Robotics

DIY Mobile Phone Kit - This  stylish little educational device is an open source mobile phone that you can build yourself. It is compatible with all mobile networks, and its purpose is to motivate people to explore, learn and create something new in a fun and interesting way. Age:+11  

This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos.
It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity.
PCA9685 digital servo motor controller 16 channel PWM features:

- Supply voltage: 3-5 VDC,
- Maximum motor voltage: 6 VDC,
- Number of channels: 16,
- Resolution per channel: 12 bits,
- Interface: I2C,
- Working frequencies: 40-1000 Hz,
- PCB size: 62.3x25.3mm .

the robot car motor holder and assembly accessories

Driver DRV8833 can control up to two DC motors or one stepper motor with a constant current of 1.5 A (peak 4A ). The motors are controlled, independently by means of PWM signals the direction of rotation of the motors can be controlled, neutral or stop with a frequency of up to 100 kHz. Two input signals (IN1 and IN2) can be used to control one motor (connected to OUT1 and OUT2) and the other two input signals (IN3 and IN4) to control the second motor (connected to OUT3 and OUT4). NOTE: This DRV8833 dual-bridge motor controller is the replacement for the TB6612FNG dual-channel motor controller. The pins come unsoldered. If the motor draws currents above 0.6A, the use of a heat sink may be required. DRV8833 Controller DC Motor PAP features:

The Ardumoto Shield was created based on the L298 H-bridge as a two-motor controller for Arduino. It was designed to be able to drive two DC motors up to 2A per channel. Together with its Arduino, it will provide the perfect platform to control RC vehicles, or small autonomous robots. Its use has been made easier, LEDs with control signal have been added and the possibilities for advanced users have been increased.

Servo with Rotation 180 Servo Motor Type S3003 features:
- Model Aircraft Futaba Arduino Robotics
- Operating Voltage: 4.8V to 6V
- Max Torque: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V)
- Max radius: 180º
- Temperature range: -20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacturing

Servo Extension Lead Wire Cable 50cm JR Futaba features:
- Cable length: 50cm

Router TB6560 1 Axis 3A Stepper Motor Driver Board features:
- Minimum operating voltage: 10 V
- Maximum operating voltage: 35 V (24V recommended)
- Maximum current: ± 3 A
- Stepper motor · two phases · four phases
- Resolution of microsteps: full, 1/2, 1/8, and 1/16
- PCB measurements: 75x50 mm
- CNC Router 1 Axis Controller Stepper motor controllers TB6560 3A driver board
- Operating voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply
- 6N137 high speed optical coupling guarantees high speed without losing steps
- Use of TB6560AHQ chip with low voltage shutdown, overheat stop and overcurrent
- Protection circuit to ensure optimal performance
- Maximum nominal output: 3 A, peak 3.5A

Servo Extension Lead Wire Cable 300mm JR Futaba features:
- Cable length: 300mm

Servo Extension Lead Wire Cable 200mm JR Futaba features:
- Cable length: 200mm

Servo Extension Lead Wire Cable 150mm JR Futaba features:
- Cable length: 150mm

Servo Motor Type S3003 Aeromodelling features:
- Operating voltage: 4.8 V to 6 V
- Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V)
- Max radius: 180 ° (90º in each direction)
- Temperature range: - 20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR - Chinese Manufacture

Servos Tester features:
- 3-Channel Tester
- For Electronica Arduino

Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV features:
- Platform for Arduino Robotics Modeling, works with servo 9g SG90
- Servos not included

High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features:
- Operating voltage: 4.8 V to 7.2 V
- Consumption: 100mA
- Torque max.: 12kg / cm (6V)
- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)
- Max. Radio: 180ºC
- Temperature range: 0-55 degrees
- Weight: 55 g
- Cable length: 29cm
- Dimensions: 54 x38x 20 mm
- Servo connector: JR (JR and Futaba adaptable)

Platform camera + 2 SG90 Servo Motor 9g Arduino Kit features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Force: 1.2kg / 42.3oz (4.8V), 1.6kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 Degree C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm Contents: - Servo 9g - 2 units
- Platform for camera - 1 unit

5x Hexagonal Separator M3 10mm Male-Female Brass features:
-Metric thread M3
-Male-Female Separator 10mm
-Quantity: 5 units

Geared Motor with Encoder (6V 148 L Shape) features:
- Voltage: 3 to 6V DC
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Reduction: 1:48

Geared Motor with Encoder 6V 1120 Arduino Smart Car Robot features:
- Voltage: 3 to 6Vdc
- Speed without load: 200 RPM to 6Vdc
- No-load current: 110mA at 3Vdc - 250mA at 6Vdc
- Reductive: 1: 120

The module for DIY Arduino hobby
Motor driver L9110 for Arduino, Smart Car, Robotics
Small magnet electric motor for direct current (DC) L9110 Fan Motor Propeller Module 5V features:
- Operating voltage: 5V
- PCB dimension: 3.5 x 2.6cm
- Double red propeller
- Blade length 75mm
- Weight: 6 g
- Quantity:
  1x DC motor
  1x double helix

White plastic wheel with silver tone metal support.
It allows a 360° rotation, provides a good resistance to rolling, wheel silently and without problems. Wheels 30mm PP 360° Rotation for Cylindrical Use features:
- Main material: Polypropylene (PP), steel
- Main color: White, silver tone
- Total size: Total height: 45mm / 1.8 "
- Wheel size: 30 x 13mm / 1.2 "x 0.5" (P * A)
- Hole diameter for mounting: 4mm / 0.16 "
- Space between holes: 28 x 22mm / 1.1 "x 0.9" (L * P)
- Size of the top plate: 38 x 32mm / 1.5 "x 1.3" (L * P)

The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice.

The 28BYJ-48 has everything you need to start using stepper motors in your project. A stepper motor converts digital impulses into small movement steps. in one direction Characteristic: - Motor model: 28BYJ-48
- Motor phases: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per lap: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm
- Operating temperature: -45ºC to + 125ºC
- Motor cable length: 19cm
- Motor block diameter: 28mm
- Motor dimensions: 42mm x 32mm x 30mm

Gear Reducer Motor 6V DC 200RPM for Smart Car features:
- Voltage: 3 to 6V DC
- Speed without load: 200 RPM to 6V DC
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles
- Wiring of the 6V DC 200 RPM motor with the L298N double bridge H controller module

Free metal wheel with white plastic support.
It allows a 360 ° rotation, wheel silently and without problems. Free metal wheel 360° with plastic support for robotics features:
- Main material: Polypropylene (PP), Steel.
- Main color: White, silver tone. - Dimensions of support: 50x24mm. - Ball diameter: 15.80mm.  

Tower Pro Micro Servo 9g SG90 360 degree features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

Metal disc diameter 25mm with 4 mounting holes for 25T RC MG996R servos
25T metal disc for MG996R servomotors + 4 screws features:

- Material: Aluminum
- Gear teeth: 25T
- 4x M3 mounting holes rotated
- Diameter disc: 25mm
- Includes: 4 fixing screws.

9g digital servo new version of SG90.
POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque.
It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features:
Weight: 9g
Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v)
Gear type: POM with carbon fiber
Operating speed: 0.1sec /60degree (4.8v)
Temperature range: 0„ƒ_ 55„ƒ
Dead band width:1us
servo wire length: 25 cm
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm

For Arduino, Smart Car, Robotics.
Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC with cable conector male features:
- Operating voltage: 1.5V to 6V - Cable 16cm with male connector - DC current: 350mA - Torque max.: 15g / cm
- Max speed: 12000rpm
- Weight: 16.5 g

The 28BYJ-48 has everything you need to start using stepper motors in your project
A stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller card
Can control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mA
Equipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features:
- Engine model: 28BYJ-48
- Phases engine: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per round: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm

Characteristic:
- Motor passes 1.8º (200 steps per turn)
- Capable of loading 1.22 kg / cm

It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 4.28 kg/cm. It comes with a 1m cable. We have the best stepper motors at the best prices! 

Heat Sink Aluminium Nema 17 features:
- MK8 Extruder Radiator Heatsink Printer
- Ideal for NEMA17 motors and MK7 and MK8 extruders - Dimensions 40 x 40x 11mm

67mm L shape alloy steel mounting bracket for NEMA23 3D stepper motor printer Mounting Bracket for Nema Motor 23 57mm/76mm features:
- Compatible with Nema 23 body length: 57mm and 76mm
- Material: alloy steel
- Size: 67 x 67 x 2,7 mm
- Black color
- Fit for stepper motor as NEMA23

Mounting Bracket for Nema Engine 17 42mm features:
- Steel bracket for PAP Nema 17 3D printer motor
- Mounting bracket of 42mm L shape alloy steel for The NEMA17 3D Stepper Motor Printer
- Material: Alloy Steel - Size: 5 x 5 x 5cm
- Black Color
- Fit for 42mm Stepper Motor as NEMA17

One of the most popular stepper motors with 200 steps per revolution and a maximum load of 5 kg/cm. It comes with a 30 cm cable. We have the best stepper motors at the best prices!

It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 28.5 kg/cm. Comes with a 50 cm cable. We have the best stepper motors at the best prices! Perfect for CNC machines!

Dupont female-female connector cable to PH2.00 for Nema engine features:
Dupont 2.54 female to PH2.00 female connecting cable for Nema motor Length 100cm

Small 3V-6V DC motor ideal for DIY projects

Small 3V-6V DC motor ideal for DIY projects

Small 3V-6V DC motor ideal for DIY projects

Gear Reducer Motor 5V DC 148 Robot Support Arduino Smart Car features:

- Voltage: 3 to 6Vdc

- Speed without load: 100 RPM to 6Vdc

- No-load current: 90mA to 3Vdc - 180mA to 6Vdc

- Reduction: 1:48

- Content:

* 1 unit - direct current motor

* 1 unit - support with screws

Black U-shaped servo motor mounting bracket for MG995 and MG996 servo motors. Ideal for robot arms or creating your own structures. Includes hardware.

A sliding ring capable of holding up to 12 wires of 12mm diameter.

A slip ring capable of holding up to 6 wires of 22mm diameter.

Wheels for 360 degree continuous rotation servo motors type SG90, FS90R, SG92r. The wheels have silicone tyres and measure 60 mm (2.36″) in diameter. Four additional mounting holes for 4-40 bolts allow the wheel to be used with several of our universal mounting bracket.

It is one of the most popular stepper motors with 200 steps per revolution and a maximum load of 2.6 kg/cm (0.25 Nm). It is supplied with a voltage of 12.0 V, consumes a current of 400 mA per coil. Dimensions: 42 x 42 x 34 mm (NEMA 17).  Comes with a 30 cm cable. We have the best stepper motors at the best prices!

This LED shield goes in set with the MyoWare Muscle Sensor. It is a 10-segment bar graph showing the reads from the sensor. Put the two together and you get a great system that allows you to measure and show your muscle activity. Pretty cool, huh? The shield comes equipped with a LiPo power source making it full autonomous.

This sensor from Advancer Technologies is an improved version of the bestseller from this producer. It got several upgrades including single supply voltage of 3.1V up to 5V, polarity protection in the power pins output and RAW EMG. 

Sparkfun sensor  MyoWare® 2.0 from Advancer Technologies is a newer version of this producer's bestseller. The MyoWare 2.0 muscle sensor included in this kit has been redesigned from the ground up with a new compact and easy-to-use design, and has been updated with the latest, most advanced chipset to improve sensor performance and reliability. In addition, MyoWare has developed a range of shields that work with the sensor (in our LED shield offering, displaying sensor readings as LED lights).

Sparkfun MyoWare 2.0 Muscle Sensor Development Kit  is an all-in-one electromyography (EMG) sensor kit compatible with Arduino. Just snap on a MyoWare 2.0 Shield, add some EMG sensor pads, connect the sensor to a muscle group and flex! The kit also includes the SparkFun RedBoard Plus is an Arduino compatible board and the MyoWare 2.0 Arduino Shield to connect the MyoWare® 2.0 sensor via a cable to the Arduino.