Filter By


Filter By

Categories

Categories

Availability

Availability

Brand

Brand

Price

Price

  • €0.00 - €676.00

Color

Color

Chip

Chip

Interfaces

Interfaces

Voltages

Voltages

Dimensions

Dimensions

Capacidad

Capacidad

Clase

Clase

Longitud de cable

Longitud de cable

Resolución

Resolución

Tipo

Tipo

Forma

Forma

Tolerancia

Tolerancia

Potencia

Potencia

Capacidad

Capacidad

Filas de carácteres

Filas de carácteres

Firmware

Firmware

Módulo ESP

Módulo ESP

Carga máxima

Carga máxima

Tipo de conversión

Tipo de conversión

Número de canales

Número de canales

Número de digitos

Número de digitos

Número de segmentos

Número de segmentos

RPM

RPM

Consumo de energía

Consumo de energía

Pines

Pines

Tensión inversa máxima

Tensión inversa máxima

Tensión delantera

Tensión delantera

Corriente de sobretensión máxima

Corriente de sobretensión máxima

Corriente inversa

Corriente inversa

Corriente If

Corriente If

Voltaje de entrada

Voltaje de entrada

Voltaje de salida

Voltaje de salida

Empaquetado

Empaquetado

Resistencia [Ohm]

Resistencia [Ohm]

Conector

Conector

Components and sensors

We offer a variety of electronic components and sensors that can satisfy all types of users from hobbyists to professionals interested in home automation, robotics and electronics in general. Check out our offer!

Components and sensors
Showing 41-80 of 1163 item(s)

ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

W0014

Price €4.95

CO₂ Humidity and Temperature Sensor - SCD40 (Qwiic)

This SparkFun CO2, humidity and temperature sensor incorporates Sensirion's new generation of SCD40 photoacoustic CO2 sensors for highly accurate environmental readings. The sensor is capable of detecting concentrations from 0 to 40000 ppm with high precision above 400-2000 ppm ±(50 ppm+5%). The SCD40 has an integrated CMos® temperature and humidity sensor for greater precision.

SP097

Price €74.95

Module TCRT5000 Infrared Sensor IR Tracker Line Obstacle

The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision.
The ideal obstacle detection detector for the installation of smart robots.
TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object.
The working wavelength is 950nm.
The transmitter is infrared LED and the phototransistor receiver.
By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected).
The sensor allows the detection of an object at a distance of up to 12 mm.

S0025

Price €1.85

Red Laser Module 650nm 5mW Head Point Adjustable Focal Length

Red Laser Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Laser type: point
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

M0042

Regular price €3.49 -€0.50 Price €2.99

Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length

Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Type of laser: cross
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

M0041

Price €3.95

5x Push Switch Button B3F Omron Red Key 12mm

5x Push Switch Button B3F Omron Red Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

K0073

Price €0.20

Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC

Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC features:
- Series: low power AVR®
- Core Processor: AVR
- Package / Case: 8-DIP
- Core Size: 8-Bit
- Speed: 20MHz
- Connectivity: SPI
- Number of I / O: 6
- Program MemorySize: 8KB
- Program MemoryType: FLASH
- EEPROM Size: 512B
- Voltage - Supply (Vcc / Vdd): 2.7V ~ 5.5 V
- Data Converters: 10bit A / D, 4 chanels
- Oscillator Type: External
- Operating Temperature: -40 ° C ~ 85 ° C
- RoHS: Yes
- Quantity: 1 unit

T0009

Price €3.95

DS18B20 Submersible Probe Sensor Temperature

Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.
DS18B20 Submersible Probe Sensor Temperature features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Red Vcc
      - Yellow digital output
- Inocidable steel
- Cable length: 1m

S0019

Price €2.39

TUYA IoT Interface for controlling Arduino over WiFi

TUYA IoT interface module - you will be able to control your projects IoT Internet of Things interface of your Arduino. Tuya interface that allows you to control outputs of the Arduino module via WiFi network using apps for Android and iOS mobile devices. The device communicates with Arduino via UART interface, powered by 5V.

WT017

Price €18.90

5x Push Switch Button B3F Omron Blue Key 12mm

5x Push Switch Button B3F Omron Blue Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

K0074

Price €0.21

Silicone Case for HuskyLens

When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board.

Note: This product does not include the HuskyLens board.

DF014

Price €6.99

SparkFun IoT RedBoard - ESP32 Development Board

SparkFun IoT RedBoard development board compatible with Arduino. It incorporates an ESP32 chip with a 32-bit dual-core Xtensa LX6 microprocessor with a clock frequency of up to 240 MHz. It enables WiFi and Bluetooth wireless communication, making it versatile for Smart Home and IoT projects.

SP048

Price €45.49

Gravity: Analog pH Sensor/Meter Kit

DFRobot Gravity (SEN0161): The analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity.

DF024

Price €45.90

40x Female-Female Cable 10cm

40x Female-Female Cable 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Dupont female connectors on both ends
- Compatible with 2.54mm male connectors
- High quality and good working conditions
- Easy to install and use

K1005

Price €1.99

Sensor Module Moisture Earth Water Soil

The module has two outputs: analog A0 and digital D0
Digital output D0 - signal 0 appears or 1 depending on the threshold setting
The threshold is set with the potentiometer
The sensor can be used for example:
Automatic watering for potted plants
With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants
Characteristic:
Operation: 3.3V -5V
- Sensitivity adjustable by potentiometer
- Dual output mode: analog and digital
- Red LED - power indicator
- Green LED - indicator digital switching output
- PCB measurements: 3 x 1.5 cm
- Probe measurements: 6 x 3 cm

S0021

Price €1.95

Shelly 1

Shelly 1 is a universal smarthome relay enabled to work with all the key smart home systems, including Google Home and Amazon Alexa, as well as an original Shelly solution Shelly Cloud

WH001

Regular price €15.95 -€1.50 Price €14.45

40x Male to male cables 10cm

40x Male to male cables 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Dupont male connectors on both ends
- Compatible with 2.54mm female connectors
- High quality and good working condition
- Easy to install and use

K0107

Price €1.99

40x Female Male 10cm

40x Female Male 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Compatible with 2.54mm male connectors
- High quality and good working conditions
- Easy to install and use

K0106

Price €1.99

NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz

NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz features:
- The NRF24L01 + module is powered with 3.3V
- This adapter module includes a 3.3V voltage regulator
- You can connect the NRF24L01 module on it at 5V voltage
- Dimensions of PCB: 25x 18mm
- Quantity: Adapter 1 unit

W0023

Price €1.49

Red Laser Line Module Generator 650nm 10mW

Red Laser Line Module Generator 650nm 10mW features:
- Module Focus Adjustable Laser Head 3V
- Type: Red laser diode
- Type of laser: Line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 10mW
- Operating voltage: 3V-4V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

M0049

Price €6.78

Serial Enabled 16x2 LCD - White on Black 5V

It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328.

SP035

Regular price €36.99 -€10.00 Price €26.99

Support for HC-SR04 Ultrasonic Sensor

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

S0005

Regular price €1.45 -€0.50 Price €0.95

Active filters