Robotics

Tower Pro Micro Servo 9g SG90 features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

Pack 10pcs of micro servo 9g SG90.

9g digital servo new version of SG90.
POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque.
It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features:
Weight: 9g
Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v)
Gear type: POM with carbon fiber
Operating speed: 0.1sec /60degree (4.8v)
Temperature range: 0„ƒ_ 55„ƒ
Dead band width:1us
servo wire length: 25 cm
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm

Servo Motor Type S3003 Aeromodelling features:
- Operating voltage: 4.8 V to 6 V
- Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V)
- Max radius: 180 ° (90º in each direction)
- Temperature range: - 20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR - Chinese Manufacture

Servo with Rotation 180 Servo Motor Type S3003 features:
- Model Aircraft Futaba Arduino Robotics
- Operating Voltage: 4.8V to 6V
- Max Torque: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V)
- Max radius: 180º
- Temperature range: -20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacturing

Continous Rotation 360 Degree Servo S3003 features:
- Operating voltage: 4.8 V to 6 V
- Torque max.: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)
- Radio max.: 360º
- Temperature range: -20º + 60ºC degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacture

Micro Servo Compatible with MG90S features:
- Operating voltage: 4.8Vdc (5V) or 6Vdc
- Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V
- Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V
- Gear type: metallic
- Turning width: 180º
- Temperature working: from -30 to 60 ºC
- 3 plastic propellers / arms
- Fixing screws
- Size: 22.6 x 11.8 x 31 mm
- Weight: 13.4 gr

This right symmetry micro digital servo is of excellent quality and very light weight.
Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right
- Plug: 1- red wire: positive polarity (+)
2- black wire: negative polarity (-)
3- white wire: control signal
- Model: GS-1502 - Type: Analog Servo
- Rotation angle: 180 °
- Torque:
- 0.20kg / cm if Vin = 4.8V
- 0.24kg / cm if Vin = 6V
- Speed:
- 0.11sec if Vin = 4.8V
- 0.09sec if Vin = 6V
- Operating voltage: 3.7V-5V - Material type: Nylon
- PCB size: 21x15x12 mm

This left symmetry micro-digital servo is of excellent quality and very light.
Its high speed and rotational capacity is great Advantage for developing sensitive projects with quick response. Characteristic: - Symmetry of the servo: for left incorporation
- Plug: 1- red wire: positive polarity (+)
2- black wire: negative polarity (-)
3- white wire: control signal
- Model: GS-1502 - Type: Analog Servo
- Rotation angle: 180 °
- Torque:
- 0.20kg / cm if Vin = 4.8V
- 0.24kg / cm if Vin = 6V
- Speed:
- 0.11sec if Vin = 4.8V
- 0.09sec if Vin = 6V
- Operating voltage: 3.7V-5V - Material type: Nylon
- PCB size: 21x15x12 mm

High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features:
- Operating voltage: 4.8 V to 7.2 V
- Consumption: 100mA
- Torque max.: 12kg / cm (6V)
- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)
- Max. Radio: 180ºC
- Temperature range: 0-55 degrees
- Weight: 55 g
- Cable length: 29cm
- Dimensions: 54 x38x 20 mm
- Servo connector: JR (JR and Futaba adaptable)

LSC-16 Digital Servo Motor Controller 16 channels features:
- With current limiting protection. The servo output is isolated from the CPU to prevent increased servo current causing damage to the CPU.
- CPU using high performance STM32 single chip microcomputer with ARM Cortex-M3 corer, control High precision 16-channel servo movement, adjustable speed.
- 16M high capacity memory, enough for your use! It can contain 230 action groups! Each action group can hold up to 510 actions!
- Supports online debugging, no need to install any driver by yourself (Install Drivers Automatically).
- 0 ~ 3rd and 12th - 15th servo interface have over current protection! Greatly reducing the risk of burned servo due to locked rotor.

This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos.
It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity.
PCA9685 digital servo motor controller 16 channel PWM features:

- Supply voltage: 3-5 VDC,
- Maximum motor voltage: 6 VDC,
- Number of channels: 16,
- Resolution per channel: 12 bits,
- Interface: I2C,
- Working frequencies: 40-1000 Hz,
- PCB size: 62.3x25.3mm .

Servo Extension Lead Wire Cable 50cm JR Futaba features:
- Cable length: 50cm

Servo Extension Lead Wire Cable 300mm JR Futaba features:
- Cable length: 300mm

Servo Extension Lead Wire Cable 200mm JR Futaba features:
- Cable length: 200mm

Servo Extension Lead Wire Cable 150mm JR Futaba features:
- Cable length: 150mm

Servos Tester features:
- 3-Channel Tester
- For Electronica Arduino

Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV features:
- Platform for Arduino Robotics Modeling, works with servo 9g SG90
- Servos not included

Metal disc diameter 25mm with 4 mounting holes for 25T RC MG996R servos
25T metal disc for MG996R servomotors + 4 screws features:

- Material: Aluminum
- Gear teeth: 25T
- 4x M3 mounting holes rotated
- Diameter disc: 25mm
- Includes: 4 fixing screws.

Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features:
- 25T Servo Arm for Futaba, Tower Pro and High Power Servos
- Material: Aluminum
- Color: red
- Size: 35.5 x 15 x 6mm
- Weight: 4 grams
- M3 thread for joints of cars or helicopters.
- Hole distance 20 and 24 mm from the servo outlet.
- Quantity: 1 unit

Tower Pro Micro Servo 9g SG90 360 degree features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

A sliding ring capable of holding up to 12 wires of 12mm diameter.

A slip ring capable of holding up to 6 wires of 22mm diameter.

The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice.