The zirconium ceramic tip of the CD-200/201 combines the wear resistance of a metal tip with the non-conductive and non-inductive properties of the plastic.
Ceramic alignment tool CD-20 features:
- Length: 11.5 cm,
- Screwdriver tip: flat,
- Tip length: 2mm.
- Suitable for: potentiometers, watchmaking, electronics components.

Professional processor charger XTAR PB2S for Li-ion 18650/(20700/21700 - unprotected only) batteries with power bank function.

The Circuit Scribe conductive ink pen, with its simple design, is perfect for this, allowing you to draw circuits instead of soldering or connecting them to a test board.  

CNC Shield + UNO R3 CH340 +4x A4988 Stepstick 3D Printer Arduino kit features:
- Content:
* 1x UNO R3 CH340 Compatible with Arduino
* 1x CNC Shield V3
* 4x A4988 Drivers
* 4x Heatsinks for A4988
* Jumpers

Compact instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute)

Organise your resistors, capacitors, transistors and all kinds of electronic components in this practical organiser drawer with 16 compartments. It is perfect for workshops, garages and basements, with the possibility of hanging on the wall and linking with others.

With this 32 in 1 construction kit you can build all 32 options or develop your imagination by building your own project.

Note: the micro:bit board is not included, you can buy it separately.

Continous Rotation 360 Degree Servo S3003 features:
- Operating voltage: 4.8 V to 6 V
- Torque max.: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)
- Radio max.: 360º
- Temperature range: -20º + 60ºC degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacture

Ammeter 0-1 A (DC) with needle model 91C16 transparent with integrated shunt.
DC 0-1A Analog Ammeter 91C16 class 5 features:
- Model: 91C16
- Scale range: 0-1A (DC)
- Accuracy: class 5
- Transparent color
- External size: 4 x 4 x 1.1cm
- Panel size: 3.4 x 1.8 x 0.4cm
- Integrated shunt

Ammeter 0-5 A (DC) with needle model 91C16 transparent with integrated shunt.
DC 0-5A Analog Ammeter 91C16 class 5 features:
- Model: 91C16
- Scale range: 0-5A (DC)
- Accuracy: class 5
- Transparent color
- External size: 4 x 4 x 1.1cm
- Panel size: 3.4 x 1.8 x 0.4cm
- Integrated shunt

DC Gear Motor 6V 148 Arduino features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Reduction: 1:48

DC Gear Motor N20 200 RPM 12V DIY Robot features:
- Voltage: 12V
- Speed of rotation: 200RPM
- Motor dimensions:
* Diameter 12 mm
* Height 24 mm
- For Arduino, Smart Car, Robotics, Fans, Appliances

Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes

The micro:bit Maqueen educational programming robot platform is a simple to use programming robot for STEAM education, which inherits the playability and easily understandable operation of micro:bit. With a mini body, for play and tinkering, it allows students to quickly learn graphical programming in an entertaining way, while nurturing their interests in science and logical thinking.

- The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement - This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree
Characteristic:
- Operating voltage: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy
- Maximum sampling rate: 2 seconds
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Write texts on the OLED 0.96 '' screen
- Read the measurements of the temperature / humidity sensor DHT22 / AM2302 on a 0.96 '' OLED screen
Send />

UT100 series is specially designed for automobile diagnosis. Combines RPM, DWELL, and other multimeter functions. The series is useful for car maintenance personnel to diagnose traditional vehicles and hybrid electric vehicles. Applications: Its applications include working on fuses, switches, solenoids, relays, charging systems, fuel systems, engine detection, etc.

Three-axis electromagnetic field sensor module GY-273 including the HMC5883L chip that specifies the direction of the magnetic field of the ground.
Digital Compass GY-273 Compas Magnetometer features:

• Supply voltage: 2.16 - 3.6 VDC,
• I2C interface with SCL, SDA,
• signals - Measurement range: 1.3 to 8 Gauss,
• Measurement resolution: 12 bits,
• Measurement accuracy: 0.73 - 4.35 Gauss,
• Transmission speed 400kHz, 
• Sensitivity 230-1370 LSB / Gs,
• Output frequency: 75Hz,
• DRDY pin interruption,
• Dimensions of 18 mm x 13 mm.

With this small and simple device, you can control your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply insert your finger and wait for the reading of haemoglobin (Spo2), heart rate and Perfusion Index (PI%). The heart rate is also graphically displayed. 

You can rotate the screen to see it in its 4 positions. High precision device, with low power consumption and automatic shutdown. 

Ambient light sensor meter, with a measuring range of 0-199990 Lux. Widely used in agriculture, laboratories, offices and more industrial sectors.

Digital microscope with 500x zoom, 8 LED lights and support for microscope included.
Discover the emotion of a completely new microscopic world, totally hidden from the naked eye.
This USB digital microscope can magnify objects up to 500 times its original size and uses a dynamic image sensor and eight super bright white LED lights to create detailed images.
Connect the microscope to your computer via USB and admire each image on your screen.
You can see details like skin pores, individual cotton threads, milky clouds or amber inside THC crystals or even small scratches in a collectable coin that would be impossible to detect with the naked eye, can be easily seen with this amazing USB digital microscope.

UT353 mini digital sound level meters can convert ambient sound into electric signals, process data and display results on LCD. They can constantly monitor ambient sound.

The main features are white backlight, clear LCD screen, adjustable sampling rate, fast/slow, 1/2 inch condenser microphone.

Light weight, ergonomic design, user-friendly interface.

DT321B Digital Multimeter, Portable Multimeter, AC / DC Voltage Meter, Blue Backlight, Battery tester, Transistors tester, Acoustic Continuity Tester.

The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display

Digital Voltmeter Green 0-200V DC 0.56 features:
- 3-wire recessed LED Voltmeter
- No battery needed
- Measurement range: 0-200 Vdc
- Supply voltage: 4.5-30 Vdc
- Screen: 0.56 € Green Led
- Color: Black
- Includes reverse polarity protection
- Operating current:

Display OLED 0.96" 128x64 White I2C 4 Pin features:
- Interface: I2C (logical level 3.3V)
- Resolution: 128x64
- Angle of view:> 160 degree
- Screen color: white
- Screen Dimension: 2.43cm / 0.96 "
- IC Controller: SSD1306
- Power supply: 3.3V - 5VDC
- Operating temperature: -20 ° C - 70 ° C
- Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 "
- Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ...
- It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface.
- The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver.

Laser distance meter with a range of 18 metres. Additional functions of this rangefinder are a spirit level, measure surface area and measure volume.

Super simple laser distance meter with a range of 20 metres and high accuracy.

Functions:

automatic switch-off

single measurement

laser pointer

Simple laser distance meter with a range of 60 metres. The LM series laser distance meters are portable devices that can easily and accurately measure length, area and volume at the push of a button.

Ideal for your arduino projects, but can also be used with other microcontrollers. Double Joystick Module 2 Axis XY PS2 features:
- Two axes (XY)
- Return to the center
- Central push button
- Connections: + 5Vcc / GND / VRx / VRy / SW
- Dimensions: 4 x 2.6 x 3.2cm

This module is a dust sensor capable of detecting more than one micron of dust particles.
It has two types of output: output of 4V high-level signal for a clean environment and 0.7V low-level signal for a particle-laden environment.
Its power supply is 5VDC and the particle detection range is maximum at 8000 units per 283ml. Dust Sensor Module PPD42NS PM2.5 features:
- Supply voltage: 5VDC
- Working current: 90mA
- Sensitivity: 0.5V / ( 0.1 mg / m3)
- Particle detection minimum value: 1 micron
- Output mode: Hi = 4V impulses (clean environment); Lo = 0.7V (charged environment)
- Temperature working: 0-45 ° C
- Working humidity: 0-90% RH
- PCB size: 59x45x22 mm

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features:
- Interface type: USB
- Supports IEEE 802.11e draft 802.11n
- Supports USB 2.0, compatible with USB 1.1 and 1.2
- Support systems:
- Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux
- Operating distance: 91 meters indoors, 275 meters in open space
- Transfer rate: 150Mbps (downlink) and 150Mbps (uplink)
- Works with old Wireless-G and Wireless-B networks
- WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM
- Frequency range: 2.4 to 2.4835 GHz
- Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment
- Transmission mode: DSSS

Turn everything into a "keyboard" thanks to the Bitboard.

Easy to install for the electric door lock or other automatic door lock systems with the mounting board.

Draw circuits, sensors or simply replace wires with this electrically conductive paint. Stimulate children's creativity and manual skills, with the assembly of simple and safe circuits, thanks to this conductive paint. This Electric Paint is a conductive paint that can be used mainly for repairing breaks, cold welding or drawing circuits on a small scale. It is as easy as squeezing the tube, drawing a line of paint on a surface, connecting components and power, and you have an electric circuit in a totally original way.

Mini electric drill useful for precise tasks during DIY prototyping. The electric drill speed: approx. 9000 rpm, powered by 5V USB. maximum current 2A. 

The 908S 80W soldering iron has a power of 80W equipped with the 900M-B1.2 tip, LCD display to show the temperature setting (180 ~ 500 ℃). Fast heating. The tip is replaceable. The soldering iron is CE, RoHS certified. The kit includes 5 replacement tips and a welding holder.

Kit electronic components for Arduino UNO Mega.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x Protoboard Breadbord 400 points Arduino
- 20x Male-Male Cables 20cm Jumpers Dupont 2,54
- 1x LED Diode Assortment Kit 30 pcs 5mm red, green, yellow
- Resistors:
 - 10x Resistors 200R Ohm 5% 0,25W 1/4W
 - 10x Resistors 1K Ohm 5% 0,25W 1/4W
 - 10x Resistors 10K Ohm 5% 0,25W 1/4W
 - 10x Resistors 100K Ohm 5% 0,25W 1/4W
- 2x Photoresistor GL5516 LDR
- Push switch buttons:
 - 1x Push Switch Button B3F Omron Blue Key 12mm

  IP65 waterproof case ideal for electronic projects, energy supplies, student projects, amplifiers.   Electronic waterproof plastic cover features:
  - Material: extruded plastic,
- Waterproof protective indication: IP65,
- Includes 4 screws and waterproof assembly,
- Size external: 158x90x60mm, - Dimension internal: 158x90x60mm,
- Weight: approx. 190g

ESD compatible gloves made of polyester with woven conductive fibres.

WROOM-32 DEVKIT V1 is an ESP32 processor development board with WiFi and Bluetooth (BLE). It is much faster than the ESP8266 processor (NodeMCU and similar), and very easy to use, with 2x15 pins.

Mini UNE ATMega328 basic kit for Arduino to learn programming.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.

Mini electricity generator, built base on a turbine and an electric generator that converts kinetic energy into electricity. The generator output is rectified and regulated for a maximum of 12V. Please note -if we want to generate more current, the turbine will oppose the greater resistance to the flow of water, and the voltage may drop if the water flow is not sufficient. This generator is made of plastic and the turbine is totally isolated from the generator and rectifier, the outputs are 1/2 "usually found in domestic pipes.

Characteristic: - Voltage: 12V
- Consumption: 120mA
- Speed: 4800rpm -5600rpm
- Noise level: 25dB ± 10%
- Screw diameter: 4.5mm
- Life time: 40000 hours
- Operating temperature: -10 ° C to 65 ° C
- Length Cable: 28cm
- Dimensions: 40mm x 40mm x 20mm
- For cooling MK8 hotels

Fan 12V 2x Cables PC CPU case features:
- Voltage: 12V
- Consumption: 0.28A
- Screw diameter: 3.5mm
- Life time useful: 30,000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 24.5cm
- Dimensions: 80mm x 80mm x 15mm

FDY10-S is a new measuring device with integrated double function, detection and measurement.
During discharge, the LED shows the voltage, the current, the power in real time. After completing the battery discharge, it will display the results of the measurement, such as the download time.
The host and the heating elements are separated, high stability.
The measurement error is minimal and the most accurate results are due to the application of the measurement mode of the 4-wire system.
Availability to configure the automatic slide show function to verify visually and clearly the operating states and parameters, due to the display mode based on the combination of the LED indicator light.
Operation sound indication and alarm for the end of the discharge.

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D Graphite color Grafito

Premium Bobina para Impresora 3D Gray color Gris

Premium Bobina para Impresora 3D Red color

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

Premium Bobina para Impresora 3D

The cables are in 10 different colors Flat Cable 1m AWG28 1.27 10 Pins Colors features:
- Length: 100cm
- Model AWG28
- Product name: Flat cable
- Number of conductors: 10
- Conductive material: Copper
- Insulation voltage: 300V - Inner diameter 0.32mm
- Pin Pitch: 1.27mm
- Temperature: 105 ° C

Flexible Coupler 5mm/10mm Z-axis CNC 3D Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 10mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm

Flexible Coupler 5mm/6.35mm Z-Axis 3D CNC Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 6.35 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 6.35mm - Quantity 2units

High quality flexible aluminum coupler, so you can join Nema 17, 6.35mm stepper motors to an 8mm threaded rod. They incorporate 4 captive screws so you can perfectly fix the couplings to the rod. Flexible Coupler 6.35mm/8mm shaft features:
- Material: Aluminum alloy
- Coupler height ( L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6.35mm / 8mm - Quantity 2 units

High quality flexible aluminum coupler, so you can join Nema 17, 6mm stepper motors to a 10mm threaded rod. They incorporate 4 screws studs so you can perfectly fix the couplings to the rod. Flexible Coupler 6mm/10mm shaft features:
- Material: Aluminum alloy
- Coupler height (L ): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 10mm - Quantity 2units

Flexible Coupler 6mm/8mm CNC 3D Printer Shaft features:
- Flexible coupling in high quality aluminum with which you can join Nema 17, 6mm stepper motors to an 8 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 8mm