Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender
  • Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender
  • Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender
  • Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender
  • Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender
  • Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender
  • Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender

Extruder Kit MK8 Bowden Aluminium 1.75mm 3D Printer Creality Ender

I0183

Extruder MK8 Bowden for Creality 3D Ender 3, CR-7, CR-8, CR-10, CR-10S, CR-10 S4 y CR-10 S5. Includes: MK8 extruder complete push system. Square part dimensions: 42x42mm. Part dimensions - handle L: 56x28mm

Creality
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Extruder Kit MK8 Aluminium 1.75mm 3D Printer Creality Ender:

Full metal aluminum alloy

Used for 1.75mm filament

DIY Aluminum Block, You need to assemble it on your own

Customers who bought this product also bought

Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg

Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg features:
A compound for etching of printed circuit boards and pickling of copper. An ideal alternative to ferric chloride. It is readily soluble and does not crystallize from the solution. It etches evenly, ensures the sharpness of contours and minimizes undercutting. Usage: Dissolve the preparation in 0.5 l of water at a temperature of 50°C. Perform etching at 40°C (max. 50°C). Bath movement ensures quicker etching. The etching solution must not be stored in hermetically sealed containers due to the risk of developing overpressure and cracks.

Q0027

Price €10.32

Fan 12V 2x Cables 3D Reprap Printer

Fan 12V 2x Cables 3D Reprap Printer features:
- For Prusa RepRap 3D Printer
- Voltage: 12V
- Consumption: 90mA - Speed: 7000rpm ± 10%
- Noise level: 25dB ± 10%
- Screw diameter: 3.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 28cm
- Dimensions: 30mm x 30mm x 10mm

I0045

Price €1.31

Blue 3D-Pen for ABS/PLA Filaments

- This 3D pen is suitable for ABS or PLA filaments of 1,75m
- Includes an LCD screen that allows you to read the temperature, speed and filament control
- It also comes with button controls to control the extrusion speed
- You can use this powerful 3D pen to draw, draw or trace objects on paper Blue 3D-Pen for ABS/PLA Filaments features:
- Input voltage: 12V
- Current consumption: 2A
- Diameter of the nozzle: 0.7mm
- Heating temperature: 160-230 degrees adjustable
- Ballpoint pen color: blue
- Filaments of random colors
- Includes PLA filament and power 100-240 VAC / 50 Hz - 12VDC / 2A
- Recommended for adults and children 8 years and older

I0155

Regular price €19.83 -€2.00 Price €17.83

Power Supply Transformer 220V AC/DC 2A 12V

Power Supply Transformer 220V AC/DC 2A 12V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 12V
- Output current: 2A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

A0015

Price €3.96

Arduino compatible Nano V3.0 CH340 board

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0006

Price €4.55

Thermal conductive paste HP 340°C 100g

The transfer of heat between the electronic components and the radiator is facilitated.
It is necessary for the correct operation of any type of temperature sensors.
It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features:
- It has a very wide range of working temperatures: -30 °C ~ 300 °C
- Maximum momentary working temperature 340 °C
- Thermal conductivity> 1.5 W / mK

Q0050

Price €9.08

16x2 1602 LCD display Blue IIC/I2C

LCD display consists of a 16-character, 2-rows.
The display is compatible with the HD44780 controller
Ideal for projects with Arduino
You can use it with PIC, AVR, STM32 and many more controllers.

P0010

Price €2.88

Cable chain 15x20 1m for CNC 3D printer

Cable chain 15x20 1m for CNC 3D printer features:
- Suitable for movements where cable displacement or twisting is needed, where cable protection is needed - Easy for installation And maintenance; Low noise, high speed wear resistant movement - The cable structure has been widely used in CNC machine tools, electronic equipment, fire fighting machinery and equipment, stone machinery, machinery glass, doors and windows of machines, injection molding machines, robots, overweight transport equipment, automated warehouses. - Internal widths 15x20mm
- External measurement 20x28mm
- Material: reinforced series polyamide
- Length: 1m
- Quantity: 1 unit

I0139

Price €9.88
€12.36

12,36 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €12.36

Order until 4pm we will send today
30 days return