Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender Extruder MK8 Bowden for Creality 3D Ender 3, CR-7, CR-8, CR-10, CR-10S, CR-10 S4 y CR-10 S5. Includes: MK8 extruder complete push system. Square part dimensions: 42x42mm. Part dimensions - handle L: 56x28mm Code I0183 Last items in stock Price €14.95
40x Male to male cables 10cm 40x Male to male cables 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont male connectors on both ends - Compatible with 2.54mm female connectors - High quality and good working condition - Easy to install and use Code K0107 Last items in stock Price €1.99
Blue cleaning sponge for soldering iron tip with pre-cut circle at the center Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip with pre-cut circle at the center features: - Circle diameter 17mm precut to the center of the sponge,- Size: 55x55mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0151 Available Price €0.80
Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development Mini ESP8266 ESP12E CH340 WiFi Development NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu it is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC It works as a standard WiFi 802.11 b / g / n 2.4 GHz Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development features: - Compatible with Arduino, programming with the Arduino IDE - Power supply voltage: 5V - LOGICAL LEVELS: 3.3V - 11 input / output pins - 1 ADC (input: 0-3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and power management units Integrated Code W0061 Available Price €3.49
DHT22/AM2302 Temperature Humidity Sensor The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. This sensor, unlike DHT11, is capable of measuring negative temperature values and measures tenths of a degree. DHT22/AM2302 Temperature Humidity Sensor features: - Voltage Operating: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy - Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy - Maximum sampling rate: 2 seconds Code S0018 Available Price €3.95
DC Gear Motor 6V 1:48 for Arduino DC Gear Motor 6V 148 Arduino features:- Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Reduction: 1:48 Code R0008 Available Regular price €1.90 -€0.41 Price €1.49
140x Jumper Wire Kit 140x Jumper Wire Kit features: -Quantity: 140 pieces of different lengths and colors in small box compartments-Box measures: 170x55x15mm Code K0011 Available Price €2.90
Boost Buck Step Up-Down Automatic Converter Descripción:This is a powerful, efficient step-up (boost) and step-down (buck) switching voltage converter. It will automatically change between boosting and bucking to maintain a stable output voltage, regardless of the input.The output is set with a multi-turn potentiometer.Boost Buck Step Up-Down Automatic Converter features:- IC Chip: LM2577S-ADJ and LM2596S-ADJ - Module Properties: non-isolated Boost Buck constant current, constant voltage module (CC CV) charging module- Scope: High-power constant current LED driver.- Battery charger (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride batteries (battery) charger, solar panels, wind generators. Code A0017 Available Price €9.49
Solar Panel DIY 4V 30mA DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA. Code A0061 Available Price €2.49
6V 4.5W DIY Solar Panel 6V 4.5W DIY Solar Panel features: - Mobile DIY System Photovoltaic Charger Cell -Work Voltage: 6V -Power output: 4.5W -Working current: 0-750mA -Product size: 165x165x3 mm Code A0063 ✗ Out-of-Stock Price €12.89
Solar panel controller 3.7V - 2A Lithium battery charge, discharge with light control 3.7V - 2A solar panel controller, charging, discharging lithium battery with lighting control with output from 2.5 V to 4.2 V. Integrate PWM suspension float. Characteristic: - Charging current: 2A - Compatible battery type: Li-ion - Type: 3.7V single cell lithium battery solar controller - PWM suspension float with integrated maintenance charge. - Avoid overcharging the lithium battery. - Battery type included: None - Charging voltage output limit: 4.2V - Low voltage drip charging of the battery: 2.5V - Over discharge voltage: 2.8V Order of use: 1 ) LED lights connected to "+ OUT", correspond to positive and negative. Code A0095 ✗ Out-of-Stock Price €10.89
Small Industrial Solar Panel 60x30mm 0.14W 0.5V 200mA Suitable for a small very low voltage solar power system. Can be used as a power source current. Characteristic: - Working voltage: 0.5V - Maximum output current: 200mA - Output power: 0.14W - Product size: 60x 30 mm Code A0072 Available Price €1.99
Solar charger USB DC mobile power supply This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker. Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features: - Operating temperature: -40 ° C - 85 ° C - Input voltage: 3.6 - 20 VDC - Output voltage: 5 VDC - Output current: 2A - Conversion efficiency: 95% - Size: 30x25x117 mm Code A0075 ✗ Out-of-Stock Price €9.49
Solar Power Manager 5V The solar power management module with the CN3065 chip is ideal for IoT (Internet of Things) projects with renewable energy. Compared to the previous version of the module, improvements have been made to the energy management of the connected battery. Code DF025 Last items in stock Regular price €17.50 -€4.00 Price €13.50
12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell Suitable for a small solar power system, etc. 12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell features: - Working voltage: 12V - Output power: 1.5W - Product size: 115x 85x 3 mm Applications: - Charge cell phones - Home lighting - DIY solar powered toys Code A0070 Available Price €4.89
Solar panel DIY 6V 1W Solar panel DIY 6V 1W features: - Mobile DIY Solar System Photovoltaic Charger Cell - Working voltage: 6V - Output power: 1W - Working current: 0-200 mA - Product size: 110x60x3 mm Code A0062 Available Price €3.95
Solar Power Manager Supports 3x 18650 Batteries Solar Power Manager (C), Supports 3x 18650 Batteries, Multi Protection Circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output. Code WV006 Available Price €31.95
Solar Panel 6V 5W Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame. Code WV001 Available Price €19.95
Solar Panel DIY 4V 30mA DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA. Code A0061 Available Price €2.49
6V 4.5W DIY Solar Panel 6V 4.5W DIY Solar Panel features: - Mobile DIY System Photovoltaic Charger Cell -Work Voltage: 6V -Power output: 4.5W -Working current: 0-750mA -Product size: 165x165x3 mm Code A0063 ✗ Out-of-Stock Price €12.89
Solar panel controller 3.7V - 2A Lithium battery charge, discharge with light control 3.7V - 2A solar panel controller, charging, discharging lithium battery with lighting control with output from 2.5 V to 4.2 V. Integrate PWM suspension float. Characteristic: - Charging current: 2A - Compatible battery type: Li-ion - Type: 3.7V single cell lithium battery solar controller - PWM suspension float with integrated maintenance charge. - Avoid overcharging the lithium battery. - Battery type included: None - Charging voltage output limit: 4.2V - Low voltage drip charging of the battery: 2.5V - Over discharge voltage: 2.8V Order of use: 1 ) LED lights connected to "+ OUT", correspond to positive and negative. Code A0095 ✗ Out-of-Stock Price €10.89
Small Industrial Solar Panel 60x30mm 0.14W 0.5V 200mA Suitable for a small very low voltage solar power system. Can be used as a power source current. Characteristic: - Working voltage: 0.5V - Maximum output current: 200mA - Output power: 0.14W - Product size: 60x 30 mm Code A0072 Available Price €1.99
Solar charger USB DC mobile power supply This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker. Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features: - Operating temperature: -40 ° C - 85 ° C - Input voltage: 3.6 - 20 VDC - Output voltage: 5 VDC - Output current: 2A - Conversion efficiency: 95% - Size: 30x25x117 mm Code A0075 ✗ Out-of-Stock Price €9.49
Solar Power Manager 5V The solar power management module with the CN3065 chip is ideal for IoT (Internet of Things) projects with renewable energy. Compared to the previous version of the module, improvements have been made to the energy management of the connected battery. Code DF025 Last items in stock Regular price €17.50 -€4.00 Price €13.50
12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell Suitable for a small solar power system, etc. 12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell features: - Working voltage: 12V - Output power: 1.5W - Product size: 115x 85x 3 mm Applications: - Charge cell phones - Home lighting - DIY solar powered toys Code A0070 Available Price €4.89
Solar panel DIY 6V 1W Solar panel DIY 6V 1W features: - Mobile DIY Solar System Photovoltaic Charger Cell - Working voltage: 6V - Output power: 1W - Working current: 0-200 mA - Product size: 110x60x3 mm Code A0062 Available Price €3.95
Solar Power Manager Supports 3x 18650 Batteries Solar Power Manager (C), Supports 3x 18650 Batteries, Multi Protection Circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output. Code WV006 Available Price €31.95
Solar Panel 6V 5W Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame. Code WV001 Available Price €19.95