output current: 4.5 A (Max 5A for a short time) adjustable with potentiometer, - Power output: 75 W maximum (recommended to use 50 W, large pressure difference, please reduce power) - Operating temperature: -40 ° C - + 150 ° C Code A0077 Available Regular price €7.89 -€1.00 Price €6.89
Micro USB Interface Power Supply DC 7-12 VDC This module is a 2-channel DC 7-12 VDC power supply for MB102 breadboards. Each channel has its switch for configure the output voltage to 3.3V or 5V. Its 3x2 male connectors allow it to be connected to the breadboard in a very simple way without soldering. Micro USB Interface Power Supply DC 7-12 VDC features: - Operating voltage: DC 7-12 V - Power display LED - 1 Jack Female connector 2.1 mm to supply - 1 AMS1117 3.3V regulator - 1 AMS1117 5V regulator - 4 3x2 connectors - 1 5V micro USB female outlet - Size: 5.5x3.5x1.5 cm Code A0078 Available Regular price €9.50 -€4.00 Price €5.50
Battery Varta Industrial AA - 4006 LR06 Mignon 1,5V- pack 4unds Battery Varta Industrial AA - 4006 LR06 Mignon 1,5V- pack 4unds features: - 1.5V Varta Industrial LR06 Battery - High quality, made in Germany - Quantity: 4 units Code PP029 Available Price €0.59
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 1A- Plug: EU plug- Cable length: 38cm- The battery are not included Code A0081 Available Price €4.59
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 650mA- Plug: EU plug- The battery are not included Code A0082 Available Price €3.50
Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector features: - Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 5V- Output current: 2.5A- DC connector: USB A, without cable- Indicator of operation: LED diode Code A0083 Available Price €4.99
Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector features: - Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 5V- Output current: 2.5A- DC connector: micro USB- Cable length 85cm Code A0084 Available Price €4.99
Fuente de Alimentación DC 24V 5A 120W - Tensión de alimentación: 110/230V AC- Tensión de salida: 24V DC- Amperaje de salida: 5A- Potencia a 24V: 120W- Dimensiones: 160mm x 99mm x 43mm Code A0086 ✗ Out-of-Stock Price €14.00
Power Supply DC 5V 6A 30W Power Supply DC 5V 6A 30W features: - Supply voltage: 110 / 230V AC - Output voltage: 5V DC - Output amperage: 6A - Power at 5V: 30W - Dimensions: 110mm x 78mm x 36mm Code A0085 Available Regular price €12.90 -€2.00 Price €10.90
Rechargeable Battery Sanyo NCR18650GA 3450mAh Li-ion 3,6V 10A Characteristic: - Lithium Battery WITHOUT Protection - Nominal capacity: 3450mAh (0.2C, discharge of 2.5V) - Minimum capacity: 3350mAh (0.2C, 2.5V discharge) - Charging voltage: 4.2 ± 0.05 V - Nominal voltage: 3.6V - Charging method: DC-CV (constant voltage with current limited) - Charging current: standard charge: 1675mA, - Max. Discharge current: 10A (ambient temperature 25 °) - Charging time: standard charge: 4 hours, - Discharge cut-off voltage: 2.5V - Cell weight: 47g maximum - Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum Code PP031 ✗ Out-of-Stock Price €9.50
3V CR1220 Vinnic button lithium battery 3V CR1220 button lithium battery features: - 3V battery - Diameter: 12.5mm - Voltage: 3V - Capacity: 45mAh - Quantity: 1 unit Code PP032 Available Regular price €1.19 -€0.20 Price €0.99
Lithium Battery Holder Button 3V CR1220 THT PCB Lithium Battery Holder Button 3V CR1220 THT PCB features: - Material: - Contact: Phosphor Bronze- Electric: - Type: THT - Contact Resistance: 30 Milliohms Max - Insulation Resistance: 1000 Mega Ohms Min - Dielectric Voltage: 500V AC one sec level - Operating Temperature: -25 „ƒ - 85 „ƒ- Suitable for Computer Memory, Power transfer, Communications Power System, PC Application, Armamentarium, Motherboard Code PP033 Available Regular price €1.19 -€0.20 Price €0.99
Lithium Battery Holder Button 3V CR1220 SMD PCB Lithium Battery Holder Button 3V CR1220 SMD PCB features: - Diameter: 15 mm- Thickness: 4 mm- Type: SMD- Use it for CR1220 battery- Suitable for Computer Memory, Power transfer, Communications Power System, PC Application, Armamentarium, Motherboard Code PP034 Available Price €0.89
Solar panel DIY 6V 0.6W Solar panel DIY 6V 0.6W features: - Mobile DIY Solar System Photovoltaic Charger Cell - Working voltage: 6V - Output power: 0.6W - Working current: 0-200 mA - Product size: 90x60x3 mm - Includes soldered power cables. Code A0091 Available Price €2.89
5V supply module with 2A step up output DM13 Power supply module step up with fixed output 5 VDC accepting a maximum current of 2A. Works with frequency signals up to 1.2 MHz. Characteristic: - Input voltage range: 2 - 5 VDC, - Fixed output voltage: 5 VDC, - Output accuracy: ± 0.1 V, - Maximum output current: 2A, - Ripple at full load: Vpp & lt; 70mV, - Operating temperatures: -40ºC - + 85ºC, - PCB size: 17x13mm. Code A0092 Available Price €5.49
12 V supply module with 2A step-up output on/off DM13 Overhead power supply module with fixed 12 VDC output accepting a maximum current of 2A. Works with frequency signals up to 1.2 MHz. Characteristic: - Input voltage range: 2 - 12 VDC, - Fixed output voltage: 12 VDC, - Output accuracy: ± 0.1 V, - Maximum output current: 2A, - Ripple at full load: Vpp & lt; 70mV, - Operating temperatures: -40ºC - + 85ºC, - PCB size: 17x13mm. Code A0093 Available Price €3.90
9V power module with 400mA step up output On/Off DM06 Step-up power supply module with fixed 9 VDC output accepting a maximum current of 400mA. Controlling the logic level of the signal sent on the EN pin, a module can be turned on / off. Works with frequency signals up to 1.5 MHz. Characteristic: - Input voltage range: 2.5 - 7 VDC, - Fixed output voltage: 9 VDC, - On / off mode pin EN: signal EN allowing this function to be performed, - Output accuracy: ± 0.1 V, - Output current: 150 - 400 mA, - No-load current: 0.2 mA, - Ripple at full load: Vpp & lt; 70mV, - DC-DC conversion quality: 89% - Operating temperatures: -40ºC - + 85ºC, - PCB size: 19x15 mm. Code A0094 Available Price €3.80
everActive R6 / AA 2000 mAh Ni-MH 1.2V rechargeable batteries 4x everActive R6 / AA 2000 mAh Ni-MH 1.2V rechargeable batteries features: - Batteries in Blister - Nominal capacity: 2000mAh - Minimum capacity: 1900mAh - Nominal voltage: 1.2V - Cell dimension: Height: 50.50 mm max - Diameter: 14.50 mm max Code PP035 Last items in stock Price €2.19
Solar panel controller 3.7V - 2A Lithium battery charge, discharge with light control 3.7V - 2A solar panel controller, charging, discharging lithium battery with lighting control with output from 2.5 V to 4.2 V. Integrate PWM suspension float. Characteristic: - Charging current: 2A - Compatible battery type: Li-ion - Type: 3.7V single cell lithium battery solar controller - PWM suspension float with integrated maintenance charge. - Avoid overcharging the lithium battery. - Battery type included: None - Charging voltage output limit: 4.2V - Low voltage drip charging of the battery: 2.5V - Over discharge voltage: 2.8V Order of use: 1 ) LED lights connected to "+ OUT", correspond to positive and negative. Code A0095 ✗ Out-of-Stock Price €10.89