Red Laser Diode Module 650nm 5mW 6mm 5V lL2N4 This module adapted for the arduino includes a laser diode and a 3-pin connector for a simple and quick adaptation with the Arduino. The diode is mainly used for laser toys, all kinds of level meter, instruments, stylus pen, mini LCD projector, remote listeners laser, alarm anti-theft light remote control. Light shots and different display can make the color of the image element a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC - Connector of 3 pins: 1- GND 2- VCC 3- Light control of the laser diode - Point mode: point facula - Continuous output - Operating temperature: -36 ° C - + 65 ° C - Laser wavelength: 650nm (red) Code M0077 Available Price €1.49
SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output The DC-DC 25A solid state relay has a 3-32VDC input and a 6-60VDC output. It has a maximum load capacity of 25A. It has a long operating life and high reliability, a compact size. This relay switches very quickly. Fotek SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output Code RL017 Available Price €7.99
Arduino compatible UNO R3 board - It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features: - Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal - Microprocessor: ATmega328 - Operating voltage: 5V - Input voltage (recommended): 7-12V - Input voltage (limits): 6-20V - Clock speed: 16 MHz - Digital I / O Pins: 14 - Analog input pins: 6 - DC current per I / O Pin: 40 mA - DC Current per Pin 3.3V: 50 mA - Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328 - SRAM 2 KB - Atmega328 Code B0009 Available Price €9.95
Micro Motor 3V 5V 6V DC with cable conector male For Arduino, Smart Car, Robotics.Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC with cable conector male features: - Operating voltage: 1.5V to 6V - Cable 16cm with male connector - DC current: 350mA - Torque max.: 15g / cm- Max speed: 12000rpm- Weight: 16.5 g Code R0080 Available Regular price €1.95 -€0.26 Price €1.69
HC-SR501 Motion Detector Module Passive Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º. An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features: - Infrared sensor with control circuit - Adjustable sensitivity and time - Operating voltage: 4.5V- 20V - Consumption in Idle state: Code S0003 Available Price €1.79
40x Male to male cables 20cm Characteristic: -Length: 20cm -Quantity: 40 cables -Mono Dupont connectors on both ends -Compatible with 2.54mm female connectors -High quality and good working condition -Easy to install and use Code K0006 Available Price €2.49
GPS Module GY-GPS6MV2 NEO6MV2 EEPROM with Antenna It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the beginning 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna 18x18 mm - Size: 22x30x13 mm Code M0071 ✗ Out-of-Stock Price €15.90
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €9.95 -€1.30 Price €8.65
Servo Extension Lead Wire Cable 300mm JR Futaba Servo Extension Lead Wire Cable 300mm JR Futaba features:- Cable length: 300mm Code R0023 ✗ Out-of-Stock Price €1.75
Micro Servo Compatible with MG90S Micro Servo Compatible with MG90S features: - Operating voltage: 4.8Vdc (5V) or 6Vdc - Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V - Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V - Gear type: metallic - Turning width: 180º - Temperature working: from -30 to 60 ºC - 3 plastic propellers / arms - Fixing screws - Size: 22.6 x 11.8 x 31 mm - Weight: 13.4 gr Code R0015 Available Price €3.99
Micro Digital Servo Right Symmetry 1.5g 4.8V This right symmetry micro digital servo is of excellent quality and very light weight. Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0002 Available Price €8.49
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.59
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
Servo Motor Type S3003 Aeromodelling Servo Motor Type S3003 Aeromodelling features: - Operating voltage: 4.8 V to 6 V - Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V) - Max radius: 180 ° (90º in each direction) - Temperature range: - 20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese Manufacture Code R0017 Available Price €6.29
LSC-16 Digital Servo Motor Controller 16 channels LSC-16 Digital Servo Motor Controller 16 channels features: - With current limiting protection. The servo output is isolated from the CPU to prevent increased servo current causing damage to the CPU. - CPU using high performance STM32 single chip microcomputer with ARM Cortex-M3 corer, control High precision 16-channel servo movement, adjustable speed. - 16M high capacity memory, enough for your use! It can contain 230 action groups! Each action group can hold up to 510 actions! - Supports online debugging, no need to install any driver by yourself (Install Drivers Automatically). - 0 ~ 3rd and 12th - 15th servo interface have over current protection! Greatly reducing the risk of burned servo due to locked rotor. Code R0046 Available Regular price €25.80 -€2.00 Price €23.80
Servo Driver for micro:bit, 16-Channel, 12-bit The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice. Code WV007 Available Price €21.95
Servo Extension Lead Wire Cable 50cm JR Futaba Servo Extension Lead Wire Cable 50cm JR Futaba features:- Cable length: 50cm Code R0027 Available Price €1.95
Slip ring mini 12mm diameter 12 wires A sliding ring capable of holding up to 12 wires of 12mm diameter. Code R0092 Backorder Price €33.95
Servo Extension Lead Wire Cable 300mm JR Futaba Servo Extension Lead Wire Cable 300mm JR Futaba features:- Cable length: 300mm Code R0023 ✗ Out-of-Stock Price €1.75
Micro Servo Compatible with MG90S Micro Servo Compatible with MG90S features: - Operating voltage: 4.8Vdc (5V) or 6Vdc - Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V - Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V - Gear type: metallic - Turning width: 180º - Temperature working: from -30 to 60 ºC - 3 plastic propellers / arms - Fixing screws - Size: 22.6 x 11.8 x 31 mm - Weight: 13.4 gr Code R0015 Available Price €3.99
Micro Digital Servo Right Symmetry 1.5g 4.8V This right symmetry micro digital servo is of excellent quality and very light weight. Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0002 Available Price €8.49
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.59
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
Servo Motor Type S3003 Aeromodelling Servo Motor Type S3003 Aeromodelling features: - Operating voltage: 4.8 V to 6 V - Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V) - Max radius: 180 ° (90º in each direction) - Temperature range: - 20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese Manufacture Code R0017 Available Price €6.29
LSC-16 Digital Servo Motor Controller 16 channels LSC-16 Digital Servo Motor Controller 16 channels features: - With current limiting protection. The servo output is isolated from the CPU to prevent increased servo current causing damage to the CPU. - CPU using high performance STM32 single chip microcomputer with ARM Cortex-M3 corer, control High precision 16-channel servo movement, adjustable speed. - 16M high capacity memory, enough for your use! It can contain 230 action groups! Each action group can hold up to 510 actions! - Supports online debugging, no need to install any driver by yourself (Install Drivers Automatically). - 0 ~ 3rd and 12th - 15th servo interface have over current protection! Greatly reducing the risk of burned servo due to locked rotor. Code R0046 Available Regular price €25.80 -€2.00 Price €23.80
Servo Driver for micro:bit, 16-Channel, 12-bit The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice. Code WV007 Available Price €21.95
Servo Extension Lead Wire Cable 50cm JR Futaba Servo Extension Lead Wire Cable 50cm JR Futaba features:- Cable length: 50cm Code R0027 Available Price €1.95
Slip ring mini 12mm diameter 12 wires A sliding ring capable of holding up to 12 wires of 12mm diameter. Code R0092 Backorder Price €33.95